Sewing Machine User Manual

HE-8000

4. INSTALLATION

4-7. Installing the machine head

NOTE:

The bed base (1) is made from plastic, so be careful

not to hit it with the machine head when placing the

machine head on top of it.

1. Open the hinges (2) as shown in the illustration.

Then place the machine head gently on top of the

bed base (1), while being careful not to clamp the

cords (3).

2. Install the machine head with the spring washers

(4) and bolts (5).

NOTE:

Make sure that the felt support (6) do not touch the

bed base (1).

4-8. Installing the head rest

Tap the head rest (1) into the table hole.

NOTE:

Tap the head rest securely into the table hole.

If the head rest is not pushed in as far as it will go,

the machine head will not be sufficiently stable

when it is tilted back.

(6)

(1)

(5)

(4)

(2)

(1)

(3)

2055Q

2056Q

(1)

1240Q