Specifications

VP ONCORE COMMAND REFERENCE
Back to Index
HEIGHT (@@Af)
This input command sets the initial height coordinate only if the VP
receiver is not yet computing a position fix, or is used to replace the
current height with a new input height while in the Position Fix mode. The
user can enter the height referred to either of the two following
references:
• GPS (WGS-84) Ellipsoid Height
• Mean Sea Level (MSL)
Range: - 1,000,00 .. 18,000.00 m
Default value: 0.00 meters
Resolution: 0.01 m
25 Synergy Systems, LLC 05OCT01