Specifications

VP ONCORE COMMAND REFERENCE
Back to Index
ALTITUDE-HOLD HEIGHT (@@Au)
The user can specify the receiver height for manual altitude-hold
applications. Use the Altitude-Hold Mode command to enable or disable
the altitude-hold feature. The Altitude-Hold Height is specified in units of
meters to a resolution of 0.01 meters. The user can reference the height
parameter to the GPS reference ellipsoid or to Mean Sea Level. The
datum specifying the coordinate system for the Altitude-Hold height must
be the same as the coordinate system specified by the Datum ID
currently in use by the receiver.
Default value: 0 meters
58 Synergy Systems, LLC 05OCT01