Specifications

VP ONCORE COMMAND REFERENCE
Back to Index
PSEUDORANGE CORRECTION OUTPUT
MESSAGE (@@Bh)
This parameter sets the rate at which pseudorange corrections are
output from the Motorola VP GPS receiver using the binary @@Ce
message format.
The pseudorange correction response message allows the VP to be
used as a master site receiver in a real-time differential system. The
message is structured to return pseudorange and pseudorange rate
corrections for up to six receiver channels, and identifies the satellite ID
that corresponds to each channel. To use this output properly, the
receiver must have the Position-Hold option enabled (see @@At
command) with the current GPS receiver position coordinates entered
using the Position-Hold-Position command (see @@As command.)
The assignment of satellites to channels is accomplished during normal
receiver operation (or may done manually.)
Helpful Note: although the @@Ce message is only formatted to
generate corrections for up to six tracked satellites, the same message
structure is also generated by 8 Channel VP receivers. If an 8 channel
receiver is tracking and developing corrections for more than 6 satellites,
the @@Ce message is simply issued twice in succession, with any
unneeded data fields filled with zeroes.
89 Synergy Systems, LLC 05OCT01