Motorola iDEN i830 Handset User’s Guide
Contents Getting Started........................................... 1 Battery ............................................................. 3 Activating your Mike Account........................... 6 Powering On and Off ....................................... 6 Finding Your Number....................................... 7 Handset Basics ................................................ 8 Locating Your SIM Card ................................ 12 SIM Card Security..........................................
Turning Off Call Forwarding........................... 39 Forwarding Missed Calls ............................... 39 Calling 2 People............................................. 40 Creating Pauses and Waits While Dialing ..... 41 Making International Calls ............................. 41 Setting Flip Actions ........................................ 41 Call Timers..................................................... 42 Entering Text............................................ 43 Using Alpha Mode .........
Deleting Events.............................................. 66 Receiving Reminders..................................... 67 Making Calls From Datebook ........................ 67 Customizing Datebook Setup ........................ 68 Java Applications .................................... 69 Installing Applications .................................... 69 Running Applications ..................................... 69 Suspending Applications ............................... 69 Resuming Applications ...........
Switching Profiles .......................................... 95 How Changing Settings Affects Profiles ........ 95 Temporary Profiles ........................................ 96 Creating Profiles ............................................ 97 Editing Profiles ............................................... 97 Deleting Profiles............................................. 97 Setting Call Filtering....................................... 98 Understanding Status Messages ...........
DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i830 Model Number: H74XAH6RR4AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.
vi
Getting Started volume controls light sensor Push-To-Talk (PTT) button audio jack speaker (in back) microphone accessory connector 1
Getting Started p Power button. Navigation key — press the arrows to scroll through menus and lists. 2 O OK Key — selects highlighted item; places and answers calls. m Menu Key — accesses context-sensitive menus. A Option Key — selects the option appearing above it on the display. s Send Key — places phone calls. e End Key — ends phone calls; returns to idle screen. t Speakerphone Key — acts like s when the flip is closed; turns speakerphone on; used with voice names and voice records. .
Battery Battery Inserting the Battery Removing the Battery Door 1 Remove the battery door. 2 Insert the battery into the battery area. Press the battery down to secure it. 1 Make sure the handset is powered off. 2 Press the release button and pull the battery door away from the handset.
Getting Started 3 To replace the battery door, locate the tabs on the battery door and the slots in the phone. 2 Open the connector cover. connector cover slots tabs 3 Plug the other end of the charger into the accessory connector. 4 Place the tabs on the battery door into the slots on the phone. Charging the Battery Your handset comes with a battery charger. 1 Plug the charger into an electrical outlet.
Battery 4 When charging the battery for the first time, charge for 30 minutes longer than the time shown in “Charging Times”. 2 Remove the battery by lifting it out from the side. Charging Times See your battery and charger to determine the appropriate charging time. Battery Charger Rapid Slim SC Mid-Rate 2 hours 3 hours High 2 hours Performance SC 4 hours For best results, charge the batteries within the temperature range of 50°F to 104°F (10°C to 40°C). Prolonged charging is not recommended.
Getting Started • Lithium Ion batteries have a self discharge rate and without use, lose about 1% of their charge per day. • The battery capacity is degraded if the battery is stored for long periods while fully charged. If long term storage is required, store at half capacity. Activating your Mike Account Before you can begin using your i830 handset, you need to activate your Subscriber Identity Module (SIM) card on The Mike Network.
Finding Your Number As your handset connects to the network, you will see a welcome message and a connecting message. When the idle screen appears, the handset is ready to use. TELUS Finding Your Number My Info lets you view your phone number, Private ID, and other handset information: 1 2 3 4 Press m to access the main menu. Scroll to My Info. Press O. Scroll to see your information: • Name — Enter your name. See “Entering Text” on page 43.
Getting Started Customizing Features You can control many features of your handset, including the size of the text on the display, the way you access main menu items, and the volume of incoming sound, rings, and other tones. See “Customizing Your Handset” on page 89. Tip: To see a one-line idle screen when your handset closed is closed, press .. Text Area This area displays menus, messages, names, phone numbers, and other information.
Handset Basics 4 Press O to see the Security screen. Main Menu OK Key All your handset’s features can be accessed through the main menu. You can set the main menu to appear as a list or as large icons (see “Large Dialing” on page 92). Pressing O: • • • • Selects the highlighted menu item or list item Sets options Confirms actions Places and answer calls a Browser Browse Mike’s Wireless Web Services. q Java Apps Java applications on your handset. See “Java Applications” on page 69.
Getting Started j My Info View personal handset information, including phone number and Private ID. See page 7. l GPS Find your approximate geographical location. See page 76. d Contacts View, store, edit contacts. See page 31. new contact form list of contacts Contacts menu e Messages Voice Mail Test Msgs Fax Mail Outbox Drafts Net Alert Access messages. See page 47. Set call forwarding options. See page 37. o Datebook Schedule appointments. See page 63. g Memo Store a number to access later.
Handset Basics Status Icons G J H K I L Call Forward — Your handset is set to forward calls. See “Call Forwarding” on page 37. u M Q Ringer Off — Your handset is set not to ring. See “Setting Your Handset to Vibrate” on page 89. w x T y Messages — You have one or more messages. See “Messages” on page 47. to the antenna indicate a stronger signal. D Internet — You are ready to browse the internet. A Phone In Use — Your handset is active on a phone call.
Getting Started Locating Your SIM Card Your SIM (Subscriber Identity Module) card is a small piece of plastic located in the SIM card holder in the back of your handset, underneath the battery. Note: Except for making emergency calls, your handset will not function without the SIM card. To prevent unauthorized use of your handset, your SIM card can be protected by a PIN that you enter each time the handset is powered on. You can change the PIN or turn off the requirement that it be entered.
SIM Card Security Changing the PIN 1 From the main menu, select Settings > Security > Change Password > SIM PIN. 2 At the Enter Old SIM PIN screen, enter the current SIM PIN. 3 Press A under Ok. 4 At the Enter New SIM PIN screen, enter the new 4- to 8-digit SIM PIN. 5 Press A under Ok. 6 At the Re-enter New SIM PIN screen, re-enter the new SIM PIN to confirm. 7 Press A under Ok.
Getting Started 2 At yourTELUS Mobility representative’s request, provide the information needed to give you a PUK code. 3 Select Unblock PIN. 4 Enter the PUK code. 5 Enter a new 4- to 8-digit SIM PIN. 6 Re-enter your SIM PIN. • • • • • • If you entered the codes properly, SIM Unlocked appears on the display. Inserting Your SIM Card Inserting and Removing Your SIM Card Important: Do not touch the gold-colored areas of your SIM card.
SIM Card Security 3 Carefully slide your SIM card into the SIM card holder. Removing Your SIM Card Important: To avoid loss or damage, do not remove your SIM card from your handset unless absolutely necessary. 1 With your handset powered off, remove the back cover and battery. See “Removing the Battery” on page 5. 2 Open the SIM card holder. 4 Close the SIM card holder.
Getting Started 3 Carefully slide your SIM card out of the SIM card holder. Note: Protect your SIM card as you would any delicate object. Store it carefully. Accessories Your handset comes with a battery, a charger, and a carry holster. To order additional accessories, log on to our Web site at www.telusmobility.com or contact your Mike Dealer. For More Information If you have questions about your i830 handset, contact your Mike Dealer or TELUS Mobility Client Care. 4 Close the SIM card holder.
Mike’s Direct Connect Service There are two ways of communicating over Mike’s Direct Connect service: • one-to-one using a private call • one-to-many in a group call Both of these methods are very similar to two-way radio, and at a fraction of the cost of traditional cellular. Mike’s Direct Connect also offers the Call Alert feature, which gives recipients a notice, similar to a ringer, that you would like to speak to them.
Mike’s Direct Connect Service From the Recent Calls List The recent calls list stores the last 20 calls you made or received. With the Contacts type field highlighted, scroll left or right to display the Contacts type for the number you want to call. To select a Private ID from the recent calls list as the number you want to call: If you are making a Private call, your phone places the call to the Private ID stored in the Contacts entry, even if the Private ID icon is not displayed.
One Touch PTT Release the PTT button to listen. One Touch PTT One Touch PTT sets your phone to call the most recent Private ID on the recent calls list, or to a Private ID you choose, every time you press the PTT button. See “Setting One Touch PTT” below. Enter the number using your keypad. -orPress A under Search. Select Contacts, Recent Calls, or Memo. Enter the number from Contacts, the recent calls list, or Memo, as you would when making a call.
Mike’s Direct Connect Service • Clear — dismiss and delete the call alert Viewing Date and Time Sending Call Alerts To view the date and time a call alert was received: 1 Enter the Private ID you want to send to, as you would when making a Private call. 2 Press A under Alert. Ready to Alert appears on the display. 3 Press the PTT button until Alert Successful appears on the display.
One-to-Many Group Calls Note: Answering a call alert from the recent call list does not remove it from the call alert queue. Deleting Call Alerts To delete a call alert from the queue: 1 From the call alert queue, scroll to the call alert you want to delete. 2 Press m. 3 Select Delete. 4 Press A under Yes to confirm. To delete all call alerts from the queue: 1 From the call alert queue, press m. 2 From the call alert menu, select Delete All. 3 Press A under Yes to confirm.
Mike’s Direct Connect Service Making Group Calls 1 Press #. Then enter the Talkgroup number using the keypad. -orChoose the Talkgroup name from Contacts or recent calls list. 2 Proceed as if making a Private call. Receiving Group Calls To answer a group call: Proceed as if answering a Private call. Only one person at a time may speak on a group call. Turning off Group Calls To control whether you hear group calls to your Talkgroup: 1 From the main menu, select Settings > 2-Way Radio > Tkgrp Silent.
Making Phone Calls Receiving Phone Calls To make a phone call: When you receive a phone call, your handset rings, vibrates, or lights up its backlight. With the Flip Open 1 Enter the number you want to call. 2 To place the call: Press s. -orIf you entered the number from the idle screen, press O. 3 To end the call: Press e. -orClose the flip. To end a call by closing the flip, you must have the Flip to End feature turned on (see “Setting Flip Actions” on page 41.
Making Phone Calls Press e. -orClose the flip. -or- Call Icons When you make a phone call, call icons appear in the text area of the handset’s display. X Placing a phone call. W Receiving a phone call. Y Phone call is active. Z Phone call is on hold. U Phone call ended. When you miss a call, this icon appears in the text area: V You missed a phone call.
Entering the Number to Call 2 To view the rest of the recent calls list, press the volume keys on the side of your handset. 3 You can call the number displayed by pressing t on top of the phone. From Contacts If you have numbers stored in Contacts, you can use these numbers to make calls. For information on entering numbers into Contacts, see “Creating Entries” on page 33. 1 From the main menu, select Contacts. 2 Scroll to the name or number you want to call.
Making Phone Calls Using a Voice Name If you have created a voice name in Contacts for the number you want to call, say the voice name into your to enter the number. See page 32 for information on voice names. You can use a voice name to enter a handset number with the flip open or closed. 1 Press and hold t until a prompt appears telling you to say the voice name. 2 Speaking into the microphone, say the voice name assigned to the number you want to call. Your handset plays the name back to you.
Using Speakerphone You can now call the most recent call, or view the rest of the recent call list. unknown numbers will not be shown in the recent calls list. See page 24 for more information. Using Speakerphone Turning on speakerphone makes incoming sound come out of the phone’s speaker instead of the earpiece. Speakerphone is available whenever you are on an active phone call. With the Flip Open To turn speakerphone on or off: Press A under Speaker. -orPress t.
28
Recent Calls The recent calls list stores the numbers of the 20 most recent calls you have made and received. If the number of a recent call is stored in Contacts, the name associated with the number appears on the recent calls list. An icon appears beside the name or number indicating the Contacts type of the number used in the call. See “Contacts” on page 31. For phone calls, an icon appears to the left of the name or number giving more information about the call: X A call you made.
Recent Calls 2 Press A under Store. -orIf Store is not one of your options: Press m. Select Store. Tip: If Store is not on this menu, the number is already stored in Contacts. 3 To store the number as a new entry, select [New Contact]. -orTo store the number to an existing entry, select the entry. 4 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number. For information on Contacts types, see page 31.
Contacts Each Contacts entry can store several numbers or addresses. Depending on the type of Mike’s Smart Card you use, you will be able to store different numbers of contacts and contact information. Information stored in Contacts is saved on your SIM card. If you move your SIM card to another SIM-based handset, you can access information stored in Contacts from that handset.
Contacts Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See “Creating Pauses and Waits” on page 35. • A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it. • A voice name — If you create a voice name for a number, you can then dial that number by saying the voice name into your handset.
Creating Entries 3 Set this option to Show All. Creating Entries A number or address and a Contacts type are required for all Contacts entries. Other information is optional. You may enter the information in any order by scrolling through the entry details. After you have entered the number or address, Contacts type, and any other information you want, you can press A under Done to save the entry to Contacts. To cancel a Contacts entry at any time press, e to return to the idle screen.
Contacts Enter the additional information for the entry using step 2 through step 6. You must assign a name to the entry, if you have not already. 8 Press A under Done. Assigning Options 1 If you have not already, select [Options]. 2 The default Speed Dial number assigned to a phone number is displayed in the Speed # field. This is always the next available Speed Dial location. If you want to assign the phone number to a different Speed Dial location: With the Speed # field highlighted, press O.
Editing Entries Editing Entries 1 From the Contacts list, scroll to the entry you want to edit. 2 Press A under Edit. -orIf Edit is not one of your options: Press m. Select Edit. The entry details screen displays. 3 Follow the applicable instructions in “Creating Entries” on page 33 to edit the various fields. Deleting Entries Delete an Entry 1 From the Contacts list, scroll to the entry you want to delete. 2 Press m. 3 To delete the entire entry, select Delete Contact.
Contacts If you want a pause longer than 3 seconds, press and hold * more than once. Each P represents a 3-second pause. To program a wait: Press and hold * until the letter W appears. The W means your handset waits before dialing further. If you store 17035551235W1234, when you select this number and make a call, your dials the first 11 digits and then waits. A message appears asking if you want to send the rest of the digits. Press A under Yes to dial the last 4 digits.
Advanced Calling Features Call Waiting Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. If you are on a call and receive a second call, your handset emits a tone and displays a message saying you are receiving a second call. To accept the second call and put the active call on hold: Press A under Yes. To accept the second call and end the active call: 1 Press e. Your handset rings with the second call.
Advanced Calling Features Putting a Call on Hold J Phone line 2 is active; calls to phone line 1 are 1 While on an active call, press m. 2 Select Hold. K Phone line 2 is active; calls to phone line 2 are If you want to make the call active again, press A under Resume. L Phone line 2 is active; calls to phone lines 1 Call Forwarding Call forwarding sends calls to the phone numbers you specify.
Turning Off Call Forwarding Turning Off Call Forwarding If you don’t want all your calls forwarded, turn the feature off: 1 From the main menu, select Call Forward > To. 2 Set this option to Off. All your calls are now sent to your handset. Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voice mail. Note: To receive voice mail messages, you must first set up a voice mail account with TELUS Mobility Client Care.
Advanced Calling Features Note: Your handset comes pre-programmed to detailed forward to Mike’s Voice Mail. If you change your detailed call forwarding, remember to reset the forwarding back to your access number or your phone number. 2 While the call is active, press m. 3 Select 3 Way. This puts the call on hold. 4 Enter the second phone number you want to call. Tip: For quick ways to enter the number, press m. Calling 2 People 5 Press O or press s to place the call. 6 Press A under Join.
Creating Pauses and Waits While Dialing Creating Pauses and Waits While Dialing You can enter a pause or wait while dialing a number. For more information on pauses and waits, see “Creating Pauses and Waits” on page 35. To create a pause while dialing a phone number: 1 From the keypad, enter the digits you want to occur before the pause. 2 Press m. 3 Select Insert Pause. 4 Enter the digits you want to occur after the pause.
Advanced Calling Features To set your handset not to answer calls when you open the flip: Set Flip to End to Off in step 2. Note: If you are using your handset with a headset, and you have the Flip to End option set to On, closing your flip sends incoming sound to the headset and does not end the call.
Entering Text You can enter text into your handset using the traditional method of pressing a key several times for each character, or by pressing a key once for each letter while words likely to be the one you want are chosen from a database. You can also enter symbols and numbers into a text field. To choose a text input mode: 1 At a screen that requires you to enter text, press m. 2 Select the text input mode you want to use. A checkmark appears next to the current mode.
Entering Text 2 Type a word by pressing one key for each letter. Choosing a Language For example, to type “test” press 8 3 7 8. To change the language of the database: The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing. 1 At a screen that requires you to enter text, press m. 2 Select Languages. 3 Select the language you want for your database.
Using Numeric Mode When neither of these icons appear, letters typed are lowercase. Scrolling up after typing a letter makes that letter uppercase. Note: Your handset automatically makes the first letter of a sentence uppercase. Punctuation Press 1 or 0 to insert punctuation. Continue to press the key to view the list of symbols available through that key. Pause to select the symbol you want. Note: Additional punctuation symbols are available in Symbols mode.
46
Messages If you are on a call when you receive a message, your phone may sound a notification tone during the call or after you end the call, depending on how you set your notification options. To access your voice mail messages, text and numeric messages, Net alerts, and any other types of messages you are able to receive, go to the message center: Setting Notification Options 1 From the idle screen, press A under Mesg.
Messages When you receive a voice mail message, New Voice Mail Message appears on the display. To call TELUS Mobility voice mail system and listen to the message: Press A under Call. To dismiss the message notification: If the flip is closed, press .. -orIf the flip is open, press O or press A under Back. This icon y appears on the display, reminding you that you have a new message. Sending Unanswered Calls to Voice Mail To send a phone call to voice mail instead of answering it: Press e.
Text and Numeric Messages Text and Numeric Messages Mobile originated text messaging (MOSMS) lets you send and receive short text messages to and from other Mike handsets. Messages you receive appear on your handset’s display and in the text message inbox. If your handset is powered off when you receive a message, your handset notifies you the next time you power it on. If you are out of your coverage area, your handset alerts you when you return to your coverage area.
Messages Receiving Messages When you receive a message, your phone notifies you as it would with any other type of message. See “Message Notifications” on page 47. To view the message: Press A under Read. To dismiss the message notification: Press A under Exit. Reading Messages From the Message Center 1 From the main menu, select Messages > Text Inbox. 2 Select the message you want to read. -orPress the number of the message you want to read. 3 If the message fills more than one screen, scroll to read it.
Creating and Sending Messages information on quick notes, see “Using Quick Notes” on page 51. When you are finished, press O. 4 If you want to send the message, press O or press A under Send. -orTo delete the message without sending it, press A under Cancel. -orIf you want to request confirmation of delivery, save the message as a draft, or set the sending method, press m. Select the option you want.
Messages Tip: For more options, including sending the quick note, press m. Using Drafts When you save a message as a draft, it is saved in the drafts folder. You must have a draft saved to have a drafts folder. To edit a draft: 1 From the main menu, select Messages > Drafts Folder. 2 Select the draft you want to edit. 3 To edit the fields you want to change, follow step 2 through step 8 in “Creating and Sending Messages” on page 50. Using the Outbox 8 Send failed. 7 Re-sent. R Locked.
Managing Memory To delete all unlocked sent messages: 1 From the main menu, select Messages > Text Outbox. 2 Press m. 3 Select Delete All. 4 Press A under Yes to confirm. Locking and Unlocking Sent Messages When you lock a message, it cannot be deleted until you unlock it. Locking or Unlocking a Message 1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to lock or unlock. 3 Press m. 4 Select Lock or Unlock.
54
Mike’s Wireless Web Services Your i830 handset is equipped with a microbrowser that can be used to access Mike's Wireless Web Services and other up-to-the-minute information. You can view specially designed text versions of popular Internet sites that provide news, sports, weather, entertainment, stock quote sites and other useful information. To access the microbrowser: From the idle screen, press m to access the main menu. Scroll to Browser. Press A under Browse to access the microbrowser.
Mike’s Wireless Web Services Below is the list of available options: • Exit Browser — closes the browser and returns you to the idle screen. Use this option when you want to return to the page currently viewed at a later time, without navigating through the entire menu structure again. • Reload — reloads the current Wireless Web page viewed, refreshing the information with the most current from the information provider.
Using Your Phone as a Modem 2 With the phone’s display facing up, insert a data cable’s connector into the accessory connector, until you hear a click. 4 Press A under Change 5 Scroll to the baud rate for your location. Press A under Select. 3 Insert the data plug into the COM port of the other device.
58
Ring Tones To set the ring tone your handset makes when you receive phone calls, message notifications, or call alerts: 1 From the main menu, select Ring Tones. 2 Make sure Vibrate All is set to Off. 3 Scroll through the list of ring tones and select the one you want to assign. Vibrate sets your handset to vibrate instead of making a sound; Silent sets your handset to neither vibrate nor make a sound. Tip: Highlight a ring tone to hear it. 4 Select the features you want to assigned the ring tone to.
Ring Tones 7 When you are finished, press A under Done. Assigning Ring Tones to Contacts This icon S appears on the display. You can set the ring tone your handset makes when you receive phone calls or call alerts from someone you have stored in Contacts. Viewing Ring Tone Assignments 1 From the main menu, select Ring Tones. 2 Make sure Vibrate All is set to Off. 3 Scroll through the list of ring tones and select the one you want to assign. 4 Select Contact.
Deleting Custom Ring Tones Note: Ring tones are stored in your handset using the same memory used to store voice records, Java applications, and wallpaper images. Deleting voice records frees memory space for ring tones. Deleting Custom Ring Tones To delete a custom ring tone: 1 2 3 4 5 6 From the main menu, select Ring Tones. Make sure Vibrate All is set to Off. Scroll to the ring tone you want to delete. Press m. Select Delete. Press A under Yes to confirm.
62
Datebook Datebook stores up to 250 events. You can store events over a 13 month period — 12 months after and 1 month before the current date. A Datebook event contains: • A subject — A name you assign to the event. You can also enter a phone number, Private ID, or Talkgroup number here. After the event is stored, you can call this number from Datebook or when you get a reminder of this event. • A location — The location of the event. You can also enter a phone number, Private ID, or Talkgroup number here.
Datebook 2 Select the event. To change the current view: 1 While viewing Datebook, press m. 2 Select the view you want. Navigating Datebook To scroll through Datebook: Scroll left and right using the navigation key. -orIn week view and month view, press * or #. To see more in day view: Scroll up and down using the navigation key. To highlight a day in month view: Enter the date using the keypad. To go to today’s date: 1 While viewing Datebook, press m. 2 Select Go To Today.
Creating Events 3 If you want to assign a location to the event: Select Location. Enter the date you want. 7 If you want to make the event a recurring event: Enter the location. See “Entering Text” on page 43. -or- Select Repeat. Enter a phone number, Private ID, or Talkgroup number. After the event is stored, you can call this number. If the event occurs more than once a week: Select Multiple Day. Select the days you want. When you are finished, press O.
Datebook Assigning More Options Editing Events To assign more options before storing an event: To change the details of an event: 1 If you have created a reminder for the event and want to set the ring tone for that reminder: 1 2 3 4 Select Ring Tone. Select the ring tone you want from the ring tones stored in your handset. 2 If you want to assign a profile that your handset is switched to while the event is occurring: Select Profile.
Receiving Reminders 5 If the event is not recurring, press O or press A under Yes to confirm. If the event is a recurring event: Select This Event Only to delete only the event selected in step 2. Select Repeat Event to delete all occurrences of the event. Receiving Reminders If you created a reminder for a Datebook event, when the reminder time occurs, your handset notifies you with text on the display and a reminder tone. To view more details about the event: Open the flip. -orPress A under View.
Datebook If the day has more than one event containing numbers to call, select the event containing the number you want to call or send a call alert to. 3 To make a phone call: Press s. -orPress m. Select Call # in Event. To make a Private call or group call: Press and hold the PTT button on the side of your handset. -orIf you did not include a # before the Talkgroup you want to call: Press m. Select Talkgroup. To send a call alert: Press m. Select Alert # in Event.
Java Applications To run an application that does not have a shortcut on the main menu: Your handset arrives with Java applications installed and ready to run. You can download and install more Java applications. 1 From the main menu, select Java Apps. 2 Select the application or suite of applications you want to run. 3 If you have selected a suite of applications, select the application you want to run.
Java Applications Ending Applications 5 Press O or press A under Yes to confirm. 6 When your handset has finished deleting the application, press A under Done. To end an application: To delete all Java applications: 1 From the main menu, select Java Apps. 2 Scroll to the application you want to end. 3 Press A under End. Tip: You can also end applications from the Suspended Apps screen. 1 2 3 4 5 To end all applications: Managing Memory 2 Select the application you want to resume.
Shortcuts on the Main Menu Shortcuts on the Main Menu When you install an application, you can create a shortcut to the application on the main menu. To create a shortcut to an application that is already installed: 1 From the main menu, select Settings > Personalize > Menu Options > Add/Remove Apps. -orFrom the main menu: Press m. Select Main Setup > Add/Remove Apps. 2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it.
Java Applications • Restricted — No Java or similar software applications may access the location of your handset. However, location information may still be available to the handset’s owner, fleet manager, or account administrator. • Unrestricted — All Java applications may access the location of your handset, without notifying you. • By Permission — When a Java application attempts to access the location of your handset, you are prompted to give permission.
Java Applications and GPS Enabled • For this session — If the application requests access to the location of your handset again before you power off your handset, the request is granted without notifying you. • Only Once — If the application requests access to the location of your handset again, you are prompted to grant or deny permission.
74
GPS Enabled Your handset’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your handset, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.
GPS Enabled Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate. Even where adequate signals from multiple satellites are available, your GPS feature will only provide an approximate location, often within 150 feet (45 meters) but sometimes much further from your actual location.
Enhancing GPS Performance To calculate your location again: Press A under Rfrsh. It may take your handset several minutes to complete the process of determining your location. During this time, a message usually appears on your handset’s display saying your handset is scanning for satellites. For tips on getting the best location calculation, see “Enhancing GPS Performance”. The Position screen displays the updated information.
GPS Enabled • Hold your handset to enhance reception. Signals from GPS satellites are transmitted to your GPS antenna, which is in your handset antenna. Hold your handset away from your body, giving the antenna clear access to satellite signals. Do not cover the antenna area with your fingers or anything else. • In a car. When using the GPS Enabled feature in a car, position your handset so that the GPS antenna has good access to GPS signals through the car’s windows.
Setting Privacy Options The almanac contains information about the location of satellites, their operational status, and other satellite information. Keeping this information updated enhances the performance of your GPS feature. In most cases, your handset will be able to get a fix in strong satellite signal conditions with outdated almanac data, but it may take longer. If your satellite almanac data is out of date, your handset may prompt you to update it.
GPS Enabled 2 Select On or Off. 3 Enter the current GPS PIN. Note: When you receive your handset, your GPS PIN is 0000. 4 Press A under Ok. To change your GPS PIN: 1 From the main menu, select Settings > Security > Change Password > GPS PIN. 2 Enter the current GPS PIN. Note: When you receive your handset, your GPS PIN is 0000. 3 4 5 6 7 Press A under Ok. Enter the new 4- to 8-digit GPS PIN. Press A under Ok. Enter the new 4- to 8-digit GPS PIN to confirm. Press A under Ok.
Using GPS with Map Software Getting Started To connect your handset to your laptop or other device: 1 Open the flap covering the handset’s accessory connector. Make sure the COM port settings of your laptop or other device are set to the following: • • • • • Bits per second: 4800 Data bits: 8 Parity: None Stop bits: 1 Flow control: Hardware To set your handset to send location information to your laptop or other device: 1 From the main menu, select GPS > Interface. 2 Set NMEA OUT to On.
82
Voice Records A voice record is a recording you make with your handset and can play back. You can record notes to yourself or phone calls. Your handset can store up to 20 voice records. Creating Voice Records To record a phone call: 1 While on an active call, press m. 2 Select Record. 3 When you are finished recording, press O. Note: Recording of phone calls is subject to applicable laws regarding privacy and recording of phone conversations.
Voice Records 5 Press O. Deleting Voice Records To delete a voice record: 1 From the main menu, select VoiceRecord. 2 Scroll to the unlocked voice record you want to delete. 3 Press m. 4 Select Delete. 5 Press O or A under Yes to confirm. To delete all voice records: 1 2 3 4 5 From the main menu, select VoiceRecord. Scroll to any voice record. Press m. Select Delete All. Press O or A under Yes to confirm. Locking Voice Records When you lock a voice record, it cannot be deleted until you unlock it.
Memo Memo lets you store a number, make a call to that number, and save it to Contacts. To create a memo: 1 From the main menu, select Memo. 2 Enter the number using your keypad. 3 Press O. To view the memo later: 1 From the main menu, select Memo. To delete the memo: 1 From the main menu, select Memo. 2 Press and hold A under Delete. To edit the memo: To store the memo number to Contacts: 1 2 3 4 From the main menu, select Memo. Press m. Select Store to Cntcs.
86
Shortcuts Using a Shortcut Shortcuts lets you access most menu options by pressing a number on your keypad or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time. If you know the shortcut number: Creating a Shortcut If you do not know the shortcut number: 1 Go to the menu item you want to create a shortcut for. 1 From the main menu, select Shortcuts. 2 Select the shortcut you want to use.
Shortcuts 8 Repeat step 4 through step 7 for all the items you want to move. 9 Press A under Done. To change the name or number assigned to a shortcut: 1 From the main menu, select Shortcuts. 2 Highlight any shortcut. 3 Press A under Edit. Deleting Shortcuts To delete a shortcut: 1 2 3 4 5 From the main menu, select Shortcuts. Scroll to the shortcut you want to delete. Press m. Select Delete. Press O or press A under Yes to confirm.
Customizing Your Handset Setting the Volume To set the volume of the sound coming from the handset’s earpiece or speaker: 1 From the main menu, select Settings > Volume. 2 Select Earpiece to set the earpiece volume. -orSelect Speaker to set the speaker volume. 3 To set the volume: Scroll left or right. -orPress the volume keys on the side of your handset. 4 Press O. To set the volume of the handset’s ring: Press the volume controls.
Customizing Your Handset Note: If you are using your phone with a headset, and you have the Flip to End option set to On, closing your flip sends incoming sound to the headset and does not end the call. See “Setting Flip Actions” on page 41. Using a Remote PTT Button If you are using a headset or other accessory with a remote PTT button, you can use the remote PTT button for phone calls and Private calls. For phone calls, use the remote PTT button to answer calls, switch between calls, and end calls.
Using Settings Phone Calls Features • Notifications — See “Setting Notification Options” on page 47. • Java App Control — If you have installed a Java application that answers phone calls, this setting lets you turn that application on. The Phone Calls menu controls how your handset handles phone calls: 2-Way Radio Features • Contrast — sets the contrast of the display.Language — sets the language that your handset displays.
Customizing Your Handset Personalize Features Volume Features The Personalize menu makes main menu items easier to access. The Volume menu sets the volume of sounds your handset makes: • Menu Options — Reorder Menu lets you change the order of the items on the main menu by grabbing and moving them; Add/Remove Apps lets you create a shortcut to a Java application on the main menu. • Up Key — sets the main menu item you access when you scroll up from the idle screen.
Using Settings • Phone Lock — turns on a feature that locks your handset, either immediately or automatically after a set period of inactivity. Your default unlock code is 0000. If you forget your unlock code, contact your Mike dealer to reset it. • Keypad Lock — locks the handset’s keypad, either immediately or automatically after a set period of inactivity. See “Accessories” on page 16 for more information on locking and unlocking the keypad.
94
Profiles Viewing Profiles A profile is a group of settings saved together so that you can apply them to your handset easily. To view the profiles stored in your handset: A profile contains these settings: • Ring Tones — sets all options described in “Ring Tones” on page 59, except assigning ring tones to Contacts. • Display/Info — sets Wallpaper, Color Palette, Text Size, and Backlight options. See “Display/Info Features” on page 90. • Phone Calls — sets Set Line and Auto Ans options.
Profiles When you do this, your handset either: • Updates the profile in effect to reflect these changes, without notifying you -or• Creates a temporary profile that contains these changes. To set your handset to create a temporary profile that contains changes you make to settings: 1 2 3 4 From the main menu, select Profiles. Press m. Select Setup > Temp Profile. Set this option to On.
Creating Profiles 3 Press m. 4 Select Store Changes. Editing Profiles The temporary profile is stored with the name of the profile it is based on. The profile it is based on, as it existed before you made changes to settings, is gone. 1 2 3 4 Creating Profiles Follow the applicable instructions in “Creating Profiles” to edit the various fields 1 From the main menu, select Profiles. 2 Select New Profile. -or- Deleting Profiles Scroll to any profile. Press m. Select New.
Profiles Setting Call Filtering The call filtering setting in each profile lets you control which calls, call alerts, and message notifications your handset notifies you of, and which it ignores. To set call filtering: 1 While setting options for a profile, select Call Filter. 2 To set filtering options for phone calls, select Phone. • Off sets your handset to notify you of all phone calls. • All sets your handset to ignore all phone calls.
Understanding Status Messages You may receive status messages under certain conditions. The following table lists and describes the status messages. Note: When your flip is closed, the one-line display screen shows a shortened version the status message displayed in the full-size screen. To see complete status messages, open the flip.
Understanding Status Messages Status Messages (one-line display) Self Check Self Check Status Messages (full-screen display) Message Description Status Messages (one-line display) Status Messages (full-screen display) Message Description Please Enter Special Code You have inserted a SIM card that will work with a handset. Contact TELUS Mobility Client Care if you believe this is a valid SIM card. Insert SIM Insert SIM Your SIM card is not being detected.
Status Messages (one-line display) Status Messages (full-screen display) Message Description Unable to Locate Sats Could not find GPS satellites. Technical Error A problem occurred in your handset’s GPS circuitry. If this error occurs, contact TELUS Mobility Client Care.
102
Safety and General Information Portable Radio Product Operation and EME Exposure • United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J. • American National Standards Institute (ANSI) / Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1992. • Institute of Electrical and Electronics Engineers (IEEE). C95. 1-1999 Edition. • International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998. • Ministry of Health (Canada).
Safety and General Information When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone. • Phone or Two-way radio mode: one inch (2.5 cm) • Data operation using any data feature with or without an accessory cable: one inch (2.5 cm) Two-way radio operation Antenna Care When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.
Portable Radio Product Operation and EME Exposure ALL MODELS WITH FCC ID AZ489FT5828 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Safety and General Information Electro Magnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Medical Devices Pacemakers The Advanced Medical Technology Association (AdvaMed) recommends that a minimum separation of 6 inches (15 cm) be maintained between a handheld wireless radio product and a pacemaker.
Operational Warnings Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Use While Driving Check the laws and regulations on the use of radio products in the area where you drive. Always obey them. When using the radio product while driving, please: • Give full attention to driving and to the road.
Safety and General Information other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.
Accessory Safety Information Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product. Accessory Safety Information Important: Save these accessory safety instructions.
Safety and General Information • • • • • • • The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet. Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician. Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
MOTOROLA LIMITED WARRANTY Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES AND SOFTWARE PURCHASED IN THE UNITED STATES OR CANADA PRODUCTS COVERED LENGTH OF COVERAGE Products as defined above. One (1) year from the date of purchase by the first consumer purchaser of the product. What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc.
What is not covered? (Exclusions) Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.
MOTOROLA LIMITED WARRANTY Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided "as is" and without warranty. Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable. What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty.
BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you.
Patent and Trademark Information Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software.
116
Index Numerics 2-way radio 91 see also Private calls, group calls, and call alerts 3-way calling 40 A Accessories 16 safety 109 Advanced Voice Mail with Fax 48 Alpha mode 43 B Backlight 90 Battery care 5 charging 4, 5 door 3 inserting 3 safety 108 Baud rate 93 C Call alerts 17 deleting 21 queue 20 receiving 20 responding 20 sending 20 sorting 21 viewing 20 call filtering 98 Call forwarding 38 all calls 38 missed calls 39 off 39 Call Timers 42 Call Waiting 37 off 37 Calls 3-way 40 answering automatically
Index showing only Private IDs 32 SIM card 31 storing from idle screen 34 storing from Memo 34, 85 storing from recent calls 29, 34 type 29, 31 viewing 32 voice name 34 D Datebook 25 Display backlight 90 contrast 91 options 8 screen 8 E Email 31, 33, 57 Emergency calls 27 End key 2 F Faxes receiving 57 118 sending 57 Flip action 23, 41 G GPS Enabled 75 almanac data 78 best results 77 map software 80 privacy options 79 security 79 viewing location 76 GPS PIN 93 GPS, see GPS Enabled Group calls 21, 91 ma
M Memo 85 calling from 85 creating 85 editing 85 storing to Contacts 34, 85 viewing 85 Memory Java applications 70, 84 mobile originated text messaging 53 ring tones 60 voice records 84 Menu key 2, 9 Menus 8 context-sensitive 2, 9 main menu 9 Message notifications 47, 55 setting options 47 Messages 55 see also mobile originated text messaging receiving 47, 55 text and numeric 49 Mobile originated text messaging 49 creating messages 50 deleting 52, 53 drafts 52 icons 52 memory 53 outbox 52 quick notes 51 re
Index viewing 95 PTT One Touch 19 One Touch, setting 19 PUK code 13 R Radio frequency 103 Recent calls 18, 24, 29 creating MOSMS messages 51 deleting 30 display time 93 icons 29 storing to Contacts 29, 34 viewing 29 Redialing 25, 91 Ring tones 31, 59 deleting 61 memory 60 off 59 setting 59 setting in Contacts 33, 60 vibrate 59 viewing assigned 60 120 S Safety 103 accessory 109 battery 108 electromagnetic interference 106 medical devices 106 radio frequency 103 Security 92 Service provider 16 Settings 90 r
receiving 48 sending calls to 23, 48 setting up 39, 47 Voice name 26, 32 creating 34 Voice records 83 creating 83 deleting 84 labelling 83 locking 84 memory 84 playing 83 Volume, setting 89, 92 W Waits dialing 41 storing 35 Wireless Web 55 Word mode 43 121
