User’s Guide Smart Monitoring Companion Models: MBP162CONNECT The features described in this guide are subject to modifications without prior notice.
Welcome... to your new Motorola Smart Monitoring Companion! Thank you for purchasing the Smart Monitoring Companion. Now you can hear your baby sleep in the room or you can monitor your older children in their playroom. You can install the Companion only from your iPhone®/ iPad® or Android™ devices and hear the Audio Stream from your PC or Notebook, as well as from your iPhone®/iPad® or Android™ devices. Please keep your original dated sales receipt for your records.
Overview of the Smart Monitoring Companion 1 2 3 5 6 4 7 1. 2. 3. 4. 5. Night Light Lights in Amber colour for local. Flashs when in pairing mode. Speaker Power indicator Lights in Green when plug the device into power socket. Power Plug Night Light button Press to turn on/off the nightlight. 6. 7. PAIR button Press and hold for 3s to enter to pairing mode. Press and hold for more than 20s to de-register from Smart Nursery App and reset to factory default.
Table of contents 1. 2. Safety Instructions .................................................................................... 5 Getting Started ......................................................................................... 6 2.1 3. 3.1 3.2 4. 5. 4 Set nightlight .............................................................................................. 7 Adjust speaker volume ............................................................................... 7 System Requirements .......
Presence of un-insulated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. WARNING: Presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. This digital audio baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use.
2. Getting Started 2.1 Connecting to the power supply The Smart Monitoring Companion powers on automatically when it is connected to the power supply. Power Plug 1. 2. 3. 6 Power Socket Choose a location with access to the electrical outlet. Plug the Unit into the suitable power outlet in your baby’s room. Ensuring sufficient clearance is given for it to detect sound and no more than 1 metre from the baby cot.
Please read these instructions carefully, and be aware that this Companion Unit is only intended as an aid. It is not a substitute for responsible, correct parental supervision. 3.1 Set nightlight The nightlight feature is intended to give the room a soft glow so the baby can be observed without disturbing it with bright lights. 1. When the nightlight is off, press to turn it on. 2. When the nightlight is on, press to turn it off. 3.
4. System Requirements Smartphones / Tablets: Android™ and iOS® only. Minimum requirement: iOS 8.0, Android 5.0 or above. For more information, please visit: https://hubbleconnected.com/ requirements.
Receive notification from any compatible device remotely How does it work? MBP162 CONNECT ENGLISH 5. Connecting Devices Wi-Fi Router Access your MBP162CONNECT locally Hubble Service When a user tries to access the Companion Unit, our secure server authenticates the user’s identity and permits access to the Companion Unit. 5.1 Setup Plug the Smart Monitoring Companion into an electrical outlet and the Unit will automatically switch on.
5.3 User Account and MBP162CONNECT setup on Android™ Devices 5.3.1 Download Hubble Connect for Smart Nursery App. • Go to Google Play™ Store to search for Hubble Connect for Smart Nursery App. • Download Hubble Connect for Smart Nursery App from Google Play™ Store and install it on your Android™ device. 5.3.2 Run Smart Nursery App on Android™ Device • Ensure that your smart device is connected to your Wi-Fi® router.
Add the MBP162CONNECT to your account AndroidTM • Tap on Audio Monitors then tap MBP162 to add the device, read through the features of MBP162CONNECT or tap on Skip to setup . (Pictures A3, A4, A5) ENGLISH 5.3.3 A3 A4 A5 • Press and hold the PAIR button at the front of MBP162CONNECT, the nightlight blinks in amber alternately indicating that the device is ready for pairing.
• Tap Next , the App will automatically search for your device as shown in the picture below. (Pictures A6, A7). A6 A7 • Tap the device SSID ( AudioMonitor-0162XXXXXX ) to connect to the App. (Picture A8) • Tap Next to search for the Wi-Fi router.
AndroidTM ENGLISH • Select your Wi-Fi® network, enter your password and then tap Search. (Picture A10) A10 A11 • It will take a few minutes for the device to connect to the Wi-Fi® the device is successfully registered to your Samrt Nusery account. (Picture A11) • If connection fails, please tap Retry and repeat the steps starting from steps 5.3.3.
5.4 User Account and MBP162CONNECT setup on iOS® Devices 5.4.1 Download Hubble Connect for Smart Nursery App • Go to App Store to search for "Hubble Connect for Smart Nursery" App. • Download "Hubble Connect for Smart Nursery" App and install it on your iOS® device. 5.4.2 Run Smart Nursery App on your iOS® Device • Ensure that your iOS® device is connected to your Wi-Fi® Router.
Add the MBP162CONNECT to your account ENGLISH 5.4.3 iOS® • Tap on Audio Monitors the tap MBP162 to add the device, read through the features of MBP162CONNECT or tap on Skip to setup . (Pictures i3, i4, i5) i3 i4 i5 • The following setup instructions will appear on the screen.
• Press and hold the PAIR button at the front of MBP162CONNECT, the nightlight blinks in amber colour alternately indicating that the device is ready for pairing. The unit also bleeped three times and the Power LED switched off then on again. • Go to Settings > Wi-Fi menu on your iOS® device. (Picture i8). • Select your device SSID (AudioMonitor-0162XXXXXX) from the list of networks. (Picture i9).
ENGLISH iOS® • Press Home Key to return back, tap the Smart Nursery app to resume setup, the SSID will be detected on your iOS device.(Picture 10) • Tap NEXT • Select your Wi-Fi® network and tap Search.
• Enter your Wi-Fi® password and tap OK. (Picture i12) i12 i13 • It will take a few minutes for the device to connect to the Wi-Fi® network, the device is successfully registered to your Samrt Nusery account. (Picture i13) • If connection fails, please tap Retry and repeat the steps starting from 5.4.
Reset the Smart Monitoring Companion Note: If your Companion Unit is moved from one router (e.g. home) to another (e.g. office) or you have setup issues, then the Unit must be reset. • Press and hold PAIR button for more than 20s to enter to deregister mode and perform factory default. You will hear a series of bleeps as you hold the button. After 20 seconds the unit will re-initialise. When it is ready the night light will flash ready for pairing.
6. Disposal of the Device (Environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
Clean your Smart Monitoring Companion with a slightly damp cloth or with an antistatic cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the Smart Monitoring Companion with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your Smart Monitoring Companion away from hot, humid areas or strong sunlight, and do not let it get wet.
8. Troubleshooting Problem Category Problem Description / Error Solution Account I am unable to login Please check your user name and even after registration. password. Account I receive an error message saying: "E-mail ID is not registered". Account What do I do if I forget Click on the "Forgot Password" link on my password? https://app.hubbleconnected.com/ #lostpassword OR on your Android™ or iOS application. An e-mail will be sent to your registered e-mail address.
During setup on devices for Android™ and iOS, I am not able to find my Device during the last step and the setup fails. Please reset the Device to setup mode and try again. Press and hold the PAIR button on the front of the Device until you hear a beep. Wait for a minute for the Device to restart. When the Night Light is flashing, this indicates that it is in setup mode. Now restart the setup from your smartphone again. 1. Connectivity I get a message: We Issues are having problems accessing your Device.
General How do I download the Android™: App for Android™ and - Open the Google Play on your iOS devices? Android™ device.
ENGLISH 9. General Information If your product is not working properly... 1. 2. Read this User's Guide or the Quick Start Guide. Contact Customer Service at +491805 938 802 in Europe Email: motorola-mbp@tdm.de If you think you need a battery replacement, please contact customer service.
Who is covered? This Warranty extends only to the first consumer purchaser, and is not transferable. What will BINATONE do? BINATONE or its authorised distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
Consumer Accessories Consumer Products and Accessories that are Repaired or Replaced Length of Coverage Two (2) years from the date of the products original purchase by the first consumer purchaser of the product. Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
Hereby, Binatone Telecom PLC declares that the radio equipment type is in compliance with RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available on the website : www.motorolastore.com/support.
10.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo is trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play and Android are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance.
