Specifications

Calling Features
Services and Features
August 08, 2000 68P81095E55-E C-5
User Services
Item Description
Account Codes An Account Codes is dialed after a phone number by the
end user. The code associates that particular call with an
activity or account. For example, a user could dial a
number followed by a 1111 to code a business call.
Account Codes create a new field in the Call Detail
Record and must be coordinated with any downstream
billing processor.
This allows the subscribers to use the phones for business
and personal reasons.
Forwarding Number COS
Validation
The PNP (Private Number Plan) enables an MS to use a
form of abbreviated or extended dialing when making
calls to another MS in the same PNP. This allows an MS
to input forwarded-to-numbers in the same format as
their PNP. The forwarded-to-numbers received by the
HLR are translated to a common format and stored.
Call Waiting Call Waiting transmits an interrupt tone to a MS involved
in a active call to notify the user of another incoming call.
Call Forwarding
(Unconditional)
Call Forwarding - Unconditional, overrides other
versions of call forwarding without regard for other
termination activated for the MS. This allows the
subscriber to have the network divert all incoming calls
to another number.
Call Forwarding can be activated by the service provider
or the subscriber from the MS.
No Answer Transfer (Not
Available)
Call forwarding - Not Available, also called “No Reach”,
will forward calls when the MS does not answer the
page. The call is forwarded to the specified number.
All incoming calls that meet the Call Forwarding
condition are forwarded. The user can still originate calls
No Answer Transfer (no
Reply)
Call Forwarding - No Reply occurs when the MS is
available but the user chooses not to answer the call. All
incoming calls that meet the Call Forwarding condition
are forwarded. The user can still originate calls
Busy Transfer Busy transfer forwards an incoming call to another
directory number when the user is engaged in an active
call. The user call still originate calls.
Call Hold Call Hold allows the user to place an active call on hold
and originate another call, retrieve a currently holding
call or answer a call being held in the Call Waiting mode.
Three Party Calling Three Party Calling provides an MS the ability to have
simultaneous communication with two parties. The user
can create a three way conference or alternate between
the two connections. However, once a conference
connection is established it cannot revert to a split
connection. A precondition is that the MS must remain
in the call. If the MS attempts to drop out of the
conference connection, all connections drop.