Specifications

VP ONCORE COMMAND REFERENCE
Back to Index
UTC/GPS TIME MODE SELECT (@@Aw)
This command selects the type of time (either GPS or UTC) to be output
in the Position/Status/Data Message and to be used as the
synchronization point for the 1PPS timing pulse for timing receivers. See
Time RAIM Setup and Status Messages (@@Bn
or @@En.)
Note that if the receiver does not have the UTC parameters portion of the
almanac, then UTC will be output as being equal to GPS time. The
receiver will have the UTC parameters once an almanac has been
downloaded from the satellites.
Default Value: UTC
62 Synergy Systems, LLC 05OCT01