Technical information

AN2317/D

Low-Cost MON08 Software

Low-Cost Programming and Debugging Options for M68HC08 MCUs 19

PROG08SZ Programming the FLASH on an M68HC908 is relatively easy with the

PROG08SZ component. Simply open the WinIDE, then develop and assemble

your code. When your MON08 interface is attached between the PC and target

board, select the programmer icon (lightning bolt). The PROG08SZ

programmer launches and configures the PC’s COM port. Depending on the

type of MON08 interface, a power cycle dialog box may appear to ask you to

turn power off then on to your board. (The Cyclone and Multilink can perform

this operation for you.) PROG08 then prompts you to choose a programming

algorithm from a file window. Monitor mode communication is established

automatically and the programmer window (Figure 11) appears.

Figure 11. Select Port, Baud, and Security Bytes

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com