User manual

16 Parent Unit Menu Options
4.3.1 Set lullaby
You can play melodies from the Baby Unit to comfort your baby.
1. Press M when the Parent Unit is in camera viewing mode.
2. Press or to scroll to .
3. Press or to choose your desired melody (1- 5) or turn it off (X).
4. Press O when a melody is selected, and then press or to increase
or decrease the volume of the melody playing at the Baby Unit. The Lullaby
icon appears at the top of the screen when a melody is selected.
5. Press M to save the setting and return to camera viewing mode.
4.4 Monitor the Temperature
Your Baby Unit measures the surrounding temperature, which is displayed at the
top of the Parent Unit screen. The reading only updates about once a minute,
and should only be used as a general indication of the temperature around the
Baby Unit. If the detected temperature goes beyond a preset temperature
range (14-29
o
C/57-84
o
F) the temperature display changes to red. You can
change the setting for the temperature format as follows:
4.4.1 Temperature Format
You can choose to display the temperature in °F or °C.
1. Press M when the Parent Unit is in camera viewing mode.
2. Press or to scroll to .
3. Press or to choose
°F or °C .
4. Press M to save the setting and return to camera viewing mode.
4.5 Remove a Baby Unit
1. Press M when the Parent Unit is in camera viewing mode.
2. Press or to scroll to .
3. Press or to select del.
4. Press O, then or to select the desired Baby Unit (
1 , 2 , 3 or 4 ).
5. Press O, then press or to choose
YES or NO .
6. Press O to confirm your selection.
NOTE
You cannot remove a Baby Unit if it is the only one paired.
M
O
<
>
M
O
<
>
M
O
<
>
M
O
<
>
M
O
<
>
M
O
<
>