User`s guide

Chapter 5 - I/O Commands
PSEUDO-RANGE CORRECTION OUTPUT REQUEST (@@Bh)
Applicability: M12+ Positioning Receiver
This parameter sets the rate at which pseudo-range corrections are output from the M12+
receiver when being used as a master site receiver in a real-time differential system. The
messages return pseudo-range and pseudo-range corrections for up to 12 receiver channels, and
identify the satellite IDs that corresponds to each channel. To use this output properly, the
receiver must have the Position-Hold option enabled with the current GPS receiver position
entered into the Position-Hold position coordinates. The assignment of satellites to channels is
accomplished during normal receiver operation (or may be done manually).
The @@Bh message structure handles data for up to six satellites. If the M12+ is tracking more
than six satellites, two consecutive messages are output with the additional channels in the
second message. Unused portions of the data structure will be filled with zeros.
Default : Message disabled
Legacy Compatibility: The @@Bh message was generated in an identical fashion by VP
receivers, and also by M12 receivers with firmware revisions of v1.3 and higher.
Motorola GPS Products - M12+ User's Guide Revision 6.X 09FEB05
112