User`s guide

Setting Programming Menus
49
6 Auto Answer:Off Turn on or off automatic
answering of incoming phone
calls after 1-4 rings.
9 Vibrate Alert:Off Receive a non-audible alert for
incoming phone and circuit data
calls and messages. See
“VibraCall™” on page 22.
10 Last Call Timer Display the duration of the most
recent phone call.
11 Display Timer:Off Turn on or off automatic display
of the Last Call Timer at the end
of each phone call.
12 Reset Timer Display cumulative airtime of all
phone calls since last reset.
13 Total Timer Display cumulative airtime of all
phone calls.
14 1 Minute Beep:Off Automatically signal each minute
of elapsed phone airtime with an
audible beep.
15 Alert Receipt Delay Voice Mail and Message
Mail Alerts so that users are not
interrupted by the alert tone while
on a call. Users can choose to:
Delay All Alerts; Receive All
Alerts; Receive Message Mail
Alerts only. See “Alert Receipt”
on page 45.
16 Selectable
Backlight Timer
Specify the duration of the
Backlight Timer (10, 20, or 30
seconds).
20 Phone/Prvt List Add phone and private numbers in
one procedure. See “Combined
Phone Number and Private ID
List” on page 31.
Table 6: Programming Menu Options (Continued)
Keypad
Number
Menu Option Function