User`s guide

Chapter 5 - I/O Commands
PSEUDO-RANGE CORRECTION DATA INPUT (@@Ce)
Motorola Binary Format
Pseudo-Range Correction Data Input (for up to six satellites):
@@Cettt ippprrd ippprrd ippprrd ippprrd ippprrd ippprrdC<CR><LF>
where:
ttt = GPS time ref 0..6047999 (0.0..604799.0)
i = SVID 0..37
0 = not used
1-37 = SVID
ppp = pseudo-range corr -1,048,576..+1,048,576cm
0.01 meter resolution (-10485.76..+10485.76m)
rr = pseudorange-rate corr -4096..4096mm/s
0.001 m/s resolution (-4.096..4.096m/s)
d = issue of data ephemeris 0..255
C = checksum
Message length: 52 bytes
Response to above command:
@@CkC<CR><LF>
where:
C = checksum
Message length: 7 bytes
Motorola GPS Products - M12+ User's Guide Revision 6.X 09FEB05
123