User`s guide

Chapter 5 - I/O Commands
PSEUDO-RANGE CORRECTION DATA INPUT (@@Ce)
Applicability: M12+ Positioning Receivers
The input message is structured to accept pseudo-range and pseudo-range-rate corrections for
up to six satellites on serial port 1. The slave receiver uses the corrections in the input message
by associating the satellite ID with the corresponding satellite (channel) that the slave is tracking.
The user can specify up to 12 satellite corrections through the use of two back-to-back input
commands. Back-to-back commands must be input with no time delay in between.
No user intervention is required in order to have the receiver accept the corrections. Naturally, the
corrections must be formatted properly or they will be ignored.
Legacy Compatibility: The @@Ce message was used in an identical manner in the Motorola GT+
and M12 receivers.
Motorola GPS Products - M12+ User's Guide Revision 6.X 09FEB05
122