User Manual

To Disable Strobe: Cleaning Procedure
Warning:
Do NOT use solvents to clean your RSM
as most chemicals may permanently
damage the RSM housing and textures.
Do NOT submerge the RSM in the
detergent solution.
To clean the external surfaces of your
radio, follow the next procedures:
1. Vacuum the front surface of the RSM.
Avoid completely covering the
speaker grill and microphone
openings all at once with the nozzle.
2. Mix one teaspoon of mild dish-
washing detergent to one gallon of
water (0.5% solution) to clean the
external surfaces of the RSM.
3. Apply the solution sparingly with a
stiff, non-metallic, short bristled brush,
making sure excess detergent
does not get entrapped near the
connectors, controls or crevices. Dry
the RSM thoroughly with a soft,
lint-free cloth.
Orange
Programmable
Button:
Glowing ORANGE
Strobe:
Press and hold to turn
on white Strobe.
While Strobe is ON or
blinking, press and
hold to turn off.
1
3
Replacement Parts and
Accessories
RSM Firmware Upgrades Notice
• Radio checks the RSM firmware version
automatically after power up.
• Older RSM firmware will be upgraded
automatically through the radio.
• RSM firmware upgrade process takes
less than 20 seconds to complete.
• During firmware update, all buttons
except PTT will not function and RSM
power up light may blink.
• The power up light turns off to indicate
that the RSM enters normal operation
mode.
Part Number Description
30009402007 Extreme
Temperature
Replacement Cable
PMLN7633 Replacement Clip
PMLN7653 Replacement Knob
Refer to manual MN007340A01 for other
languages at:
https://learning.motorolasolutions.com
Notes
Notes
Notes
Notes
Notes
Notes
Notes