User`s guide

Chapter 5 - I/O Commands
PULSE MODE SELECT COMMAND (@@AP)
Motorola Binary Format
Query Current Pulse Mode:
@@APxC<CR><LF>
where:
x = 1 out of range hex byte: 0xFF
C = 0xEE
Message length: 8 bytes
Complete hex string to query current Pulse Mode:
0x40 40 41 50 FF EE 0D 0A
Change current Pulse Mode:
@@APmC<CR><LF>
where:
m = mode 0x00 = 1PPS output
0x01 = 100PPS output
C = checksum
Message length: 8 bytes
Response to either command:
@@APmC<CR><LF>
where:
m = mode 0x00 = 1PPS output
0x01 = 100PPS output
C = checksum
Message length: 8 bytes
Motorola GPS Products - M12+ User's Guide Revision 6.X 09FEB05
89