SouthernLINC Wireless iDEN Digital Multi-service Data-capable Phone i833 Phone User’s Guide NNTN7009B
IMPORTANT NOTICE: PLEASE READ PRIOR TO USING YOUR PHONE The SIM card provided with this kit is intended for use with the phone provided in this package. Loss of certain features will result when using a SIM card from one of the following models: i30sx, i35s, i50sx, i55sr, i58s, i60c, i80s, i85s, i88s, i90c, i95cl series, and the i2000 series. For more information on SIM card compatibility, go to www.motorola.com/iden/support.
Contents Getting Started........................................... 1 Removing the Battery Door ...............................3 Locating Your SIM Card ....................................3 Battery ...............................................................4 Activating Service..............................................7 Powering On and Off.........................................7 Enabling Over-the-Air Security..........................8 Finding Your Phone Number and LINC ID ........8 Phone Basics ..
Deleting Entries ...............................................34 Checking Capacity ..........................................34 Creating Pauses and Waits.............................34 International Numbers .....................................35 Accessing Contacts with GSM Phones ...........35 Group Calls ...............................................46 Call Forwarding........................................ 36 Memo .........................................................48 Forwarding All Calls ...
Messages ................................................. 55 Using LINC View.......................................65 Message Notifications .....................................55 Message Center ..............................................56 Sending My Info and Contact Information.......65 Voice Mail Messages ............................... 57 Receiving a Message ......................................57 Accessing Voice Mail from the Message Center ...................................
GPS Enabled ............................................ 81 Profiles ......................................................99 IMPORTANT: Things to Keep in Mind ............81 Making an Emergency Call .............................82 Viewing Your Approximate Location ...............83 Enhancing GPS Performance .........................84 Setting Privacy Options ...................................86 Using GPS with Map Software ........................87 Viewing Profiles......................................
Portable Radio Product Operation and EME Exposure..........................................109 Electromagnetic Interference/Compatibility...112 Implantable Medical Devices.........................112 Operational Warnings....................................113 Operational Cautions.....................................114 Accessory Safety Information........................115 California Perchlorate Label ................. 117 Hearing Aid Compatibility..................... 118 MOTOROLA LIMITED WARRANTY ......
DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i833 Model Number: H74XAH6RR4AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com 1-800-331-6456 (United States) 1-888-390-6456 (TTY/TDD US for hearing impaired) 1-800-461-4575 (Canada) Certain mobile phone features are dependent on the capabilities and settings of your service provider’s network. Additionally, certain features may not be activated by your service provider, and/or the provider's network settings may limit the feature’s functionality.
Getting Started retractable antenna volume controls light sensor Push-To-Talk (PTT) button audio jack speaker (in back) microphone accessory connector 1
Getting Started p Power button. Navigation key — press the arrows to scroll through menus and lists. 2 O OK key — selects highlighted item; answers calls. m Menu key — accesses context-sensitive menus. A Option key — selects the option appearing above it on the display. s Send key — places phone calls. e End key — ends phone calls; returns to idle screen. t Acts like s when the flip is closed; turns speaker on; used with voice names and voice records. .
Removing the Battery Door Removing the Battery Door Locating Your SIM Card 1 Make sure the phone is powered off. See “Powering On and Off” on page 7. 2 Press the release button and pull the battery door away from the phone. Your SIM (Subscriber Identity Module) card is a small piece of plastic located in the SIM card holder in the back of your phone, underneath the battery.
Getting Started If there is no SIM card in your phone or the box, contact SouthernLINC Wireless at 1-800-406-0151. 3 To replace the battery door, locate the tabs on the battery door and the slots in the phone. Battery Inserting the Battery 1 Remove the battery door. 2 Insert the battery into the battery area. Press the battery down to secure it. slots tabs 4 Place the tabs on the battery door into the slots on the phone.
Battery 5 Move the top of the battery door into place. Press it over the release button until you hear a click. 2 Open the connector cover. connector cover 3 Plug the other end of the charger into the accessory connector. Charging the Battery Your phone comes with a battery charger. 1 Plug the charger into an electrical outlet. Charger Attached or Device Attached appears on the internal display.
Getting Started Tip: To remove the charger from the accessory connector: Press the buttons on the sides of the plug. Pull the plug straight out. 4 If you have purchased optional batteries or chargers, see “Charging Times”. Removing the Battery 1 With the phone powered off, remove the battery door. 2 Remove the battery by lifting it out from the side. Charging Times See your battery and charger to determine the appropriate charging time.
Activating Service • Lithium Ion batteries have a self discharge rate and without use, lose about 1% of their charge per day. • The battery capacity is degraded if the battery is stored for long periods while fully charged. If long term storage is required, store at half capacity. Activating Service The first time you power on your phone, you must be in your local calling area. This activates your service. Powering On and Off To power your phone off: 1 Open the flip. 2 Press and hold p.
Getting Started Note: If you press A under Later, you will be prompted to enable security each time you power on your phone until you press A under Ok. As your phone connects to the network, you will see a welcome message and a connecting message. When the idle screen appears, the phone is ready to use. 2 Press A under Ok. 3 You are prompted to enable security. Press A under Yes. A series of screens appears. If you subscribe to the appropriate SouthernLINC Wireless plan, your home page appears.
Phone Basics Phone Basics Display Options Any time your phone is powered on, the display provides you with information and options. Two display options appear at the bottom of most screens. You select a display option by pressing the option key below it. The external display shows a shortened version of the internal display. To see more information, open the flip. status icons text area menu icon display options Menus and Lists Your phone’s features are arranged in menus, submenus, and lists.
Getting Started • Confirms actions • Places and answer calls e Messages Access messages. See page 55. Menu Key f Call Forward Set call forwarding options. See page 36. o Datebook Schedule appointments. See page 68. g Memo Store a number to access later. See page 48. h Call Timers Phone usage information. See page 41. i Recent Calls Lists recent calls. See page 25. Many features provide context-sensitive menus that let you access related features and actions.
Phone Basics l GPS Find your approximate geographical location. See page 81. m Ring Tones Assign ring tones and turn ringer off. See page 49. Quick Access to Main Menu Items Each arrow in the navigation key and O can be used to access a main menu item from the idle screen. Each of these keys is assigned to a main menu item when you receive your phone. To assign different main menu items, see “Personalize Features” on page 96. Status Icons Status icons appear at the top of the display.
Getting Started Y Z N t O Packet Data — You are ready to transfer packet data or are transferring packet data. See page 42. TTY — You are ready to use your phone to make calls using a teletypewriter device. See page 43. Roaming — You are using your phone outside of the SouthernLINC Wireless network. SIM Card Security Your SIM card protects your personal information. The SIM card stores all your Contacts information.
SIM Card Security 6 At the Re-enter New SIM PIN screen, re-enter the new SIM PIN to confirm. 7 Press A under Ok. Turning the PIN Requirement On and Off When the SIM PIN requirement is on, you are prompted to enter your PIN each time you turn on your phone. Note: If a SIM PIN is required, your phone will not function until the SIM PIN is entered, except for making emergency calls. When the PIN requirement is off, your phone can be used without entering a PIN.
Getting Started Inserting and Removing Your SIM Card Important: Do not touch the gold-colored areas of your SIM card. Switching SIM Cards Moving your SIM card from one phone to another moves all your Contacts information, but erases other information.
Antenna 3 Carefully slide your SIM card into the SIM card holder. 5 Lock the SIM card holder: While holding the bottom of the SIM card holder in place with one finger, gently press the top of the holder until you hear the holder click into place. Hold here. Press here. 4 Close the SIM card holder. Note: Protect your SIM card as you would any delicate object. Store it carefully.
Getting Started To extend the antenna, pull gently on the rounded tip until the antenna is fully extended and clicks into position. When finished with a call, retract the antenna by pushing gently on the rounded tip until the antenna clicks into place. To optimize your phone’s performance, extend the antenna when you make or receive a call, and avoid touching the antenna with any body part.
Making Calls Your i833 phone makes two types of calls: digital cellular phone calls and InstantLINC Mobile to Mobile calls. With InstantLINC Mobile to Mobile calls, you use your phone as a long-range, digital walkie-talkie. With the Flip Closed 1 Select the number you want to call from the recent calls list and press t (see “From the Recent Calls List” on page 19). -orUse a voice name to select the number and place the call (see “Using a Voice Name” on page 20). Phone Calls 2 To end the call, press ..
Making Calls Receiving Calls Ending If the flip is closed, press .. -or- Phone Calls Press e. -or- When you receive a phone call, your phone rings, vibrates, or lights up its backlight. Answering If the flip is closed, press t. -orOpen the flip. -orPress s. -orPress O. -orPress A under Yes. -orPress any number key. To answer a call by opening the flip, you must have the Flip to Ans feature turned on (see “Setting Flip Actions” on page 41).
Ways to Enter Calls • To clear all digits, press and hold A under Delete. • To insert or delete a digit anywhere in the string of digits you have entered, scroll left or right. • To cancel, press e. From the Recent Calls List The recent calls list stores the last 20 calls you made or received. With the Flip Open 1 From the main menu, select Recent Calls. 2 Scroll to the name or number you want to call. With the Flip Closed 1 Press . to display the most recent call.
Making Calls From Datebook If you have numbers stored as part of events in Datebook, you can use these numbers to make calls. For information on storing events in Datebook, see “Datebook” on page 68. 1 From the main menu, select Datebook. 2 Select the day of the event containing the number you want to call. 3 Highlight or select the event containing the number you want to call. For details, see “Making Calls From Datebook” on page 73.
Missed Phone Calls Turbo Dial From the idle screen, press and hold the Speed Dial number (1 through 9) assigned to the phone number you want to call. Using One Touch PTT One Touch PTT sets your phone to call the most recent LINC ID on the recent calls list, or a LINC ID you choose, every time you press the PTT button. See “Setting One Touch PTT” on page 40. Using Speakerphone Turning on speakerphone makes incoming sound come out of the phone’s speaker instead of the earpiece.
Making Calls To turn mute off: Press A under Unmute. Making Emergency Phone Calls Your phone supports emergency calling. Emergency phone calls can be made even when your SIM card is blocked or not in your phone. Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911.
Call Alerts Receiving Call Alerts Sending a call alert lets the recipient know you want to talk to him or her on an InstantLINC Mobile to Mobile call. When you receive a call alert, you must answer, queue, or clear it. You cannot receive phone calls or InstantLINC Mobile to Mobile calls until you do. When you send a call alert, the recipient’s phone emits a series of beeps, or vibrates, and displays your name or LINC ID.
Call Alerts 1 From the main menu, select Call Alert. 2 Scroll through the list. 3 Press A under Alert. Ready to Alert appears on the display. 4 Press the PTT button until Alert Successful appears on the display. Viewing Date and Time Deleting Call Alerts To view the date and time a call alert was received: To delete a call alert from the queue: 1 From the main menu, select Call Alert. 2 Select the call alert you want information on.
Recent Calls The recent calls list stores information associated with calls you have made and received and call alerts you have received. The recent calls list also stores My Info and contact information sent to you from other phones. Call alerts you have received appear as InstantLINC Mobile to Mobile calls. Like all items in the recent calls list, they remain listed until you delete them or until they reach the end of the list.
Recent Calls When you select My Info from other phones to view its details, you see all the information sent. If you receive My Info from the same phone more than once, only the most recently sent version appears in the recent calls list. Contact Information From Other Phones The recent calls list stores contact information sent from other phones. This information comes from the other phone’s Contacts list or recent calls list. See “Sending My Info and Contact Information” on page 65.
Storing Items to Contacts With the Flip Closed 1 Press .. 2 If you want to view the rest of the recent calls list, press the volume controls. 3 Press . to dismiss the recent calls list. Storing Items to Contacts 1 From the recent calls list, scroll to or select the item you want to store. 2 Press A under Store. -orIf Store is not one of your options: Press m. Select Store or Update Contacts. Tip: If the item you want to store is a call, Store does not appear if the number is already stored in Contacts.
Recent Calls Making Calls From the Recent Calls List With the Flip Open 1 From the main menu, select Recent Calls. 2 Scroll to the item containing the number you want to call. • If you scroll to a call, you can make a call to the number that made the call. If the number is stored in Contacts, you can make a call to any of the numbers stored with it. • If you scroll to My Info from another phone, you can make a call to the LINC ID of the phone that sent the information.
Making Calls From the Recent Calls List 3 To make a phone call, press t on the top of your phone. -orTo make an InstantLINC Mobile to Mobile call, press the PTT button.
Contacts Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses. Information stored in Contacts is saved on your SIM card. A Contacts entry contains: • A name — A name is required if you are storing more than one number or address to the entry; otherwise, it is optional. Typically, this is the name of the person whose contact information is stored in the entry. • A ring tone — You can assign a ring tone to each entry.
Viewing Contacts Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See “Creating Pauses and Waits” on page 34. 4 Scroll to view the other numbers and addresses stored for the entry. Tip: To view more entries, continue scrolling. • A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it.
Contacts 2 Select Filter. 3 Set this option to Show All. Creating Entries A number or address and a Contacts type are required for all Contacts entries. Other information is optional. You may enter the information in any order by scrolling through the entry details. After you have entered the number or address, Contacts type, and any other information you want, you can press A under Done to save the entry to Contacts. Tip: Press A under Browse to select a name already in Contacts.
Storing Numbers From the Idle Screen 7 If you want to add more numbers or addresses to the entry: Scroll past the information you already entered. Enter the additional information for the entry using step 2 through step 6. You must assign a name to the entry, if you have not already. 8 Press A under Done. Assigning Options 1 If you have not already, select [Options]. 2 The default Speed Dial number assigned to a phone number is displayed in the Speed # field.
Contacts Editing Entries 1 From the Contacts list, scroll to the entry you want to edit. 2 Press A under Edit. -orIf Edit is not one of your options: Press m. Select Edit. The entry details screen displays. 3 Follow the applicable instructions in “Creating Entries” on page 32 to edit the various fields. Deleting Entries Delete an Entry 2 Scroll left or right to display the Contacts type for the number you want to delete. 3 Press m. 4 Select Delete Number. 5 Press O or press A under Yes to confirm.
International Numbers To program a pause: Press and hold * until the letter P appears. The P represents a 3-second pause. International Numbers For more information, contact your SouthernLINC Wireless sales representative. If you store 17035551235P1234, when you select this number and make a call, your phone dials the first 11 digits, pauses for 3 seconds, then dials the last 4 digits. Accessing Contacts with GSM Phones If you want a pause longer than 3 seconds, press and hold * more than once.
Call Forwarding Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently. Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display: G Phone line 1 is active; calls to phone line 1 are being forwarded.
Forwarding Missed Calls All your calls are now sent to your phone. Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voice mail. Note: To receive voice mail messages, you must first set up a voice mail account with SouthernLINC Wireless. Forwarding Missed Calls You can specify a forwarding number for each type of missed call: • If Busy — Your phone is on a call or transferring data. • If No Answer — You do not answer on the first 4 rings.
Advanced Calling Features Call Waiting Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. If you are on a call and receive a second call, your phone emits a tone and displays a message saying you are receiving a second call. To accept the second call and put the active call on hold: Press A under Yes. To accept the second call and end the active call: 1 Press e. Your phone rings with the second call.
Putting a Call on Hold Putting a Call on Hold Merging 2 Calls into a 3-Way Call 1 While on an active call, press m. 2 Select Hold. After you put a call on hold and place a second call, you can combine these calls into a 3-way call: If you want to make the call active again, press A under Resume. 1 Press m. 2 Select Join. Calling 2 People All 3 people in the call can speak to and hear each other. Putting a Call on Hold, Making a Second Call 1 2 3 4 Place or receive a phone call.
Advanced Calling Features Creating Pauses and Waits While Dialing You can enter a pause or wait while dialing a number. For information on using pauses and waits, see “Creating Pauses and Waits” on page 34. To create a pause while dialing a phone number: 1 From the keypad, enter the digits you want to occur before the pause. 2 Press m. 3 Select Insert Pause. 4 Enter the digits you want to occur after the pause.
Setting Flip Actions Setting Flip Actions For Answering Calls To set your phone to answer calls when you open the flip: 1 From the main menu, select Settings > Phone Calls > Flip Activation > Flip to Ans. 2 Set this option to On. To set your phone not to answer calls when you open the flip: Set Flip to Ans to Off in step 2. For Ending Calls To set your phone to end calls when you close the flip: 1 From the main menu, select Settings > Phone Calls > Flip Activation > Flip to End. 2 Set this option to On.
Advanced Calling Features • Kbytes Reset — keeps a running total of the number of Kilobytes sent and received by your phone, until you reset it. Using Your Phone as a Modem To view or reset a timer: To use your phone as a modem with a laptop, handheld device, or desktop computer: 1 From the main menu, select Call Timers. 2 Select the feature you want to view or reset. 3 To view a feature without resetting: Press O when you are finished viewing. -or- 1 Open the connector cover.
Making TTY Calls 2 With the phone’s display facing up, insert a data cable’s connector into the accessory connector, until you hear a click. To use these services, you must install the iDEN Wireless Data Services software (available separately). For more information on setting up your computer and your i833 phone for packet and circuit data calls, refer to the Wireless Data Services User's Guide or contact SouthernLINC Wireless.
Advanced Calling Features TTY device features such as Turbo-Code, High-Speed, and Interruption are not supported by your phone. These features must be turned off or disabled to use your TTY device with your phone. Turning On the TTY Feature Your phone’s TTY feature must be on if you want to make TTY calls, set the TTY mode, or change the TTY baud rate. To make sure the TTY feature is on: From the main menu, select Settings > Phone Calls > TTY > Use TTY. This field must say On.
Making TTY Calls To change the TTY baud rate: 1 From the main menu, select Settings > Phone Calls > TTY > Baud. 2 Select the baud rate for your location.
Group Calls A group call is similar to an InstantLINC Mobile to Mobile call, but is made to all members of a Talkgroup at once. A Talkgroup is a predetermined group of SouthernLINC Wireless customers. Before you can make or receive group calls, a Talkgroup must be established. After the Talkgroup is established, you must join the Talkgroup. Joining a Talkgroup Your sales representative or SouthernLINC Wireless establishes Talkgroups for you and assigns each Talkgroup a Talkgroup number.
Turning off Group Calls To set your phone to let you hear group calls to your Talkgroup: Set Tkgrp Silent to Off in step 2.
Memo Memo lets you store a number, make a call to that number, and save it to Contacts. To create a memo: 1 From the main menu, select Memo. 2 Enter the number using your keypad. 3 Press O. To view the memo later: From the main menu, select Memo. To delete the memo: 1 From the main menu, select Memo. 2 Press and hold A under Delete. 3 Press O. To edit the memo: 1 From the main menu, select Memo. 2 Enter the new number. 3 Press O. To make a call to the memo number: 1 From the main menu, select Memo.
Ring Tones Setting Your Phone to Vibrate To set the ring tone your phone makes when you receive phone calls, call alerts, message notifications, or Datebook reminders: You can set your phone to vibrate instead of making a sound when you receive all phone calls, InstantLINC Mobile to Mobile calls, group calls, call alerts, message notifications, and Datebook reminders. 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off.
Ring Tones These icons indicate how the ringer is set. Q The phone always vibrates instead of making a sound. R The phone vibrates instead of making a sound for phone calls. u Group calls and InstantLINC Mobile to Mobile calls are heard through the earpiece, not the speaker. These icons may appear at the same time. Ring and Vibrate To set your phone to ring and vibrate when you receive phone calls or call alerts: 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off.
Downloading More Ring Tones Downloading More Ring Tones If you want to use other ring tones, you can download them into your phone for a fee. Go to http://www.southernlinc.com/downloads for a selection of custom ring tones and downloading instructions. Note: Ring tones purchased from this web site may be downloaded only once. If you delete a ring tone from your phone, you must purchase it again to download it again.
Entering Text Using Alpha Mode You can enter text, numbers, and symbols into your phone using Alpha, Word, Numeric, or Symbol text input modes. • Press any key on the keypad to enter the letters, numbers, and symbols on that key. For example, to enter the letter Y, press 9 three times. • Type a letter then scroll up to make that letter uppercase, or type a letter then scroll down to make that letter lowercase.
Special Function Keys The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing. 3 If the word that appears is not the desired word, press 0 to change the word on the display to the next most likely word in the database. Repeat until the desired word appears. 3 Select the language you want for your database. Special Function Keys Some of the phone’s keys assume different functions while in Alpha or Word mode.
Entering Text Punctuation Press 1 or 0 to insert punctuation. Continue to press the key to view the list of symbols available through that key. Pause to select the symbol you want. Note: Additional punctuation symbols are available in Symbols mode. Using Numeric Mode 1 Select Numeric as your text input mode. 2 Press the number buttons on your keypad to enter numbers. Using Symbols Mode 1 Select Symbols as your text input mode. A row of symbols appears along the bottom of the phone’s display.
Messages You can receive the following types of messages on your phone: • • • • Voice mail messages Text messages Net Alerts Fax mail You have 2 ways to access the messages you receive: • Respond to the message notification that appears when the message is received. • Dismiss the message notification and access the message later through the message center. You can listen to or view these messages, delete them, or continue to store them in the message center.
Messages Message Center The message center manages your messages. All your messages are stored in the message center. The message center shows how many messages you have of each type. To access your messages through the message center: 1 From the main menu, select Messages. 2 Scroll to the type of message you want to access. 3 Press O or press A under the display option on the left.
Voice Mail Messages Note: To receive voice mail messages, you must first set up a voice mail account with SouthernLINC Wireless. Receiving a Message When you receive a voice mail message, New Voice Mail Message appears on the display. Sending Unanswered Calls to Voice Mail To send a phone call to voice mail instead of answering it: If the flip is closed, press .. -orPress e. -orPress A under No. To call the SouthernLINC Wireless voice mail system and listen to the message: Press A under Call.
Text Messages Your phone can send and receive short messages and net alerts. Setting Up Before you begin using text messages, you may need to set up your signature, service center number, and expiration information: 1 2 3 4 5 From the main menu, select Messages. Scroll to Text Inbox. Press m. Select Text Msg Setup. Select Signature. Enter your signature. It may be up to 11 characters long. When you are finished, press O. 6 Select Srvc Cntr No. Enter the phone number of your service center.
Reading from the Message Center If your phone is powered off when you receive a text message, or net alert, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area. Tip: While reading a text and numeric message that contains a phone number, you can press s to call that number. Reading from the Message Center 1 From the main menu, select Messages > Text Inbox. 2 Select the message you want to read.
Text Messages To use a quick note: Press A under Browse. Scroll to the quick note you want. For more information on quick notes, see “Using Quick Notes”. When you are finished, press O. 4 If you want to send the message, press O or press A under Send. -orTo delete the message without sending it, press A under Cancel. -orIf you want to request confirmation of delivery, save the message as a draft, or set the sending method, press m. Select the option you want.
Creating and Sending Messages Using Drafts Deleting Sent Messages When you save a message as a draft, it is saved in the drafts folder. To delete a sent message: To edit a draft: 1 From the main menu, select Messages > Drafts. 2 Select the draft you want to edit. 3 To edit the fields you want to change, follow step 2 through step 4 in “Creating and Sending Messages” on page 59. Resending Messages To resend a message: 1 From the main menu, select Messages > Text Outbox.
Text Messages 4 Select Lock. Unlocking a Message 1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to lock or unlock. 3 Press A under Unlock. Sorting Messages You can sort messages in your inbox by sender, time and date, and status. You can sort messages in your outbox by recipient, time and date, and status. 1 From the main menu, select Messages > Text Inbox or Messages > Text Outbox. 2 Highlight any messages. 3 Press m. 4 Select Sort and Order.
My Info My Info lets you view information about your phone and send this information to other phones. Viewing My Info 1 From the main menu, select My Info. 2 Scroll to see the entire screen. The My Info screen contains: • My Name — You can enter your name here. • Line 1 and Line 2 — your phone numbers for phone lines 1 and 2. Each number appears when you receive your first call on that line. • LINC ID — Your LINC ID is the number that others use to contact you using InstantLINC Mobile to Mobile.
My Info You can also edit the information in Line 1, Line 2, and Ckt, but your changes are only temporary. The next time your phone registers on the network, your actual phone numbers and circuit data number appear again in My Info. Setting Sending Options Your phone can send information in My Info to other phones that have this capability.
Using LINC View LINC View lets you exchange My Info and contact information with other phones that have this capability. You do this through InstantLINC Mobile to Mobile calls. LINC View cannot be used during group calls. Sending My Info and Contact Information When you send My Info or contact information using LINC View, the information you sent appears on the display of the phone you are engaged in the InstantLINC Mobile to Mobile call with.
Using LINC View Sending Contact Information You can send contact information by selecting a Contacts entry or an item from the recent calls list. Contacts entries that contain only addresses cannot be sent. When Contacts entries are received, they do not include ring tones or pictures. 3 Select LINC View Contact. 4 Use the keypad to enter the LINC ID you want to send. -orPress A under Browse. Select Contacts, Recent Calls, or Memo. Select the number you want to enter.
Sending My Info and Contact Information Updating Contacts When you receive a call and see an icon next to the name of the person who called you, you can update the contact for that person. To update the contact: 1 When you see an icon next to a contact, press m. 2 Select Update Contacts. 3 Press O.
Datebook Datebook stores up to 250 events. You can store events over a 13 month period — 12 months after and 1 month before the current date. A Datebook event contains: • A subject — A name you assign to the event. You can also enter a phone number, LINC ID, or Talkgroup number here. After the event is stored, you can call this number from Datebook or when you get a reminder of this event. • A location — The location of the event. You can also enter a phone number, LINC ID, or Talkgroup number here.
Creating Events To view an event: Creating Events 1 Select the day the event occurs. 2 Select the event. Every Datebook event must have a subject and be stored to a date. Other information is optional. To change the current view: You may enter the information in any order by scrolling through the event details. 1 While viewing Datebook, press m. 2 Select the view you want. Navigating Datebook After you have entered the information you want, you can press A under Done to store the event to Datebook.
Datebook 3 If you want to assign a location to the event: 7 If you want to make the event a recurring event: Select Location. Select Repeat. Enter the location. -or- Select the repeat cycle you want. Enter a phone number, LINC ID, or Talkgroup number. After the event is stored, you can call this number. If the event occurs more than once a week: Select Multiple Day. Select the days you want. When you are finished, press O.
Editing Events Assigning More Options Editing Events To assign more options before storing an event: To change the details of an event: 1 If you have created a reminder for the event and want to set the ring tone for that reminder: 1 2 3 4 Select Ring Tone. Select the ring tone you want from the ring tones stored in your phone. 2 If you want to assign a profile that your phone is switched to while the event is occurring: Select Profile.
Datebook 5 If the event is not a recurring event, press O or press A under Yes to confirm. -orIf the event is a recurring event: Select This Event Only to delete only the event selected in step 2. Select Repeat Event to delete all occurrences of the event. Receiving Reminders If you created a reminder for a Datebook event, when the reminder time occurs, your phone notifies you with text on the display and a reminder tone. To view more details about the event: Open the flip. -orPress A under View.
Making Calls From Datebook Making Calls From Datebook Press and hold the PTT button on the side of your phone. -or- If you stored a phone number, LINC ID, or Talkgroup number in the Subject or Location field of a Datebook event, you can call or send a call alert to that number from Datebook. If you did not include a # before the Talkgroup you want to call: Press m. Select Talkgroup.
Datebook • Alert Timeout — sets the amount of time a tone continues to sound when you receive a Datebook reminder. • Clock — controls whether the time and date appear on the idle screen; sets time and date format; sets year.
Java Applications 2 If you have selected a suite of applications, select the application you want to run. Your phone arrives with Java applications loaded and ready to install. You can download and install more Java applications. To run an application that does not have a shortcut on the main menu: Note: Using Java applications may cause your phone to use up more battery power than other uses of your phone. Installing Applications 1 From the main menu, select Java Apps.
Java Applications Resuming Applications You can resume a suspended application at any time. This brings it to the foreground. 6 If you want to end all applications without letting them exit, press A under EndNow. Downloading Applications 1 From the Java menu, select Suspended Apps. 2 Select the application you want to resume. If you want to run more Java applications, you can download them into your phone. Ending Applications Go to http://www.southernlinc.
Managing Memory 5 Press O or press A under Yes to confirm. Managing Memory To view the amount of memory available for Java applications: 1 From the main menu, select Java Apps > Java System. 2 Press A under Next. 3 To see more memory information, press A under Next again. Deleting Java applications frees memory. Note: Java application data is stored in your phone using the same memory space used to store messages, voice records, pictures, ring tones, and wallpaper images.
Java Applications 4 Press O. 5 Press A under Done. Java Applications and GPS Enabled Some Java applications can make use of your phone’s GPS feature to determine the approximate geographical location of your phone. (See “GPS Enabled” on page 81 for more information on the GPS feature.) However, for privacy reasons, you may not always want Java applications to access the location of your phone.
Java Applications and GPS Enabled To deny this request: 1 Press A under Deny. The application does not access the location of your phone. 2 Select the denying option you want: • Always — If the application requests access to the location of your phone again, the request is denied without notifying you. • For this session — If the application requests access to the location of your phone again before you power off your phone, the request is denied without notifying you.
Java Applications • Never — When the application requests access to the location of your phone, the request is denied without notifying you.
GPS Enabled Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.
GPS Enabled • When your GPS antenna is covered (for example, by your hand or other object) or facing the ground • In temperature extremes outside the operating limits of your phone Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate.
Viewing Your Approximate Location GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center. In some cases, your local 911 emergency response center may not be equipped to receive GPS location information.
GPS Enabled • The number of satellites used to calculate the location. In general, more satellites make for better accuracy. To calculate your location again: Press A under Refresh. It may take your phone several minutes to complete the process of determining your location. During this time, a message usually appears on your phone’s display saying your phone is scanning for satellites. For tips on getting the best location calculation, see “Enhancing GPS Performance”.
Enhancing GPS Performance To improve accuracy and increase your chances of a successful calculation, do the following while your phone is determining your approximate location: • Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage. While performance in a building is improved by moving closer to windows, glass with certain sun shielding films may block satellite signals.
GPS Enabled • Stand still. If possible, stand still until your phone is finished determining your location. Moving your phone at a walking pace while your phone is calculating your approximate location may substantially decrease GPS performance. • In a car. When using the GPS Enabled feature in a car, position your phone so that the GPS antenna has good access to GPS signals through the car’s windows. Typically, the GPS antenna has best access to GPS signals in a car when placed near a window.
Using GPS with Map Software When you receive your phone, the GPS security feature is turned off, so you do not have to enter a GPS PIN to access your GPS privacy options. If you turn this feature on, you will be required to enter a GPS PIN to access your GPS privacy options. To turn the GPS Enabled security feature on or off: 1 From the main menu, select Settings > Security > GPS PIN. 2 Select On or Off. 3 Enter the current GPS PIN. Note: When you receive your phone, your GPS PIN is 0000.
GPS Enabled Software Compatibility Your phone sends location information to your laptop or other device using the standard National Marine Electronics Association (NMEA) format. Your phone supports output messages in NMEA-0183 format and supports the following NMEA-0183 sentences: GGA, GLL, GSA, GSV, RMC, and VTG. 2 With the phone’s display facing up, insert the data cable’s connector into the accessory connector, until you hear a click.
Using GPS with Map Software • Flow control: Hardware To set your phone to send location information to your laptop or other device: 1 From the main menu, select GPS > Interface. 2 Set NMEA OUT to On. Your phone is now sending location data to your laptop or other device. To stop your phone from sending location data to your laptop or other device: Set NMEA OUT to Off. Each time you power your phone on, NMEA OUT is automatically set to Off.
Voice Records A voice record is a recording you make with your phone and can play back. You can record notes to yourself or phone calls. Your phone can store up to 20 voice records. Creating Voice Records To record a note to yourself: 1 From the main menu, select VoiceRecord > [New VoiceRec]. 2 Say the message you want to record into the microphone. Tip: To stop recording before you are finished, press A under Pause. To start recording again, press A under Resume.
Deleting Voice Records 5 Press O. Deleting Voice Records To delete a voice record: 1 From the main menu, select VoiceRecord. 2 Scroll to the unlocked voice record you want to delete. 3 Press m. 4 Select Delete. 5 Press O or A under Yes to confirm. To delete all voice records: 1 2 3 4 5 From the main menu, select VoiceRecord. Scroll to any voice record. Press m. Select Delete All. Press O or A under Yes to confirm.
Customizing Your Phone Setting the Volume Of the Earpiece and Speaker 1 From the main menu, select Settings > Volume. 2 Scroll to Earpiece to set the earpiece volume. -orScroll to Speaker to set the speaker volume. 3 To set the volume: Scroll left or right. -orPress the volume controls. Of the Ringer Press the volume controls.
Changing the Look of Your Phone Setting Wallpaper to Change Automatically 1 From the main menu, select Settings > Display/Info > Wallpaper > Auto Cycle. 2 Select how often you want the wallpaper to change. Any of the wallpapers in your phone may appear on your idle screen. Deleting a Wallpaper 1 From the main menu, select Settings > Display/Info > Wallpaper > Wallpaper. 2 Select the wallpaper you want to delete. 3 Press m. 4 Select Delete. 5 Press O. 6 Press A under Yes.
Customizing Your Phone To choose large icons, select Icon View. Setting the Backlight A backlight lights the display and keypad when you make or receive a call, open or close the flip, or press keys or buttons. To control how long the backlight stays on: 1 From the main menu, select Settings > Display/Info > Backlight > Backlight. 2 Select the number of seconds you want the backlight to stay on. -orSelect Off if you never want the backlight on.
Using Settings Display/Info Features Phone Calls Features The Display/Info menu controls how the keypad and display appear: The Phone Calls menu controls how your phone handles phone calls: • Wallpaper — changes the wallpaper that appears on the idle screen. • Palette — changes the color scheme of the display. • Text Size — sets size of text on the display. • Home Icons — controls whether main menu icons appear on the idle screen. • Backlight — controls backlight illumination.
Customizing Your Phone • Java App Control — If you have installed a Java application that answers phone calls, this setting lets you turn that application on. InstantLINC Mobile to Mobile Features The InstantLINC Mobile to Mobile menu controls how your phone handles InstantLINC Mobile to Mobile calls and group calls: • Tkgrp Silent — controls whether you hear group calls to your Talkgroup. See “Turning off Group Calls” on page 46. • Tkgrp Area — lets you define your Talkgroup area.
Using Settings • Power Up — sets the main menu item you see when you power on your phone. To set the idle screen to be the first thing you see when you power on your phone, select Default Ready. Security Features Volume Features • Phone Lock — turns on a feature that locks your phone: Lock Now takes effect immediately; Auto Lock takes effect when your phone is powered off and then on. An unlock code is required to enable this feature, to unlock the phone, and to set a new unlock code.
Customizing Your Phone Advanced Features The Advanced menu contains advanced and rarely used Settings features. • Alert Timeout — sets the amount of time a tone continues to sound when you receive a message notification, call alert, or Datebook reminder. • Headset/Spkr — sets headset option. See “Using a Headset” on page 105. • Disco Lights — sets the lights in the external display to light up when a musical ring tone sounds.
Profiles Viewing Profiles A profile is a group of settings saved together so that you can apply them to your phone easily. To view the profiles stored in your phone: A profile contains these settings: • Ring Tones — sets all options described in “Ring Tones” on page 49, except assigning ring tones to Contacts. • Display/Info — sets Wallpaper, Color Palette, Text Size, and Backlight options. See “Display/Info Features” on page 95. • Phone Calls — sets Set Line and Auto Ans options.
Profiles When you do this, your phone either: • Updates the profile in effect to reflect these changes, without notifying you -or• Creates a temporary profile that contains these changes To set your phone to create a temporary profile that contains changes you make to settings: 1 2 3 4 From the main menu, select Profiles. Press m. Select Setup > Temp Profile. Set this option to On.
Creating Profiles 4 Select Store Changes. The temporary profile is stored with the name of the profile it is based on. The profile it is based on, as it existed before you made changes to settings, is gone. Creating Profiles 1 From the main menu, select Profiles. 2 Select [New Profile]. -orScroll to any profile. Press m. Select New. 3 Enter the name you want to give the profile. When you are finished, press O. 4 If you want to base this profile on an existing profile: Select Copy from.
Profiles Setting Call Filtering The call filtering setting in each profile lets you control which calls, call alerts, and message notifications your phone notifies you of, and which it ignores. To set call filtering: 1 While setting options for a profile, select Call Filter. 2 To set filtering options for phone calls, select Phone. • Off sets your phone to notify you of all phone calls. • All sets your phone to ignore all phone calls.
Shortcuts Shortcuts lets you access most menu options by pressing a number on your keypad (1 through 9) or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time. Creating a Shortcut Note: When you receive your phone, all number keys may already be assigned to shortcuts. If this is the case, you can create new shortcuts by deleting or replacing existing shortcuts. 1 Go to the menu item you want to create a shortcut for.
Shortcuts If you assigned a voice name to the shortcut: Press and hold t. Say the voice name into your phone. The shortcut with that voice name is then highlighted. 3 Press O. Editing a Shortcut To change the number assigned to a shortcut: 1 2 3 4 5 6 From the main menu, select Shortcuts. With any shortcut highlighted, press m. Select Reorder. Scroll to the shortcut you want to move. Press A under Grab. Scroll to the place where you want the shortcut to appear. 7 Press A under Insert.
Using a Headset If you use a headset or similar device with your phone, you can set your phone to send incoming sound to the headset only, or to the headset and the speaker at the same time: 1 From the main menu, select Settings > Advanced > Headset/Spkr. 2 Select HdsetOnly to send incoming sound to the headset only. -orSelect Hdset&Spkr to send incoming sound to the headset and ring tones to the speaker.
Understanding Status Messages You may receive status messages under certain conditions. Before contacting SouthernLINC Wireless Customer Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes status messages. Note: When your flip is closed, the internal display screen shows a shortened version of the status message displayed in the external screen. To see complete status messages, open the flip.
Status Messages (external display) Status Messages (internal display) Message Description Status Messages (external display) Try Again Please Try Again An error occurred. Please try again. Wrong PIN You have entered an incorrect PIN number. PIN Blocked PIN Blocked Call Your Provider Please Enter Special Code You have inserted a SIM card that will not work with a SouthernLINC Wireless phone. Contact Customer Care if you believe this is a valid SIM card.
Understanding Status Messages Status Messages (external display) Status Messages (internal display) Message Description Scanning for Satellites Searching for GPS satellites. Unable to Locate Sats Could not find GPS satellites. Technical Error A problem occurred in your phone’s GPS circuitry. If this error occurs, contact Customer Care.
Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR INTEGRATED MULTI-SERVICE PORTABLE RADIO. RF Operational Characteristics Your radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network.
Safety and General Information To assure optimal radio product performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures: Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone.
Portable Radio Product Operation and EME Exposure ALL MODELS WITH FCC ID AZ489FT5828 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Safety and General Information Antenna Care Facilities Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the radio product and may violate FCC regulations. To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.
Operational Warnings • Should turn the phone OFF inmediately if there is any reason to suspect that the interference is taking place. • Should read and follow the directions from the manufacturer of the implantable medical device. If you have any questions about using your wireless phone with such a device, consult your health care provider. For more information, see www.fcc.cellphones.gov Use While Driving Check the laws and regulations on the use of radio products in the area where you drive.
Safety and General Information as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.
Accessory Safety Information 2 Remove Battery and SIM card (if so equipped) from radio product. 3 Shake excess liquid from radio product. 4 Place the radio product and battery in an area that is at room temperature and has good air flow. 5 Let the radio product, battery, and SIM card dry for 72 hours before reconnecting the battery and/or powering on the radio product. If the radio product does not work after following the steps listed above, contact your dealer for servicing information.
Safety and General Information • Use of a non-recommended attachment to a battery charger may result in a risk of fire, electric shock, or injury to persons. • Make sure the battery charger power cord is located so that it will not be stepped on, tripped over, or subjected to damage or stress. • An extension cord should not be used with any battery charger unless absolutely necessary. Use of an improper extension cord could result in a risk of fire and electric shock.
California Perchlorate Label Some mobile phones use an internal, permanent backup battery on the printed circuit board that may contain very small amounts of perchlorate. In such cases, California law requires the following label: “Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.” There is no special handling required by consumer.
Hearing Aid Compatibility Hearing Aid Compatibility A number of Motorola phones have been tested for hearing aid compatibility. When some wireless phones are used with certain hearing aids, users may detect a noise which can interfere with the effectiveness of the hearing aid. Some hearing aids are more “immune” than others to this interference noise, and phones can also vary in the amount of interference noise they may generate. ANSI standard C63.
• Any combined rating equal to or greater than six offers excellent use. • Any combined rating equal to five is considered normal use. • Any combined rating equal to four is considered usable. Thus, if you use an M3 phone with a M3 hearing aid you will have a combined rating of six for “excellent use.” This methodology applies equally for T ratings. More information about hearing aid compatibility may be found at: www.motorola.com/accessibility, www.fcc.gov, www.fda.gov, and www.hearingloss.
MOTOROLA LIMITED WARRANTY Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES AND SOFTWARE PURCHASED IN THE UNITED STATES OR CANADA PRODUCTS COVERED LENGTH OF COVERAGE Products as defined above. One (1) year from the date of purchase by the first consumer purchaser of the product. Accessories as defined above. One (1) year from the date of purchase by the first consumer purchaser of the product. What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc.
What is not covered? (Exclusions) Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Ornamental Decorations. Ornamental decorations such as emblems, graphics, rhinestones, jewels, gemstones and their settings, and other decorative elements, are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty.
MOTOROLA LIMITED WARRANTY Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected.
THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED.
Patent and Trademark Information MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2007 Motorola, Inc. All rights reserved. Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation. T9 is a trademark owned by Tegic Communications. T9® Text Input Patent and Trademark Information This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat.
Index Numerics 3-way calling 39 A Accessories 16 safety 115 Airplane mode power button 7 status icon 11 turning on and off 94 Alpha mode 52 Antenna 15 B Backlight 94, 95 Battery care 6 charging 5, 6 door 3 inserting 4 safety 114 Baud rate 98 C Call alerts 23 deleting 24 queue 23 receiving 23 responding 23, 24 sending 23 sorting 24 viewing 24 Call filtering 102 Call forwarding 36 all calls 36 missed calls 37 off 36 Call Timers 41 Call Waiting 38 off 38 Calls 3-way 39 answering automatically 95 answering w
Index sending 65 Contacts 19, 30 capacity 34 creating entries 32 deleting 34 icons 30 iDEN Phonebook Manager 35 international numbers 35 searching 31 showing all entries 31 showing only LINC IDs 31 SIM card 30 storing from idle screen 33 storing from Memo 48 storing from recent calls 27 type 30 viewing 31 voice name 33 with non-i833 phones 35 D Datebook 20 profiles 71 Display 126 backlight 94, 95 contrast 93, 95 options 9 screen 9 Drafts 61 see also text messages, drafts viewing location 83 GPS PIN 97 GP
storing 35 J Java applications deleting 76 memory 77, 91 K Keypad 2 locking 97 L Language 95 LINC View 65 LINC View Contact 65 LINC View My Info 65 Lists, see menus M Memo 48 calling from 48 creating 48 editing 48 storing to Contacts 48 viewing 48 Memory Java applications 77, 91 ring tones 51 text messages 62 voice records 91 Menu key 2, 10 Menus 9 context-sensitive 2, 10 main menu 10 Message center 55, 57 see also messages text messages 59 Message notifications 55 setting options 55 Messages 55 see al
Index changing settings 99 creating 101 Datebook 71 deleting 101 editing 101 switching 99 temporary 100 viewing 99 Programming, over-the-air 8 PTT One Touch 21 One Touch, setting 40 PUK code 13 Q Quick notes 60 see also text messages, Quick notes R Radio frequency 109 Recent calls 19, 25, 28 call alerts 25 contact information 26 creating text messages 60 deleting 27 128 display time 98 storing to Contacts 27 viewing 26 Redialing 20, 95 Ring tones 30, 49 deleting 51 downloading 51 memory 51 off 49 setting
T T9 Text Input, see text entry Talkgroups 46, 96 joining 46 Text display area 9 Text entry 52 Alpha mode 52 database 52, 53 icons 52 mode 52 Numeric mode 54 Symbols mode 54 Word mode 52 Text messages 55, 58 creating 59 deleting 61, 62 drafts 61 memory 62 message center 59 receiving 58 sending 59 sent messages 61 setting up 58 sorting 62 text messages quick notes 60 Trademark information vii, 124 TTY calls 43 baud rate 44 making 43 mode 44 on 44 Turbo Dial 20 W Waits dialing 40 storing 34 Word mode 52 V
