User`s guide

Chapter 5 - I/O Commands
LEAP SECOND PENDING (@@Gj)
Motorola Binary Format
Query Current Leap Second Pending Status:
@@GjC<CR><LF>
where:
C = 0x2D
Message length: 7 bytes
Complete hex string to query current Leap Second Pending Status:
0x40 40 47 6A 2D 0D 0A
Response to above command:
@@GjpfyymdiffffhmsC<CR>LF>
where:
p = present leap second value
f = future leap second value
yy = year of the future leap second application
m = month of the future leap second application
d = day of the future leap second application
I = integer part of current UTC offset (seconds)
ffff = fractional part of current UTC offset (nanoseconds)
h = hour of the leap second application 0…23
m = minute of the leap second application 0…59
s = second of the leap second application 0…60
C = checksum
Message Length: 21 bytes
Motorola GPS Products - M12+ User's Guide Revision 6.X 09FEB05
153