User Guide MOTOROLA i890 www.nextel.com ©2010 Sprint. SPRINT and the NEXTEL name and logo are trademarks of Sprint. Other marks are the property of their respective owners.
Motorola, Inc. Consumer Advocacy Office 600 North US Hwy 45 Libertyville, IL 60048 www.hellomoto.com Note: Do not ship your phone to the above address. If you need to return your phone for repairs, replacement or warranty service, please contact the Motorola Customer Support Center at: 1-800-453-0920 (United States) 1-877-483-2840 (TTY/TDD United States for hearing impaired) Product Support: www.motorola.
DECLARATION OF CONFORMITY FCC Notice to Users Per FCC CFR 47 Part 2 Section 2.1077(a) The following statement applies to all products that have received FCC approval. Applicable products bear the FCC logo, and/or an FCC ID in the format FCC-ID: IHDT56KQ1 on the product label. Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Phone Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nextel Direct Connect . . . . . . . . . . . . . . . . . . . . . Group Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . Nextel Direct Send . . . . . . . . . . . . . . . . . . . . . . . . Talkgroups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Call Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct Talk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. Data Services . . . . . . . . . . . . . . . . . . . . . . . 67 Wireless Data Services . . . . . . . . . . . . . . . . . . . . . 67 Downloading Content . . . . . . . . . . . . . . . . . . . . . 69 6. Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . 93 About Recent Calls . . . . . . . . . . . . . . . . . . . . . . . Viewing Recent Calls . . . . . . . . . . . . . . . . . . . . . . Recent Calls Options . . . . . . . . . . . . . . . . . . . . . . Saving Items From Recent Calls . . . . . . . . .
10. microSD Card . . . . . . . . . . . . . . . . . . . . . 123 S1. Important Safety Information . . . . . . . . 156 Using a microSD Card With Your Phone . . . . microSD Settings . . . . . . . . . . . . . . . . . . . . . . . . . microSD Folders . . . . . . . . . . . . . . . . . . . . . . . . . Connecting Your Phone to Your Computer . . General Precautions . . . . . . . . . . . . . . . . . . . . . . Maintaining Safe Use of and Access to Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction This User Guide introduces you to your wireless service and all the features of your new phone. Throughout this guide, you’ll find tips that highlight special shortcuts and timely reminders to help you make the most of your new phone and service. The Table of Contents and Index will also help you quickly locate specific information. Note: Because of updates in phone software, this printed guide may not be the most current version for your phone. Visit www.nextel.
Use and Care To care for your Motorola phone, keep it away from: ii liquids of any kind dust and dirt Don’t expose your phone to water, rain, extreme humidity, sweat, or other moisture. Don’t expose your phone to dust, dirt, sand, food, or other inappropriate materials. extreme heat or cold cleaning solutions Avoid temperatures below -10°C/14°F or above 45°C/113°F. To clean your phone, use only a dry soft cloth. Don’t use alcohol or other cleaning solutions.
1. Setting Up Service 1. Make sure your SIM card is in place. 䡲 ⽧ Setting Up Your Phone (page 1) ⽧ Activating Your Phone (page 2) ⽧ Setting Up Voicemail (page 2) ⽧ Enabling Security (page 3) ⽧ Account Passwords (page 3) ⽧ Getting Help (page 4) 䡲 seconds to turn the phone on. If your phone is activated, it will turn on, search for service, and enter standby mode. ● If your phone's SIM PIN is set, you may be prompted to enter your SIM PIN code when you turn on your phone.
4. Make your first call. Use your keypad to enter a phone number. 䡲 Press the Talk key (`). 䡲 Note: Your phone’s battery should have enough charge for your phone to turn on and find a signal, set up your voicemail, and make a call. You should fully charge your battery as soon as possible. See “Charging the Battery” on page 13 for details. Activating Your Phone 䢇 䢇 If you purchased your phone at a Nextel Store, it is probably activated and ready to use.
Enabling Security You must enable security the first time you power on your phone or within ten days of first activating your phone. 1. Press and hold @ for two seconds to power on your phone. 2. Press Ok (right softkey). 3. You are prompted to enable security. Press Yes (right softkey). A series of screens followed by the default homepage displays. 4. Press @ to return to standby mode.
Getting Help Operator Services Managing Your Account Operator Services provides assistance when you place collect calls or when you place calls billed to a local telephone calling card or third party. Online: www.nextel.com 䢇 䢇 䢇 䢇 䢇 䢇 䢇 Access your account information. Check your minutes used (depending on your service plan). View and pay your bill. Enroll for online billing and automatic payment. Purchase accessories. Shop for the latest phones. View available service plans and options.
Your Phone 2. Phone Basics Your Phone (page 5) ⽧ Touch Media Keys (page 7) ⽧ Getting Started With Your Phone (page 9) ⽧ Navigating Through Menus and Options (page 16) ⽧ Displaying Your Numbers (page 17) ⽧ Entering Text (page 17) ⽧ Accessories (page 21) Phone Basics ⽧ Open View 10. Navigation Key 1. Left Softkey 2. Menu Key 3. OK Key 9. Right Softkey 8. Web Key 7. End/Power Key 4. Talk Key 5. Back Key 6. Space Key 2.
3. OK Key (r) selects the highlighted choice when Closed View navigating through a menu. 11. Speaker Button 4. Talk Key (`) allows you to place or receive calls, 19. Smart Button answer Call Waiting, or use Three-Way Calling. 18. Phone Release Button 12. Volume Button 13. Direct Connect (DC) Button 14. Touch Media Keys 17. External Button Lock 16. Touch Exit Key 5. Back Key (*) deletes characters in text entry mode. When using the Web, it allows you to return to the previous page. 6.
volume in standby mode, the voice or speaker volume during a call, and the speaker volume while using the music player or other applications. 13. Direct Connect (DC) Button allows you to use Nextel Direct Connect®. (See page 29.) 14. Touch Media Keys are multipurpose keys that allow you to control applications and phone functions while the phone is closed. 15. Micro USB Connector allows you to connect your charger or other accessories to your phone. 16.
Using the Touch Media Keys 1. Press the Smart Button with the phone closed to activate the touch media keys and the external display menu. 2. Press the left or right touch media key to scroll through the menu. 3. Press the center touch media key (@) to select the highlighted item (for example, My Music to launch the music player). 4. Touch the keys as indicated to select a function. Camera/Camcorder actions Note: All Camera, Camcorder, My Images, and My Videos menus use a horizontal screen.
Your SIM Card Tip: To exit a menu, press the Smart Button. Getting Started With Your Phone To start using your i890 phone: 䢇 Make sure your SIM card is in place. 䢇 Charge the battery. 䢇 Turn on your phone. After you’ve completed these items, you are ready to begin using your new phone. Locating the SIM Card Your SIM (Subscriber Identity Module) card is a small card inserted into the SIM card holder within your phone below the battery.
Removing and Inserting the SIM Card Important: To avoid losing information stored in your SIM card, do not remove it from your phone unless absolutely necessary. To remove your SIM card: 1. With your phone powered off, use your thumbs to slide the battery cover up until it is released from the phone, and then remove the battery cover from the back of the phone. 2. Remove the battery, and then use your thumbs to carefully slide the SIM card out from under the edge. 10 2.
WARNING: Use only Nextel-approved or Motorola-approved batteries and chargers with your phone. The failure to use a Nextel-approved or Motorolaapproved battery and charger may increase the risk that your phone will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage. Note: Long backlight settings, searching for service, vibrate mode, browser use, and other variables may reduce the battery’s talk and standby times.
Installing the Battery 2. Remove the battery door. 1. Use your thumbs to slide the battery door up until it is released from the phone. 3. Insert the battery into the opening, making sure the connectors align. Gently press down to secure the battery. 12 2.
the base of the phone while pressing gently, until you hear a click. Using the Phone Charger 䊳 Plug the flat end of the charger into the phone’s micro USB connector and the other end into an electrical outlet. Phone Basics 4. Replace the battery door, sliding it down toward Removing the Battery 1. Make sure the power is off so that you don’t lose any stored numbers or messages. 2. Remove the battery cover and position your fingernail on the top end of the battery to remove it.
enter identifying information to use it or to access specific features. Note: If your phone's SIM PIN is set, you will be prompted to enter your SIM PIN code when you turn on your phone. Enter the four-digit number and press Ok (left softkey). Press Yes (left softkey) to allow phone transmissions as prompted. Turning Your Phone Off 䊳 Press and hold @ for two seconds until you see the powering down animation on the display screen.
Bluetooth In Use — Your phone is using Bluetooth. If this icon is blinking, your phone is in discoverable mode. If this icon is static, a Bluetooth connection is active. QRS TUV WX Text Input — You are using one of the phone’s text entry methods. See “Selecting a Text Input Mode” on page 17. %' Active Phone Line — 1 indicates phone line 1 is ready to make calls; 2 indicates phone line 2 is ready to make calls.
Navigating Through Menus and Options 䊳 Press / to access the main menu, and then use the navigation key to scroll through menu items. 3. Select Inbox by highlighting it and pressing r. (If you have any MMS messages, they are displayed.) Note: For the purposes of this guide, the above steps condense into “Press / > Messages > Inbox.” To navigate through a list-type menu, simply press your navigation key up or down.
Help Your phone contains an in-device help program to help you understand complicated or seldom used features. When you access a feature, Help sometimes appears as a menu item or softkey. Select Help and read the text for a quick overview of the feature. For more information, refer to this guide. Displaying Your Numbers My Info lets you view your phone number, Direct Connect number, and other phone information. 䊳 Press / > Tools > My Info.
Tip: When entering text, press and hold the # to change letter capitalization (ABC > Abc > abc). Entering Text Using Word Text Input Word Text Input (T9) reduces the number of keystrokes needed to enter a word by predicting complete words as you type. While you enter letters, Word mode matches your keystrokes to words in its database and displays the most commonly used matching word. You can add your own words to this database. 1. Select the Word text input mode. 2.
1. Select the Alpha mode. (See “Selecting a Text Input Characters scroll in the following order: Key Mode” on page 17.) 2. Press the corresponding keys repeatedly until the correct letter appears. (For example, to enter the word “Bill,” press 2 twice, 4 three times, 5 three times, and 5 three times again. (If you make a mistake, press Delete [left softkey] to erase a single character. Press and hold Delete [left softkey] to erase an entire entry.
corresponding to the symbol on the onscreen chart. To enter numbers: 䊳 Select the Numeric mode and press the appropriate key. (See “Selecting a Text Input Mode” on page 17.) To enter Quick Notes: 1. From a text entry screen, press QNotes (left softkey). Spaces Press # to enter a space. Capitalization When you press and hold the # key, it acts as a three-way toggle.
Punctuation Press 1 or 0 to insert punctuation. Continue to press the key to view the list of symbols available through that key. Pause to select a symbol. Note: Additional punctuation symbols are available in Symbols mode. Accessories Your i890 phone comes with the following accessories: 䢇 A Li-Ion battery and charger. 䢇 A128K SIM card. Various accessories are available for use with your i890 phone, including cases, vehicle power chargers, data cables, hands-free accessories, and more.
䢇 3. Making and Answering Calls ⽧ Types of Calls (page 22) ⽧ Phone Calls (page 23) ⽧ Nextel Direct Connect (page 29) ⽧ Group Connect (page 31) ⽧ Nextel Direct Send (page 35) ⽧ Talkgroups (page 40) ⽧ Call Alerts (page 42) ⽧ Direct Talk (page 44) 䢇 䢇 䢇 䢇 Types of Calls With the Nextel National Network, Nextel Direct Connect, and your i890 phone, you have the following traditional wireless phone and Nextel Direct Connect services available to you: 22 3.
more phones equipped with this capability (page 44). Answering Calls 1. Make sure your phone is on. Phone Calls Note: When your phone is off, calls go directly to voicemail. 2. Press ` to answer an incoming call. Placing a traditional wireless phone call from your i890 phone is as easy as making a call from any landline phone. 1. Make sure your phone is on. 2. Enter a phone number from standby mode and press `. (If you make a mistake while dialing, press Delete [right softkey] to erase the numbers.
Ending a Call 䊳 To end a call, press @ or close the phone. Missed Phone Calls Missed phone calls are forwarded to voicemail. When you do not answer an incoming call, you will see a Missed Call notification. To display a Missed Call entry from the notification screen: 䊳 Press View (left softkey). (To dial the phone number, press ` after displaying the entry.) To display a Missed Call entry from standby mode: 1. Press ` or / > Recent Calls. 2. Highlight an entry and press r. 24 3.
when placing an emergency call. Some designated emergency call takers, known as Public Safety Answering Points (PSAPs) may not be equipped to receive GPS location information from your phone. Emergency calls cannot be placed while the keypad is locked. If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone.
Speakerphone 䊳 Press ) or Speaker (right softkey) during a call to route the phone’s audio through the speaker or the earpiece. To view Call Details and Call Info: 1. Select a recent call. 2. Press r to view the Call Details. 3. Press r again to view the Call Info. WARNING: Because of higher volume levels, do not place the phone near your ear during speakerphone use. Mute 䊳 1. Enter a phone number and press /. Press Mute (left softkey) during a call to mute the microphone.
To find Contacts entries, you can either scroll through the list using your navigation key or you can search Contacts entries by name. 1. Press / > Contacts. 2. Press Search (left softkey). 3. Enter the first few letters of a Contact's name and press r. (The first contact entry that matches the entered text will be highlighted.) 4. To display the Contacts entry, press r. To dial the entry's default phone number, press `.
Making a Call From Contacts 1. Press / > Contacts. 2. Highlight an entry and press ` to dial the default phone number. 2. Say a voice name. Your phone plays the name back to you. 3. The call is placed automatically. Tip: To stop a phone call from being completed, press the Smart Button ((). – or – To dial another number from the entry, highlight the name, press the navigation key right or left until the correct number type appears, and then press `. Making a Call From Recent Calls 1.
䢇 2. Press ` to dial the number. ® To use Turbo Dial for speed dial locations 1–9: 䊳 Press and hold the appropriate key for approximately two seconds. The display confirms that the number has been dialed when it shows “Calling...”. Redialing the Last Number 䊳 Press and hold `. Nextel Direct Connect Nextel offers the following Nextel Direct Connect® services: ® 䢇 Direct Connect allows instant two-way radio communication with another Direct Connect user anywhere on the Nextel National Network (U.S.).
A Direct Connect call ends automatically after there is no activity on the call for several seconds. Dialing Direct Connect Numbers Every Direct Connect number has three parts: 䢇 An area ID. 䢇 A network ID. 䢇 A member ID. An asterisk separates each part (for example: 999*999*9999). When you enter a number containing all three parts, you must separate them with asterisks. Note: The number of digits in each part of a Direct Connect number may vary.
If you have created a voice name in Contacts, say the voice name into your phone to enter the number. 1. With the phone closed, press and hold the speaker button (s) until a prompt appears telling you to say the name. 2. Say the name. Your phone plays the name back to you. 3. Press and hold the DC button. Answering Direct Connect Calls When you receive a Direct Connect call, your phone emits a tone or vibrates. You then hear the voice of your caller. 1. Wait for the caller to finish speaking. 2.
. Tip: You can also start a Group Connect call by entering or selecting a Direct Connect number. See “Starting a Group Connect Call With a Direct Connect Number” on page 33. Answering Group Connect Calls 䊳 Proceed as if answering a Direct Connect call from one user. Only one person at a time may speak on a Group Connect call. Creating Groups in Contacts 1. Press / > Contacts. 2. Select [New Group]. 3. To assign a name to the Group, enter the name.
softkey) to save the group. To add Group members manually from the keypad: 1. While creating a Group, select [Add Number]. 2. Enter the Direct Connect number. 3. Press r and then press Save (left softkey). Starting a Group Connect Call With a Direct Connect Number 1. Press / > Push To Talk > Direct Connect, select 3. Add more Group members. See “Adding Group Members” on page 32. 4. To save the Group, press / > Store Group. – or – To call without saving, press Done (left softkey). 5.
3. Press Yes (left softkey). Storing Groups To store a group to Contacts from the Recent Calls list: 1. From the Recent Calls list, select a Group and press Save (left softkey). 2. Add more information to the entry (optional). 3. Press Save (left softkey). To store a group to Contacts from an active call: 1. During an active Group Connect call, press / > Store Group. 2. Add more information to the entry (optional). Note: You cannot record a voice name during an active call. 3.
During a Group Connect call, you can view details about the other group members, such as their name or Direct Connect number, and their status on the call. To view Group Connect call details: 䊳 Press Details (left softkey). In the Details view, these icons appear next to member names or Direct Connect numbers: F The member of the Group who is speaking. E A member of the Group who is active on the Group Connect call, but not speaking. D A member of the Group who has exited the call.
To send a picture during a call: 1. While in a Direct Connect call, press Picture (right softkey). A list of pictures that can be included in a Direct Connect call appears. 2. Select a picture and press the DC button to send it. 3. Wait while the picture is transmitted. The Direct Connect call is temporarily interrupted while a picture is transmitted. 4. When prompted, press the DC button to resume the Direct Connect call.
When you receive a picture, it appears every time you are in a Direct Connect call with the person who sent it unless you delete the picture from the Media Center. This occurs for the last 20 people who sent you pictures. To accept a picture: 1. When you see the message asking you to accept the picture, press Yes (left softkey). (To decline the picture press No [right softkey].) 2. Wait while the picture is transmitted.
Sending My Info You can control what portion of the information in My Info is sent and whether it is sent automatically in every Direct Connect call or only when you choose to send it. Tip: When you send My Info, certain information, such as your email address or fax number, cannot be included. To send complete contact information, create an entry for yourself in Contacts and send it. The information your phone sends always includes My Name and Direct Connect.
to send the information. 2. Press / > Send Via... > Direct Send. Note: If the Contacts entry you scrolled to is a Group, you may be prompted to allow yourself to be a part of the group being sent. Press Yes (left softkey) to become part of the group. Sending Contact Information You can send contact information by selecting a Contacts entry. Contacts entries that contain only addresses cannot be sent. When Contacts entries are received, they do not include ring tones or pictures. 3.
Sending Groups Using Direct Send You can send a Group using Nextel Direct Send so that the person who receives the Group can use the list. To send a Group from the Recent Calls list: 1. From Recent Calls, highlight a Group and press / > Send Group. 2. To include yourself in the Group, press Yes (left softkey). To exclude yourself, press No (right softkey). Note: If you choose to include yourself and the Group already contains 20 members, you will be prompted that the list is full.
Group Talkgroup Group Icons t r Geography Nationwide Limited to local market and network (fleet) Maximum Group Size 21 (including originator) 100 Setup Dynamically, via your phone Predefined, via Nextel administrator using Talkgroup Management Voice Activated Dialing Yes No Joining a Talkgroup To participate in a Talkgroup, the account administrator must first add you to the membership and then you must “join” the Talkgroup. 1. Press Contacts (right softkey) and highlight a Talkgroup. 2.
Select the Talkgroup from Contacts or the Recent Calls list. 2. Press the DC button and continue as if making a 2. When “Ready to Alert” appears, press the DC button to send the Call Alert. Note: You can send a Call Alert from Recent Calls or Contacts. Select a Direct Connect number and continue as explained above. Direct Connect call. Receiving Talkgroup Calls 䊳 Answer it as you would a regular Direct Connect call. Only one person at a time may speak on a Talkgroup call.
䊳 Press Clear (right softkey). To store a Call Alert in the Call Alert queue: 䊳 Press Queue (left softkey). Note: The Recent Calls list also stores Call Alerts you have received. They appear as Direct Connect calls. Call Alerts remain in your Recent Calls list until you delete them or until they reach the end of the list. Using the Call Alert Queue When you queue a Call Alert, it remains in the Call Alert queue until you make a Direct Connect call to the sender or delete it. Viewing Call Alerts 1.
2. Press r or press Yes (left softkey) to confirm. To delete all Call Alerts from the queue: 1. From the Call Alert queue, press / > Delete All. 2. Press r or press Yes (left softkey) to confirm. Call Status and Completion After a failed incoming or outgoing Direct Connect call or Call Alert, you can send a message to the caller or intended recipient. To set up a message for incoming or outgoing calls: 1. Press / > Settings > Advanced > Call Completion > Incoming Call or Outgoing Call. 2.
the participants. In these calls, others using the same channel cannot listen in. To return to network mode from Direct Talk: 1. Press / > Push To Talk > DT Options. When using Direct Talk mode, the two phones should be a minimum of six feet apart to maximize performance and improve transmission range. You can only make Direct Talk calls to users located within your range. This varies according to terrain, man-made structures, and atmospheric conditions.
Making and Receiving Code Calls in Direct Talk Mode To set your phone to Private Only: 1. In Direct Talk mode, press Edit (left softkey) > Code > Pvt Only. In Direct Talk mode, press and hold the DC button. Your phone displays Transmitting, along with the channel and code selected. 2. Press Back (right softkey) to return to the Direct Talk The tone emitted from your phone when making a Direct Talk call sounds different from the tone heard on Direct Connect calls conducted on the network.
Receiving All Calls on a Channel You can set your phone to receive all Direct Talk transmissions that are within range and set to the same channel. Do this by selecting Receive All, instead of a code. Making Emergency Calls While in Direct Talk Mode If you attempt to make an emergency 911 call while in Direct Talk mode, your phone automatically exits Direct Talk mode and attempts to find a network signal.
4. Service Features: The Basics ⽧ Message Center (page 48) ⽧ Receiving Messages (page 49) ⽧ Voicemail (page 50) ⽧ Multimedia Messages (MMS) (page 51) ⽧ Text Messaging (SMS) (page 60) ⽧ Caller ID Blocking (page 60) ⽧ Call Waiting (page 61) ⽧ Making a Second Call (page 62) ⽧ Making a Three-Way Call (page 62) ⽧ Call Forwarding (page 62) ⽧ Making International Calls (page 65) ⽧ Special Dialing Codes (page 65) ⽧ Nextel Phone Services (page 66) 48 4.
䢇 䢇 䢇 䢇 Drafts — access MMS messages you have created and saved but not sent. Outbox — store MMS messages that were not sent. Sent Items —access MMS messages you have sent. Net Alert — access alerts that you receive from Nextel. Receiving Messages 䊳 To dismiss the message notification, press Later (right softkey). If you dismiss the notification, the message is not deleted. You can access it through the message center.
Voicemail Tip: To receive voicemail messages, you must first set up your voicemail box. If you are bringing your phone number from another carrier, we suggest you set up your voicemail box after the number you brought to Nextel is active on your Nextel phone and your temporary phone number is deactivated. If you set up your voicemail box prior to this, all messages and all settings (including your greeting and password) will be lost when the number you have brought to Nextel becomes active. your password.
Multimedia Messaging Service (MMS) lets you send and receive messages that may include text, pictures, and audio recordings. Your MMS address is PTN@messaging.nextel.com. Your PTN is your ten-digit Nextel Personal Telephone Number. Note: Most common phone-to-phone text messages are sent and received as MMS messages on your i890 phone. Text messages sent from other phones or mobile devices to your phone number arrive as MMS messages. Accessing MMS Messages 1. Press / > Messages. 2.
Entering Text In message fields that require you to enter text, you can begin entering the text from the keypad when the field is highlighted. While entering text, press / to choose a text input mode from the context-sensitive menu. (See “Entering Text” on page 17.) Message Size You can create and send messages of up to 100 KB, including attachments, for MMS. The size of the message appears at the top of the display as you are creating the message.
䡲 Select Message and then use any of the following options to enter your message. Note: If you have created a signature, the signature automatically appears in this field. Text you enter appears before your signature. (See “Adding a Customized Signature” on page 78.) ● ● ● Enter text from the keypad. Use a Quick Note. See “Quick Notes” on page 55. Insert a picture, a video, or an audio file. See page 55. When you are finished, press r. 4.
Replying to a Message You can reply to a read message while you are viewing it or while it is highlighted in the Message Center. You cannot reply to unread messages. When you reply to a message, some of the fields in your reply are filled in automatically. These may include To, Message (the first 40 characters of the received message), Subject, and Cc. To reply to a message: 1. Display or highlight a read message and press Reply (left softkey).
stored, display the phone number to which to send the message. 3. Press Create (left softkey) or press / > Create. 4. Create and send the message. To begin a message from standby mode: 䊳 Enter a phone number and press / > Create Message. To begin a message from the Media Center: 1. From the Media Center, highlight or select a picture or audio file. 2. Press Send (left softkey). 3. Create and send the message. The selected file is automatically included as an attachment.
Note: You can also select Capture Picture or Capture Video to take a new picture or video to send. Inserting Audio Files or Voice Records You can insert audio files from the Media Center or voice records from your voice records list. Preloaded audio files or files with the forward locked icon (u) cannot be included in a message. 1. Highlight the Message field and press / > Insert > Insert Audio. (You will see a list of available audio files.
Sent Items Receiving a Message The Sent Items folder holds all messages that have been sent. When you receive an MMS message, a message notification appears on the display. Forwarding Sent Items To view the message: 3. Address, edit, and send your message. 䊳 To dismiss the message notification: 䊳 Outbox Messages you tried to send are stored in the Outbox. Press r or press Read (left softkey). The message is downloaded from the message server. Press Later (right softkey).
Navigating a Message Actions for Received Messages As you scroll through a message, numbers, email addresses, and Web addresses are highlighted. Deleting Pictures and audio recordings are also highlighted. Embedded Objects and Attachments Messages may contain pictures or audio files as part of the body of the message or as attachments. If a message contains pictures or audio files in the body of the message, highlight each picture or audio file to view or play it.
When you lock a message, it cannot be deleted until you unlock it. 䊳 Highlight or view a message and press / > Lock Message or Unlock Message. To make a Talkgroup call to a Talkgroup ID in a message: 1. View the message. 2. Highlight a Talkgroup ID and then press / > Talkgroup. 3. Press the DC button.
Going to a Website Note: Most traditional phone-to-phone text messages arrive as MMS messages on your i890 phone. Your phone can send and receive MMS messages. If a message contains one or more Web addresses, you can go to the website. Your phone can receive SMS text messages, but it cannot send them. 1. View the message. 2. Highlight a Web address and then press / > Go To Website. Note: The entire Web address must appear in the message. Otherwise, you cannot go to the website.
Your Nextel phone number cannot be blocked from calls made to 911, 800, 855, 866, 877, 888, or other toll-free phone numbers. To accept the second call and end the active call: 1. Press @. Your phone rings with the second call. 2. Answer the second call. You can request that Nextel Customer Service permanently block delivery of your phone number on every call you make. In this case, you may need to display your number for certain calls.
Making a Second Call 1. Place or receive a phone call. 2. While the call is active, press / > 2nd Call. (The first call is placed on hold.) 3. Enter a second phone number and press ` to place the call. Note: For quick ways to enter the number, press /. To end the second call and make the on-hold call active: 䊳 Press @. To make the on-hold call active and put the active call on hold: 䊳 (The first call is placed on hold.) 2. Enter a second phone number and press `. 3. Press Join (right softkey).
Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display: & Phone line 1 is active; calls to phone line 1 are being forwarded. ) Phone line 1 is active; calls to phone line 2 are being forwarded. ; Phone line 1 is active; calls to phone lines 1 and 2 are being forwarded. ( Phone line 2 is active; calls to phone line 1 are being forwarded. * Phone line 2 is active; calls to phone line 2 are being forwarded.
All your calls are now sent to your phone. Forwarding Missed Calls Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voicemail. You can specify a forwarding number for each type of missed call: 䢇 If Busy — Your phone is on a call or transferring data. 䢇 If No Answer — You do not answer on the first four rings. 䢇 If Unreachable — Your phone is out of coverage or powered off. Note: You are charged a higher rate for calls you have forwarded.
Making International Calls Your service default is “International Calls Restricted.” Contact Nextel Customer Service to obtain international dialing access. Calls placed between the United States and Canada do not require an international access code. Special Dialing Codes number. Relay service works through a Communications Assistant who reads messages typed into a TDD/TTY device by a speech or hearing impaired individual to you.
䡲 HCO (Hearing Carry-Over) – Type text on your TTY and listen to voice replies on your phone. 䢇 Choose a Second Line Service plan that fits your needs. Nextel Phone Services In order to activate Second Line Service, contact your Nextel Sales Representative or call Nextel Customer Service. Contact Nextel Customer Service to obtain these services or for additional information.
⽧ Wireless Data Services (page 67) ⽧ Downloading Content (page 69) Wireless Data Services With Web access on your phone, you can browse your favorite websites, making it easier than ever to stay informed while on the go. Follow sports scores, breaking news, and weather, and shop on your phone anywhere on the Nextel National Network. Using the Web Browser Navigating the Web from your phone is easy once you get the hang of it. Opening the Browser 䊳 Press L (the Web key).
Going to a Specific Website To go to a particular website by entering a Web address (URL): 1. From the home page, select Go to URL. Note: Bookmarking a page does not store the page contents, just its address. Some pages cannot be bookmarked. Whether a particular Web page may be marked is controlled by its creator. 2. Press Edit (left softkey). 3. Use your keypad to enter the Web address and press Done (left softkey). 4. Press Options (right softkey) > accept to go to the website.
If the Web browser seems to be malfunctioning or stops responding, you can usually fix the problem by simply restarting the browser. 1. Press and hold / to open the browser menu. 2. Select More... > Restart Browser. Downloading Content Your phone arrives with Java applications and games loaded and ready to install. You can download and install more Java applications. For more information on Java Security, see “Setting Privacy for Each Java Application” on page 89.
Sound Settings 6. Settings Ring Tones Your phone provides a variety of ringer options that allow you to customize your ring and volume settings. These options allow you to identify incoming calls and messages by the ring. ⽧ Sound Settings (page 70) ⽧ Display Settings (page 74) ⽧ Messaging Settings (page 76) ⽧ Airplane Mode (page 78) ⽧ Setting One Touch Direct Connect (page 79) 1. Press / > Multimedia > Ring Tones. ⽧ Headset Options (page 79) 2. Scroll through the list of ring tones.
Assigning a Ring Tone to a Contact Downloading More Ring Tones You can also assign a ringer to a specific contact entry so you know who's calling without looking at the phone. To use other ring tones, you can download them into your phone for a fee. 2. Scroll through the list of ring tones and select one. A sample ringer will sound as you highlight each option 䊳 Press / > Multimedia > Ring Tones > Buy Ring Tones. Note: Ring tones may be downloaded only once.
In most cases, when you delete a ring tone that you purchased from your phone, you will have to purchase it again. Press / > Multimedia > Ring Tones > Vibrate All. Set this option to On or Locked. Tip: Setting this option to Locked requires you to press and hold the volume control up to turn Vibrate All off. The Locked option helps prevent you from accidentally turning Vibrate All off. To delete a ring tone: 1. Press / > Multimedia > Ring Tones. 2. Make sure Vibrate All is set to Off. 3.
/ The phone vibrates then rings for all calls. Silence All , The ring volume is set to zero for all calls. The Silence All option allows you to mute all sounds without turning your phone off. To set your phone to ring and vibrate when you receive phone calls or Call Alerts: To activate Silence All: 䊳 1. Press / > Multimedia > Ring Tones. 2. Make sure Vibrate All is set to Off. 3. Scroll through the list and select a ring tone. 4. Press / > Assign w/Vibe. 5.
Adjusting the Phone’s Volume Settings Display Settings Adjust your phone’s volume settings to suit your needs and your environment. Changing the Backlight Time Length 1. Press / > Settings > Volume. 2. Select Ringers/Alerts, Speaker, Earpiece, Multimedia or Keypad. 3. Choose a volume level and press r. Tip: You can adjust the ringer volume in standby mode (or the earpiece volume during a call) by using the volume key on the left side of your phone.
it. Press Back (right softkey) to return to the available images. 3. Press r to assign an image. Setting Wallpaper to Change Automatically When you set your wallpaper to change automatically, your phone uses each of the pictures in Media Center as wallpaper, cycling through them at a pace you choose. 1. Press / > Settings > Display/Info > Wallpaper > Internal or External > Auto Cycle. 2. Select how frequently the wallpaper will change then press r.
Setting Message Notification Changing the Text Size Adjust the font when entering text (for example, when using the notepad or when adding a Contacts entry). 1. Press / > Settings > Display/Info > Text Size. 2. Highlight an option and press r. Messaging Settings When you receive a message, your phone notifies you by displaying an icon on your display screen. You can also choose to be notified with a sound while making a phone call. 1. Press / > Settings > Phone Calls > Notifications. 2.
䢇 䢇 Report Default — allows you to set the default for the Delivery Report Option to on or off. Memory Size — displays a report on phone memory. MMS Setup — allows you to set up the following: 䡲 Friendly Name — lets you enter the name displayed in the From field on messages you send. 䡲 Download Options — lets you control message downloads. Automatic downloads messages automatically. Manual requires you to reply to a prompt before messages download to your phone.
Note: You can edit or delete all Quick Notes. You can only edit or delete Reply phrases that you created. Setting the Cleanup Option 1. Press / > Messages > / > Setup > Signature. If you do not wish to attach a signature to your outgoing messages, press Delete (left softkey). 2. Enter a signature and press r. (See “Entering Text” on page 17.) The cleanup option controls how long messages remain in the Inbox and Sent Items before they are deleted.
䊳 Set this option to On and then press Yes (left softkey). Note: When Transmitters is set to Off, your phone’s Bluetooth capability is disabled, and all active Bluetooth connections are dropped. Headset Options To set your phone to send incoming sound to a headset only, or to a headset and a speaker at the same time: 1. Press / > Settings > Advanced > Headset/Spkr. 2. Select HdsetOnly to send incoming sound to the Setting One Touch Direct Connect headset only.
2. Highlight a profile and press View (left softkey). Tip: The profile that is currently in effect on your phone has a checkmark next to it. 3. Scroll to view settings. Switching Profiles 1. Press / > Tools > Profiles. 2. Highlight a profile and press r. The profile you selected is now in effect.
To store a temporary profile as a new profile: 1. Press / > Tools > Profiles. 2. Highlight the temporary profile and press / > Store As New. 3. Enter a name and press r. To overwrite the profile the temporary profile is based on: r. If you do not choose a profile to copy from, the new profile is based on a default profile. 4. Press Create (left softkey). 5. Scroll through the list of options and set their values. 6. When you are finished, press Done (right softkey).
To delete all profiles: 1. Press /> Tools > Profiles. 2. Press / and then select Delete All. 3. Press r or press Yes (left softkey) to confirm. Setting Call Filtering The call filtering setting in each profile lets you control which calls, Call Alerts, and message notifications your phone notifies you of, and which it ignores. 1. While setting options for a profile, select Call Filter. 2. Select a filtering option 䡲 Phone – sets filtering options for phone calls. ● Off – notifies you of all calls.
5. To record a voice name for the shortcut, select Voice (optional). Follow the prompts to say and repeat the name. Speak clearly into the microphone. Shortcuts Your phone offers you the option of assigning shortcuts to favorite or often-used functions. Pressing the / key in standby mode followed by the assigned shortcut key will launch your personally designated shortcuts. 6. Press Done (left softkey). 7.
Editing a Shortcut Deleting Shortcuts To change the order of shortcuts: To delete a shortcut: 1. Press / > Settings > Personalize > Shortcuts. 1. Press / > Settings > Personalize > Shortcuts. 2. With any shortcut highlighted, press / > Reorder. 2. Highlight a shortcut and press / > Delete. 3. Highlight the shortcut you are moving and press Grab (left softkey). 4. Scroll to a new location and press Insert (left softkey). 5. Repeat step 2 through step 4 for all the items you are moving. 6.
Personalize Carousel is an iconic list of application shortcuts displayed horizontally at the bottom of the display in standby mode that allows you to access a total of nine applications. In addition to Shortcuts, the Personalize menu gives you other options to access menu items easily. To scroll through the list of icons, press the navigation key right or left to highlight an icon, and press r to select the icon. Configuring Auto Hide Settings 䊳 Press / > Settings > Personalize > Carousel > Auto Hide.
Select Off to require you to press ` to answer all incoming calls. 䡲 Auto Ans to set your phone to automatically answer an incoming call after a specified number of rings when connected to a headset or hands-free car kit. ● Off to disable Auto-Answer. ● 1 Ring, 2 Rings, 3 Rings or 4 Rings to answer calls automatically when the phone is connected to a hands-free car kit or a headset (sold separately). In Auto-Answer mode, your phone will answer calls even if you are not present.
Reset Settings. 2. Enter your phone’s six-digit security code and press Ok (left softkey). (A disclaimer is displayed.) Note: Your security code is a six-digit number used for resetting your phone. Please contact Nextel Customer Service if you do not know your security code. 3. Read the prompt and press Yes (left softkey) to complete the reset. (Press No [right softkey] to cancel.
䡲 By Permission — When an application attempts to view the location of your phone, you will be prompted to give permission. However, location information may still be available to the phone’s owner, fleet manager, or account administrator. Setting the GPS PIN Security Feature To prevent your GPS privacy settings from being altered without your knowledge, your GPS privacy option can be protected by a PIN.
3. Press / > Permissions. 4. Select privacy options for this application (you may set them for each of the menus available under Permissions): 䡲 Always — The application always has permission to access the phone’s location without notification. 䡲 Ask — When the application requests access to the phone’s location, you are prompted to grant or deny permission (see “Granting or Denying Permission” on page 89). 䡲 Never — Requests for location are denied without notification.
䡲 Tkgrp Area — lets you define your Talkgroup area. 䡲 One Touch DC — sets One Touch Direct Connect. Alert Type — controls how your phone notifies you when you receive Direct Connect calls, Group Connect calls and Talkgroup calls. 䡲 On/Off Settings — sets your phone’s ability to send and receive pictures in Direct Connect calls. See “Starting a Call by Sending a Picture” on page 36.
1. Press and hold @ to turn on your phone. 2. When the SIM PIN screen appears, enter your SIM PIN and press Ok (left softkey). Important: If you enter your PIN incorrectly three times, your SIM card is blocked. See “Unblocking the PIN” on page 91. Changing the PIN Code (PUK). Follow their instructions for unblocking your SIM PIN. Important: If you unsuccessfully enter the PUK code ten times, your SIM card is permanently blocked and must be replaced.
Unlocking Your Phone 䊳 At the “Enter Unlock Code” prompt, enter your unlock code and press Ok (left softkey). Changing the Lock Code 1. Press / > Settings > Security > Change Passwords. 2. Select Unlock Code then enter your current unlock code and press Ok (left softkey). 3. Enter and reenter your new lock code, pressing Ok (left softkey) after each. Calling in Lock Mode You can place calls to 911 when in lock mode. 䊳 92 To call an emergency number, dial 911 and press `. 6.
⽧ About Recent Calls (page 93) ⽧ Viewing Recent Calls (page 95) ⽧ Recent Calls Options (page 95) ⽧ Saving Items From Recent Calls (page 96) ⽧ Deleting Items From Recent Calls (page 96) ⽧ Prepending a Number From Recent Calls (page 97) About Recent Calls The Recent Calls list displays the last 20 numbers (or Contacts entries) for calls you placed, accepted, or missed, and for Call Alerts you have received. It also displays My Info and contact information sent to you from other phones.
Call Alerts you have received appear as Direct Connect calls. Like all items in the Recent Calls list, they remain listed until you delete them or until they reach the end of the list. For phone calls, an additional icon appears giving information about the call. $ A call you made. 1 A call you received. # A missed call. Missed calls appear on the Recent Calls list only if you have Caller ID.
When you select contact information to view its details, you see the name or Direct Connect number of the person who sent the information and all the information in the item. If you receive contact information with the same name from the same phone more than once, only the most recently sent version appears in the Recent Calls list. Viewing Recent Calls To view the Recent Calls list: 1. Press ` or / > Recent Calls. 2. Scroll through the list.
Tip: Press Create (left softkey) to begin a message to the highlighted entry. You can also view the next Recent Calls entry by pressing the navigation key right or view the previous entry by pressing the navigation key left. Saving Items From Recent Calls 1. From Recent Calls, highlight or select an item. 2. Press Save (left softkey). – or – If Save is not one of your options, press / and then select Save or Update Contacts.
Prepending a Number From Recent Calls If you need to make a call from the Recent Calls List and you are outside your local area code, you can add the appropriate prefix by prepending the number. 1. Highlight or select a Recent Calls entry and press / > Add Prepend. Recent Calls 2. Enter the prefix and press ` to call the number. 7.
About Contacts 8. Contacts ⽧ About Contacts (page 98) ⽧ Creating Contacts Entries (page 99) ⽧ Viewing Contacts (page 101) ⽧ Adding a Number to an Entry (page 102) ⽧ Editing Entries (page 102) ⽧ Deleting Entries (page 103) ⽧ Assigning Speed Dial Numbers (page 103) ⽧ Selecting a Ringer Type for an Entry (page 104) ⽧ Assigning a Picture to an Entry (page 104) 98 8. Contacts Contacts stores up to 1200 numbers or addresses. Each Contacts entry can store several numbers or addresses.
Creating Contacts Entries Each number or address stored must be assigned a Contacts type: A Mobile phone number 0 DC Direct Connect number i Work1 phone number j Work2 phone number k Home phone number l Email email address n Fax phone number o Pager phone number r Talkgroup Talkgroup number t Group Group q IP IP address p Other phone number Each Contacts entry can store up to 10 numbers or addresses, and an entry’s name can contain 20 characters.
To create a Contacts entry: 1. Press / > Contacts > [New Contact]. 2. To assign a name to the entry: 䡲 Select Name. Enter the name and press r. 3. To assign a ring tone or picture to the name (optional): Select [Ring Tone/Pict], select a ring tone or picture, and then press Back (right softkey). 䡲 4. To assign a Contacts type to the number or address being stored: Highlight the Contacts type field.
Enter the additional information for the entry using steps 2–9. You must assign a name to the entry, if you have not already. 11. Press Save (left softkey). Creating Pauses and Waits When storing a number, you can program your phone to pause or wait between digits while dialing. A pause makes your phone pause for three seconds before dialing further. A wait makes your phone wait for your response before dialing further.
Tip: To display the next or previous entry, scroll right or left. Filtering Contacts Entries You can set Contacts to display only entries containing Direct Connect numbers, Groups, and Talkgroups. 䊳 Press / > Contacts > / > Filter > Show DC. Select Show All to display all Contacts entries. Finding Speed Dial Numbers 䊳 Press / > Contacts, select an entry and select a phone number. The speed dial number is listed directly under the contact phone number. Adding a Number to an Entry 1.
1. Press / > Contacts and highlight an entry. 2. Press / > Delete Contact. 3. Press r or press Yes (left softkey) to confirm. Deleting a Number or Address 1. Press / > Contacts and highlight an entry. 2. Scroll left or right to display the Contacts type to delete. 3. Press / > Delete Number. 4. Press r or Yes (left softkey) to confirm. Note: If an entry contains only one number or address, deleting the number or address deletes the entry.
4. Enter an available speed dial number and press r. 5. Press Back (right softkey) and then press Save (left softkey) to save the changes. Note: If you attempt to assign an already in-use speed dial location to a new phone number, a message will appear asking if you wish to overwrite the existing speed dial assignment. Press Yes (left softkey) to assign the location to the new phone number and delete the previous speed dial assignment.
9. Tools ⽧ Datebook (page 105) ⽧ My Info (page 110) ⽧ Java Applications (page 111) ⽧ Digital Rights Management (DRM) (page 113) ⽧ GPS Enabled (page 114) ⽧ Memo Feature (page 119) ⽧ Voice Records (page 120) ⽧ Call Timers (page 121) Datebook Datebook stores up to 250 events. You can store events over a thirteen month period — twelve months after and one month before the current date. A Datebook event contains: 䢇 䢇 䢇 䢇 䢇 䢇 䢇 䢇 䢇 A subject — A name or number you assign to the event.
You can view Datebook by the day, by the week, or by the month. You can also view the details of any event. 䢇 In day view, brief information about each event for that day appears. 䢇 In week view, events appear as markers corresponding to their times. 䢇 In month view, days with events are marked. To view an event: 1. Select the day the event occurs. 2. Select the event. To see more in day view: 䊳 Scroll up and down using the navigation key.
and: 䡲 Enter the name or enter a phone number, Direct Connect number, or Talkgroup number. – or – Press Browse (left softkey) to choose from common event names. 3. To assign a location to the event (optional), select Location and enter the location or enter a phone number, Direct Connect number, or Talkgroup number. 4. The start time automatically assigned to an event is the beginning of the day.
event, your phone prompts you to start the Java application when you get the reminder.) 12. Once you have entered all relevant information and settings, press Done (left softkey). To cancel without saving: 䊳 Press Cancel (right softkey). 5. To change more information, follow the applicable instructions in “Creating Events” on page 106 to edit the event. 6. Press Done (left softkey) to store the event. Deleting Events 1. Select the day the event occurs. Editing Events 2.
䊳 Press View (left softkey). To dismiss the reminder: 䊳 Press Dismiss (right softkey). For Events With Java Applications If you assigned a Java application to start when the event starts, you can start the application when you get the reminder. 䊳 Press / > Launch.
Making Calls From Datebook Reminders To call a number: 䊳 Press ` or press / and then select Call # in Event. To make Direct Connect calls or Talkgroup calls: 䊳 Press the DC button. To send a Call Alert: 䊳 Press / > Alert # in Event, and then press the DC button. Customizing Datebook Setup Press / > Tools > My Info. Information displayed includes My Name (optional, you may enter it yourself), Mobile, Direct Connect, Work1, Work2, Home, Email, Fax, Pager, Talkgroup, IP or Other.
Java Applications To suspend an application: Installing Applications To view your suspended applications: 1. Press / > Games and Apps. 2. Select an application or suite of applications. Messages appear as the application installs. 3. Press Done (left softkey). Running Applications 䊳 Press @. Tools 䊳 Press / > Games and Apps > Suspended Apps. You can have up to three applications running at one time — one running in the foreground and two in the background. Resuming Applications 1.
To end an application from the Suspended Apps Screen: 1. Press Games and Apps > Suspended Apps. 2. Highlight an application and press End (left softkey). To end all applications: 1. Press / > Games and Apps > Suspended Apps > / > End All. 2. Press r or press Yes (left softkey) to confirm. 3. To end all applications without letting them exit, press EndNow (left softkey) and then press Finish (right softkey). Downloading Applications To run more Java applications, you can download them into your phone.
4. Scroll to the Java application you want to move and press Grab (left softkey). 5. Scroll to the menu location where you want to place the Java application and press Insert (left softkey). Digital Rights Management (DRM) When you download multimedia content available online, such as Java applications, these items may be subject to DRM restrictions. DRM, or digital rights management, is a system that defines how copyrighted multimedia content can be distributed and used.
Renewing DRM Licenses Note: Java application data is stored in your phone using the same memory space used to store messages, voice records, pictures, ring tones, and wallpaper images. Deleting some of these other items frees memory for Java applications. 1. Go to the location on your phone that contains the item. 2. Highlight a DRM item and press Renew (left softkey) or press / > Renew. 3.
When you make a 911 emergency call, the GPS feature of your phone can help emergency personnel locate you if your phone has adequate access to GPS satellite signals and your emergency response center is equipped to process such information. You can also use the GPS feature to view your approximate location. Location information appears on the phone’s display. Java applications loaded on your phone can also request your location.
information. For this reason, and because the GPS location information reported is only approximate or may not be available in your location, always report your location to the 911 operator you speak to when making an emergency call, if able, just as you would when using a phone without GPS capabilities. Note: If you are concerned about whether your local 911 emergency response center is equipped to receive GPS location information, contact your local authorities.
䢇 䢇 䢇 Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage. Hold your phone to enhance reception. Signals from GPS satellites are transmitted to your GPS antenna, which is in your phone antenna. Hold your phone away from your body, giving the antenna clear access to satellite signals. Do not cover the antenna area with your fingers or anything else. Stand still.
Note: Because your phone is continuously determining your location, using the GPS feature of your phone with map software uses the phone’s battery power quickly. To connect your phone to your laptop or other device: 1. Pull open the connector cover. 2. With the phone’s display facing up, insert a micro-USB data cable into the charger connector.
Memo Feature To make a call to the memo number: To create a memo: 2. To make a phone call, press `. To make a Direct Connect call, press the DC button. To store the memo number to Contacts: 1. Press / > Tools > Memo. 1. Press / > Tools > Memo. 2. Enter a number and press r. 2. Press / > Store to Contacts. To view the memo later: 䊳 Press / > Tools > Memo. To delete the memo: 1. Press / > Tools > Memo. 2. Press and hold Delete (left softkey) and then press r. To edit the memo: 1.
Voice Records A voice record is a recording you make with your phone and can play back. You can record notes to yourself or phone calls. Your phone can store up to 20 voice records. Creating Voice Records 1. Press / > Multimedia > VoiceRecord > [New VoiceRec]. 2. Recite a message into the microphone. 3. When you are finished recording, press r. To record a phone call: 1. Press / > Multimedia > VoiceRecord. 2. Highlight a voice record and press r. 3. To stop the voice record while it is playing, press r.
Managing Memory To delete an unlocked voice record: To view the amount of memory available for voice records: 1. Press / > Multimedia > VoiceRecord. 1. Press / > Multimedia > VoiceRecord. 2. Highlight a record and press / > Delete. 2. With [New VoiceRec] highlighted, press Memory 3. Press r or Yes (left softkey) to confirm. To delete all unlocked voice records: Tools Deleting Voice Records (left softkey). Call Timers 1. Press / > Multimedia > VoiceRecord. 2.
䢇 Kbytes Reset — keeps a running total of the number of kilobytes sent and received by your phone, until you reset it. To view or reset a timer: 1. Press / > Tools > Call Timers. 2. Highlight a timer and press r. 䡲 To reset a timer, highlight Phone Reset, DC/GC Reset, or Kbytes Reset and press r. Press Reset (left softkey). Press r or press Yes (left softkey) to confirm. Note: The values displayed by Call Timers should not be used for billing. Call times are estimates only. 122 9.
Inserting the microSD Card 10. microSD Card 1. Remove the battery cover. (See “Installing the Battery” on page 12.) 2. Open the memory card slot cover, and slide in the Using a microSD Card With Your Phone (page 123) ⽧ microSD Settings (page 125) ⽧ microSD Folders (page 126) ⽧ Connecting Your Phone to Your Computer (page 127) microSD Card memory card until it clicks into place.
Note: Be sure to use only recommended microSD cards. Using non-recommended microSD cards could cause data loss and damage your phone. Your handset can be used with Transflash or microSD memory cards. 4. Grasp the raised edge of the microSD card and pull the card out. 3. Close the memory card slot cover and replace the battery cover. 4. Your phone may prompt you to use the memory card to store new media items, go to Music Player, go to the Camera, go to the Media Center, or do nothing.
Tip: If your computer has an SD card slot or if you have an SD card adapter, you can use the microSD card and adapter to transfer files such as audio files, pictures, and videos directly between your computer and your microSD card. The supplied microSD adapter allows microSD cards to be used in SD-compatible devices such as digital cameras, printers, and computers. Before using, you will need to insert the microSD card into the microSD adapter.
Setting Storage Options You can set your phone to store pictures, videos, music, and audio recordings on an inserted microSD card instead of in the phone’s memory (when available). 1. With the microSD card inserted, press / > Settings > Memory Card > Store Media. 2. To store pictures, videos, music, and audio recordings on the memory card, select Prefer On Card. Formatting the microSD Card Formatting a microSD card permanently removes all files stored on the card. 1.
Before using your phone’s mass storage capabilities, you need to prepare your phone’s data services to synchronize with your desktop or laptop computer. Once the phone is connected to the computer, you can transfer your data to or from the microSD card. 1. With the microSD card inserted, press / > follow the onscreen instructions to safely unplug the USB cable. Important Connection Information 䢇 䢇 Settings > Connections > USB. 2. Highlight Memory Card Access and press r.
2. Using the external display screen as a viewfinder, 11. Camera aim the camera lens at your subject. 3. Press , (center touch media key) until the shutter sounds. Tip: To take a self-portrait: open the phone, use the internal ⽧ Taking Pictures (page 128) ⽧ Camera Options (page 129) ⽧ Recording Videos (page 130) ⽧ Storing Pictures and Videos (page 132) Taking Pictures Taking pictures with your phone’s built-in camera is as simple as choosing a subject, pointing the lens, and pressing a button.
Remove Card to enable the memory card removal. ● ● ● 䢇 GPS Tag the option to turn GPS Tag on or off. 䢇 Picture Quality to select the picture quality between Normal or Fine. 䢇 Picture Size to select the picture size. 䢇 White Balance to select a white balance setting. 䢇 Exposure Control to adjust the exposure. 䢇 Style to set the picture effect. 䢇 Memory Usage to verify memory usage. 䢇 Memory Card to access the memory card menu. 䢇 Camera Setup to set the camera default settings.
To cancel the self timer after it has started: 䊳 Default Quality: Highlight Normal or Fine and 䡲 GPS Tag: If this option is On, pictures will be press r. Press Cancel (right softkey). Using the Zoom Depending on your resolution settings, you can adjust the zoom from 1x to 4x. To adjust the zoom: 1. While in camera mode, press / > Zoom. 2. Select from 1X, 2X or 4X. Camera Setup Set your camera’s resolution and default size in the Camera Setup menu. 1. While in camera mode, press / > Camera Setup. 2.
recording. If the phone is open, press Record (left softkey). 4. Press Stop (center touch media key) to stop recording. If the phone is open, press Stop (left softkey). 䡲 If the video was recorded with the phone open, press r to save or Discard (right softkey) to delete the video and return to camcorder mode. 5. Press / for more options: 䡲 Review to play back the video. 䡲 Send Via... to send the video via Bluetooth or 䡲 Save [OK] to save the video.
Selecting Video Settings 1. From video mode, press / > Camera Setup. 2. Highlight an option and press r: 䡲 Ask for Name: Select On for the camcorder to prompt you to enter a new file name when saving a video file. 䡲 Shutter Sound: Highlight an option and press r. 䡲 Default Video Size: Highlight an option and press r. Phone Folder Your phone’s internal storage area is called the Phone folder.
When you are highlighting a picture or video file in the phone or microSD card folders, press / to display the following options: 䢇 Delete to delete the selected file. 䢇 Lock to lock the selected file. 䢇 Rename to rename the selected file. 䢇 Send Via... to send the file via Direct Send, Bluetooth, or Messaging. 䢇 Camera to activate Camera mode. 䢇 Remove Card to enable the memory card removal. 䢇 Set As Caller ID to display the currently highlighted picture for incoming calls from a specific Contacts entry.
To turn Bluetooth on: 12. Bluetooth 1. Press / >Tools > Bluetooth > Setup > Power. 2. Highlight On and press r to enable Bluetooth. To turn Bluetooth off: ⽧ Turning Bluetooth On and Off (page 134) 1. Press / > Tools > Bluetooth > Setup > Power. ⽧ Bluetooth Menu (page 135) 2. Highlight Off and press r to disable Bluetooth.
Bluetooth Menu The Bluetooth menu allows you to set up many of the characteristics of your phone’s Bluetooth service. 1. Press / > Tools > Bluetooth. 2. Set your Bluetooth options. Select Audio Devices to discover and connect to hands-free devices. 䡲 Select Pair to Devices to scan for and pair your phone to an available Bluetooth device. 䡲 Select Device History to link to devices that have been connected to your phone.
Note: Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different, and functions such as transfer or exchange may not be possible with all Bluetoothcompatible devices. To use Bluetooth during a call: 1. While in a call, press / > Use Bluetooth. 2. Select a device. Disconnecting From a Device Connecting to a Stored Device 1. Press / > Tools > Bluetooth > Audio Devices.
request permission before it can connect to your phone. Sending Items via Bluetooth Devices are automatically granted permission during the ten seconds after connecting. Sending Contacts, Datebook Events and Media Center Items Setting Device Details The device history stores a list of up to 20 devices that have connected with your phone. 䊳 Press / > Tools > Bluetooth > Device History.
4. If prompted, bond with the device. Your phone 3. Select a device or search for a device by selecting [Look for Devices]. connects to the device and transfers the contact. Sending Datebook Events 4. If prompted, bond with the device. Your phone connects to the device and transfers the file. 1. Press / > Tools > Datebook. 2. Highlight an event and press / > Send Via.... 䡲 For a repeating event, select This Event Only to send only this occurrence or Repeat Events to send all instances. 3.
Viewing and Storing Received Items After an incoming transfer is complete, your phone translates the item and it appears on the display. 䊳 To store an item, press Store (left softkey). 䊳 To discard an item without saving it, press Discard (right softkey). Bluetooth You can choose to either store or discard the item. Items are stored as follows: 䢇 Contact entries are stored to Contacts. 䢇 Pictures and audio files are stored to their folders and are accessible through the Media Center.
䢇 13. Multimedia 䢇 䢇 䢇 ⽧ Media Center (page 140) ⽧ My Music (page 144) ⽧ My Images (page 152) ⽧ My Videos (page 153) Media Center The Media Center provides convenient access to all supported multimedia files on your device or your memory card. Note: The Media Center cannot read the Music and Podcast folder from the microSD card. Voice records created when your phone was not in a call. Musical ringtones in the list of ringtones. Audio files saved from MMS messages.
䊳 Press / > Multimedia > Media Center > / > Filter and select a filtering option: Phone: All, Phone: Pictures, Phone: Audio, Phone: Video, Card: All, Card: Pictures, Card: Audio, or Card: Video Keeping the Last Filter Setting You can set the Media Center to show all items every time you access it or to keep the filtering setting you had when you last viewed it. 䊳 Press / > Multimedia > Media Center > / > Setup > Remember Filter > On.
When an item is locked, it cannot be deleted from the Media Center. See “Locking Items” on page 142. Locking an item has no effect on its forward locking. DRM Items Except for Java applications, which download to Java Apps, the default location for any DRM items that you download is the Media Center. Depending on how a vendor has set rights for an item, the item may include the following status icons. k The item is a DRM item. l The DRM item has expired. All DRM items are forward locked.
Pictures You can delete all unlocked items currently in view, depending on how Media Center filtering is set. See “Filtering by Media Type” on page 141. If filtering is set to show all types of Media Center items, all unlocked items are deleted. The Media Center lets you view pictures and send them in MMS messages, with Nextel Direct Send, or with Bluetooth. You can also assign them to Contacts entries or set them as your phone’s wallpaper. 1. Press / > Multimedia > Media Center. 2.
2. Create and send the message. (See “Creating and Sending Messages” on page 51.) The picture you selected is automatically attached. Setting Pictures as Wallpaper 䊳 Highlight or select a picture and press / > Set As Wallpaper. Sending Pictures With Direct Send 1. Highlight or select a picture and press / > My Music Send Via... > Direct Send. 2. Select A Contact or A Recent Call and select an available recipient. 3. Press the DC button to send the picture.
䢇 Songs — All audio files on the memory card (except 䢇 Playlists — Folders and lists you have created. The music. 3. Press r to play music. podcasts), listed alphabetically by title. Exiting My Music 䊳 To exit My Music, press Exit (right softkey). (If Exit is not an option, press Back [right softkey] until it is.) My Music on the External Display You can launch My Music from the external display by pressing the Smart Button (() and selecting the My Music application from the menu.
Playing Audio Files Note: Audio File Formats: My Music does not support all audio file formats or bit rates/sampling rates. Supported extensions include .3ga, .3gp, .aac, .amr, .au, .awb, .imy, .m4a, .mid, .midi, .mmf, .mp3, .mp4, .mpga, .mxmf, .ra, .ram, .rm, .smf, .wav, .wma, .xmf, .xmf0, and .xmf1. Any time you are viewing a list of folders with My Music, you can highlight a folder and press Play (left softkey) to start playing the contents of that folder or press r to view the contents of the folder.
To rewind a playing audio file, press and hold the navigation key to the left. Adjusting the Volume 䊳 To adjust the volume, use the volume button. Playing Music in the Background Your phone can continue to play music in the background while you are accessing other features. To play music in the background: 䊳 With music playing, press / > Hide Player. The music player continues playing and the display returns to standby mode. To return to the music player, press Music (right softkey).
DRM Items Some of the audio files on the memory card may be DRM (digital rights management) items. When a DRM items has expired, you can no longer play it. If you highlight an audio file that is expired and try to play it, a message saying you cannot play it appears. If you play a list containing an expired audio file, My Music skips over the expired item and no message is displayed. Working With Playlists Playlists let you group audio files that you’d like to hear together.
You can change the order of the audio files on a playlist. 1. Before you have saved a new playlist or while editing a playlist, press / > Reorder Songs. 2. Highlight a title and press Grab (left softkey). 3. Highlight a new location and press Insert (left softkey). 4. Repeat steps 2 and 3 for all the items you are moving. 5. Press Done (right softkey) and then press Save (left softkey). 3. Press Save (left softkey). To remove all files from a playlist: 1.
Using the Favorites Playlist The Favorites playlist is a permanent playlist. You can add, remove, and change the order of the files, but you cannot rename it or delete it. You can add audio files to the Favorites playlist as you would any other playlist. You can also add audio files to the Favorites playlist using the Add to Favorites shortcut.
1. Press / > Multimedia > My Music. 2. Select the folder containing the audio files: Albums, Artists, or Genres. 3. Highlight an album, artist, or genre, and press / > Delete Album, Delete Artist, or Delete Genre. 4. Press Yes (left softkey) to confirm. Deleting All Audio Files Deleting everything in the Songs, Albums, Artists, or Genres folder deletes all audio files from the memory card. 1. Press / > Multimedia > My Music > Songs, Albums, Artists, or Genres. 2. Press / > Delete Songs > / > All. 3.
My Images 䢇 The My Images application lets you easily browse, edit and view a slideshow of images on your phone or memory card on your internal display, or browse, view a slideshow on the external display. 䢇 My Images Menu 䢇 The My Images menu has many image management features. The following options are available for existing images by pressing / > Multimedia > My Images > /.
My Images has several options for editing your photos including: Crop, Rotate/Flip, Color Adjustments, Resize, Borders, Stamps, Text, and Text Bubble. 䊳 Press / > Multimedia > My Images > / > Edit and follow the prompts to edit the picture.
When viewing a video, use the r button to pause or play the video playback. 䡲 Press and hold the navigation key to the right to fast forward the video. 䡲 Press and hold the navigation key to the left to rewind the video. 䡲 My Videos Setup Menu 䊳 Press / > Multimedia > My Videos > / > Setup. The My Videos Setup Menu allows you to change settings for View, 3D Audio and Reverbs.
Safety and Warranty Information
S1.
Note: For the best care of your phone, only authorized personnel should service your phone and accessories. Failure to do so may be dangerous and void your warranty. Tip: Purchase an optional hands-free accessory at your local Sprint Store, or call Nextel at 1-866-866-7509. Do Not Rely on Your Phone for Emergency Calls Mobile phones operate using radio signals, which cannot guarantee connection in all conditions. Therefore you should never rely solely upon any mobile phone for essential communication (e.
Operational Precautions Note: Always turn off the phone in healthcare facilities, and request permission before using the phone near medical equipment. To assure optimal radio product performance and to be sure that human exposure to RF does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions: Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone.
Turning Off Your Phone in Dangerous Areas 䢇 To avoid interfering with blasting operations, turn your phone off when in a blasting area or in other areas with signs indicating two-way radios should be turned off. Construction crews often use remote-control RF devices to set off explosives. 䢇 Turn your phone off when you’re in any area that has a potentially explosive atmosphere. Although it’s rare, your phone and accessories could generate sparks.
awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are very tired. Caution About High Volume Usage WARNING: Exposure to loud noise from any source for extended periods of time may affect your hearing. The louder the volume sound level, the less time is required before your hearing could be affected.
Don’t place your battery near a heat source. Excessive heat can damage the phone or the battery. High temperatures can cause the battery to swell, leak, or malfunction. Therefore: 䡲 Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven. 䡲 Avoid leaving your phone in your car in high temperatures. DOs 䢇 䢇 Do avoid dropping the battery or phone. Dropping these items, especially on a hard surface, can potentially cause damage.
Disposal of Lithium Ion (LiIon) Batteries: Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center or national recycling organizations for more information on how to dispose of batteries. Do not handle a damaged or leaking Li-Ion battery as you can be burned. WARNING: Never dispose of batteries in a fire because they may explode. Special Note: Be sure to dispose of your battery properly.
Don’t store the battery in high temperature areas for long periods of time. It’s best to follow these storage rules: Less than one month: -4° F to 140° F (-20° C to 60° C) More than one month: -4° F to 113° F (-20° C to 45° C) Batteries and Chargers Your battery, charger, or portable radio may contain symbols, defined as follows: Symbol 032374o 032376o 032375o Definition Important safety information follows. Do not dispose of your battery or phone in a fire.
Ratings have been developed for mobile phones to assist hearing device users find phones that may be compatible with their hearing device. Not all phones have been rated for compatibility with hearing devices. Phones that have been rated have a label with the rating(s) located on the box, and are listed at www.motorola.com/accessibility. These ratings are not guarantees. Results will vary depending on the user’s hearing device and individual type and degree of hearing loss.
Getting the Best Hearing Device Experience With Your Phone To further minimize interference: 䢇 Set the phone’s display and keypad backlight settings to ensure the minimum time interval: 1. Press / > Settings > Display/Info > Backlight > Timer or Java Timer. 2. Highlight the minimum time interval setting and press r. 䢇 䢇 Position the phone so the internal antenna is farthest from your hearing aid. Move the phone around to find the point with least interference.
Export Law Assurances This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade.
RF Energy Interference/Compatibility Nearly every electronic device is subject to RF energy interference from external sources if inadequately shielded, designed, or otherwise configured for RF energy compatibility. In some circumstances your mobile device may cause interference with other devices. Follow Instructions to Avoid Interference Problems 䢇 䢇 䢇 Turn off your mobile device in any location where posted notices instruct you to do so.
Operational Warnings National Council of Radiation Protection and Measurements (NCRP). Obey all posted signs when using mobile devices in public areas. Body-Worn Operation Areas with potentially explosive atmospheres are often, but not always, posted and can include fueling areas, such as below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air contains chemicals or particles, such as grain dust, or metal powders.
䢇 䢇 䢇 䢇 䢇 American National Standards Institute (ANSI) / Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1992. Institute of Electrical and Electronics Engineers (IEEE). C95. 1-2005 Edition.1 International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998. Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999.
multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output. Before a phone model is available for sale to the public in the U.S. and Canada, it must be tested and certified to the FCC and Industry Canada that it does not exceed the limit established by each government for safe exposure. The tests are performed in positions and locations (e.g.
Software Copyright Notice MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. ©2009 Motorola, Inc. All rights reserved. The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media.
Open Source Software Information For instructions on how to obtain a copy of any source code being made publicly available by Motorola related to software used in this Motorola mobile device you may send your request in writing to: MOTOROLA, INC. OSS Management 600 North US Hwy 45 Libertyville, IL 60048 USA The Motorola website opensource.motorola.com also contains information regarding Motorola’s use of open source. Motorola has created the opensource.motorola.
䢇 Smart Practices While Driving 䢇 Drive Safe, Call Smart SM Check the laws and regulations on the use of mobile devices and their accessories in the areas where you drive. Always obey them. The use of these devices may be prohibited or restricted in certain areas. Contact www.motorola.com/callsmart for more information. Your mobile device lets you communicate by voice and data— almost anywhere, anytime, wherever wireless service is available and safe conditions allow.
䢇 䢇 Use your phone to help others in emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you.* Call roadside assistance or a special non-emergency wireless assistance number when necessary.
S2. Manufacturer’s Warranty Motorola Limited Warranty for the United States and Canada ⽧ Motorola Limited Warranty for the United States and Canada (page 175) ⽧ Service and Repairs (page 179) Your phone has been designed to provide you with reliable, worry-free service. If for any reason you have a problem with your equipment, please refer to the manufacturer’s warranty in this section. For information regarding the terms and conditions of service for your phone, please visit www.nextel.
Products and Accessories Products Covered 176 Length of Coverage Products and Accessories as defined above, unless otherwise provided for below. One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below. Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap™ covers and cases. Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product. Monaural Headsets.
Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than Motorola, or its authorized service centers, are excluded from coverage. Altered Products.
What Will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled.
Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.
Index A Accessories 21 Charger 21 Li-Ion Battery 21 Activation 2 Airplane Mode 78 Answering Calls 23 Applications See also Java Applications Attachments 58 See also MMS Messages Audio Files Fast Forward and Rewind 146 Inserting in Messages 56 Pause 146 Playing 146 Resume 146 See also Voice Records Skip 146 180 Index Volume 147 B Backlight 74 Battery 11–13 Charging 13 Disposal 162 Installing 12 Safety 160 Bluetooth 134–139 Deleting Received Items 139 Receiving Items 138 Sending Contacts 137 Transfers, Canc
Contacts 98–104 Adding an Entry 99 Assign a Picture to an Entry 104 Creating 99 Deleting 103 Editing Entries 102 Making Direct Connect Calls 30 Making Phone Calls 28 Searching 101 Voice Name 100 D Datebook Creating Events 106 Deleting Events 108 Editing Events 108 Making Calls From Datebook and Datebook Reminders 109 Receiving Reminders 108 Using Your Phone’s Datebook 105 Dialing Codes Non-Emergency Numbers 65 Telecommunications Relay Service 65 Digital Rights Management See DRM Direct Connect One Touch, S
Receiving My Info 39 Receiving Pictures 36 Direct Talk Code 45 Private Only 46 Receiving All Calls On Channel 47 Setting Up 45 Display Screen 14 Downloading Content 69 DRM 113 Deleting Items 143 Expired Items 114 Managing Items 113 Renewing Items 114 Renewing License 114 Status Icons 142 Viewing License Information 113 E Email 67 Emergency Numbers 24 End-of-Call Options 26 182 Index Entering Text 17–21 Alpha Mode 19 Numbers 19 Quick Notes 19 Selecting Mode 17 Word Text Input 18 Creating Groups 32 Deletin
M Java Applications 111–112 Deleting 112 Downloading 112 Downloading Games 69 Ending Applications 111 Installing Applications 111 Memory 114 Privacy 89 Reorder Java Applications 112 Resuming Applications 111 Running Applications 111 Suspending Applications 111 K Key Functions 6 L Language 86 Lock Code Changing 92 Locking Your Keypad 92 Making Calls 23 Media Center 140 Deleting 142 Forward Locked 141 Locking Items 142 Memory 143 Pictures 143 Renaming Items 142 Viewing 140 Memo 119 Calling From 119 Editing
Deleting 58 Embedded Objects 58 Forwarding 57, 58 Going to Website 60 Locking 59 Memory 77 Outbox 57 Quick Notes 55 Receiving 57 Sending 51 Multimedia 140–151 Multimedia Messages See MMS Messages Music Fast Forward and Rewind 146 Pause and Resume 146 Playing 146 Volume 147 Mute 26 My Info Editing 110 Receiving 39, 94 184 Index Sending 37 My Music Accessing 144 Deleting Files 150 Equalizer 151 Folders and Lists 145 Playlists 148 Repeat 147 Visuals 151 N Nextel Direct Send See Direct Send Nextel Direct Talk
S Q Quick Notes 55 R Radio Frequency 166 Recent Calls 93–96 Call Alerts 94 Deleting Recent Calls List 96 My Info 94 Prepending a Number 97 Saving a Number 96 Remote Direct Connect Button 21 Resetting Your Phone 86 Rewind Music 146 Ring Tones Deleting 71 Memory 71 Setting in Contacts 100 Vibrate 73 Ringer Types 70 Safety Information 156–174 Radio Frequency 166 Tips 157 Security 90–92 Shortcuts Creating 83 Deleting 84 Editing 84 Using 83 Silence All 73 SIM Card Removing and Inserting 10 Security 90 SIM PIN
T V Talkgroups 40 Join 41 Settings 89 TDD/TTY Devices 65 Telecommunications Relay Service 65 Text Entry 17–20 Database 18 Mode 17 Text Messaging See MMS Messages Three-Way Calling 62 Transmitters Turning On and Off 78 TTY Devices 65 Turning Your Phone On and Off 13 U Unlocking Your Keypad 92 Unlocking Your Phone 92 186 Index Vibrate All 72 Video 130 External Display 154 My Videos 153 Options 131 Recording 130 Settings 132 Viewing 153 Voice Name 28, 31 Creating 100 Voice Records Creating 120 Deleting 12
