- SONY Digital Camera Manual
Optional Accessories
XCD-U100 XCD-U100CR XCD-SX90 XCD-SX90CR XCD-V60 XCD-V60CR
Image device
1
/1.8-type progressive scan IT CCD
1
/3-type progressive scan IT CCD
Standard picture size (H x V)
1600 x 1200 (UXGA) 1280 x 960 (SXGA) 640 x 480 (VGA)
Cell size 4.4 x 4.4 µm 3.75 x 3.75 µm 7.4 x 7.4 µm
Resolution depth
Mono 8: 8 bits/pixel Raw 8: 8 bits/pixel Mono 8: 8 bits/pixel Raw 8: 8 bits/pixel Mono 8: 8 bits/pixel Raw 8: 8 bits/pixel
Mono 16: 10 bits/pixel Raw 16: 10 bits/pixel Mono 16: 10 bits/pixel Raw 16: 10 bits/pixel Mono 16: 10 bits/pixel Raw 16: 10 bits/pixel
Lens mount C mount
Digital interface IEEE1394b-2002 x2, bilingual (screw lock possible)
Transfer rate 800 / 400 / 200 / 100 Mb/s
Max. Frame rate
15 fps 30 fps 90 fps
(at full resolution)
Gain control Manual 0 to 24 dB, Manual 0 to 18 dB, Manual 0 to 24 dB, Manual 0 to 18 dB, Manual 0 to 24 dB, Manual 0 to 18 dB,
Auto gain Auto gain Auto gain Auto gain Auto gain Auto gain
Shutter speed 1/100,000 to 16s, Auto shutter
External trigger shutter Trigger start (Mode 0), Trigger start and exposure duration (Mode 1), Programmable trigger (via the IEEE1394 bus),
Trigger inhibit setting, Trigger/Strobe delay setting, Single/Bulk trigger mode
Image memory 16 MB
Memory channel 15 channels for parameter settings
Broadcast delivery Camera setting, Software trigger via IEEE1394 bus
Readout features Partial Scanning, Partial Scanning, LUT, Partial Scanning, Partial Scanning, LUT, Partial Scanning, Partial Scanning, LUT,
Binning, LUT, 3x3 filter Bayer Pattern Binning, LUT, 3x3 filter Bayer Pattern Binning, LUT, 3x3 filter Bayer Pattern
Arrangement, AWB Arrangement, AWB Arrangement, AWB
Power requirements DC 8 to 30 V (via IEEE1394b 9-pin cable or 12-pin camera cable)
Power consumption 3.0 W (Typ.) 2.8 W (Typ.) 2.8 W (Typ.)
Dimensions (W x H x D)
1
3
/4 x 1
5
/16 x 2
3
/8 inches (44 x 33 x 57.5 mm) (not including protruding parts)
Weight 5 oz (140 g)
Operating temperature 23 to 113 ºF (-5 to 45 ºC)
Storage temperature -22 to 140 ºF (-30 to 60 ºC)
Operating humidity 20 to 80% (no condensation)
Storage humidity 20 to 95% (no condensation)
Vibration resistance 10 G (20 to 200 Hz)
Shock resistance 70 G
Supplied accessories Lens mount cap, Operating instructions
Dimensions
Unit: inches (mm)
Pin No.
1 DC IN (Ground)
2 DC IN
3 ISO GND
4 Strobe OUT (Isolated)
5 GPIO OUT 1- (Isolated)
6 GPIO OUT 1+ (Isolated)
7 GPIO IN 1+ (Isolated)
8 GPIO OUT 2- (Isolated)
9 GPIO OUT 2+ (Isolated)
10 GPIO IN 2+ (Isolated)
11 Trigger IN
12 ISO GND
Pin Assignment
12-pin EIAJ connector
Tripod Adapter
VCT-ST70I
Isolated type
Weight: Approx. 0.5 oz (14 g)
Dimensions (W x H x D): 1
5
/8 x
1
/4 x 2
3
/8 inches
(40 x 6 x 59 mm)
Camara Adaptor
DC-700
Cables
CCXC-12P02N CCXC-12P05N
CCXC-12P10N CCXC-12P25N
2 (50)
2
5
/8 (65.5)
12-pin connector
IEEE-1394.b
(screw connectors)
2
3
/8 (57.5) (
11
/32)
17
/32 (13)
(8)
1 (44)
17
/32 (13)
1
1
/16 (26)
1
5
/16 (33)
1
1
/16 (26)
4-M3, depth 4
2-M3, depth 4
Printed in USA (11/07)
© 2007 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Design, features, and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony is a registered trademark of Sony Corporation.
All other trademarks are the properties of their respective owners.
IS-1204 (MK10450V1IW07OCT)
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
www.sony.com/videocameras
Specifications
SONY53715_XCD 11/27/07 4:26 PM Page 4