User manual

Parent Unit Menu Options 17

ENGLISH

4.6 Set Screen Off time for the Parent Unit

When the Parent Unit is operating on battery only, the screen turns off if no

buttons are pressed for a specific time interval, to help extend the battery

operation time. The audio will still be heard even when the screen is off. You can

change the screen off time to 5mins, 30mins or 60mins.

1. Press M when the Parent Unit is in camera viewing mode.

2. Press or to scroll to .

3. Press or to select (

60mins

30mins

5mins

OFF

4. Press O to confirm your selection.

4.7 Zoom

You can zoom in or out while viewing the image from a Baby Unit.

1. Press to zoom in.

2. Press to zoom out.

4.8 Pair and Replace a Baby Unit

The Baby Units and Parent Unit provided are already paired. You can add or

replace a Baby Unit in your video and audio monitoring system.

You can pair a maximum of four Baby Units to your Parent Unit. Each new Baby

Unit must be paired to the Parent Unit before use and can only be paired with a

vacant location on the Parent Unit.

To pair a Baby Unit:

1. Press M when the Parent Unit is in camera viewing mode.

2. Press or to scroll to .

3. Press or to select

add

4. Press or to choose a desired Baby Unit number.

5. Press O to put the Parent Unit into pairing mode.

6. Tur n on th e ne w Ba by Un i t, and then immediately press and hold Pair until

the Power/Link indicator turns on.

NOTE

You cannot choose a Baby Unit number that is already occupied, but must

remove an existing Baby Unit before pairing a new one. (See 4.5 for how to

remove a paired Baby Unit camera.)