- Nextel Digital Multi-Service Data-Capable Phone User's Guide

150
nextel.com
Setting TTY Baud Rate
By default, your phone’s TTY baud rate is set to 45.45, the baud rate required
for TTY calls within the U.S. To make calls outside the U.S., set your TTY baud
rate to 50.0.
To change the TTY baud rate:
Setting Alert Timeout
When you receive a Voice Mail message, a Text or Numeric Message, or a Net
Alert message, your phone sounds an alert tone every 30 seconds until you view
or dismiss the message. Alert Timeout sets the amount of time your phone
continues to sound these alert tones.
You can set your phone to sound alert tones for 1 minute, 5 minutes, 15 minutes,
30 minutes, or 1 hour, or to continue to alert you for an unlimited amount of
time, or to never sound an alert tone.
Setting Return to Home
Return to Home sets amount of time your phone takes to return to the idle screen
after a phone call or Private Call:
• After Phone — sets amount of time your phone takes to return to the idle
screen after a phone call.
• After Prvt — sets amount of time your phone takes to return to the idle
screen after a Private Call.
1 From the Initial Setup screen, press R to scroll to TTY Baud.
2 Press C under CHNGE.
3 Press S to scroll to the baud rate for your location.
4 Press C under SELECT.
1 From the Initial Setup screen, press R to scroll to Alert Timeout.
2 Press C under CHNGE.
3 Press S to scroll to the desired alert tone option.
4 Press C under SELECT.