Specifications

VP ONCORE COMMAND REFERENCE
Back to Index
PSEUDORANGE CORRECTION INPUT (@@Ce)
NOTE: The input/output messages described here are available only if
VP Option ‘B’ is installed.
Enabling this option allows the VP to accept pseudorange correction
messages from a differential master site receiver. The input message is
structured to accept pseudorange and pseudorange-rate corrections for
up to six satellites. The slave receiver uses the corrections in the input
message by associating the satellite ID with the corresponding satellite
(channel) that the slave is tracking. The user can specify up to 12
satellite corrections through the use of two back-to-back input
commands. Back-to-back commands must be input with no time delay in
between.
114 Synergy Systems, LLC 05OCT01