User Guide i776 by Motorola® www.nextel.com © 2008 Sprint. Sprint and the NEXTEL name and logo are trademarks of Sprint. Other marks are the property of their respective owners.
Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.hellomoto.com Note: Do not ship your phone to the above address. If you need to return your phone for repairs, replacement or warranty service, please contact the Motorola Customer Support Center at: 1-800-453-0920 (United States) 1-877-483-2840 (TTY/TDD United States for hearing impaired) Product Support: www.motorola.
FCC Notice to Users The following statement applies to all products that have received FCC approval. Applicable products bear the FCC logo, and/or an FCC ID in the format FCC-ID: IHDP56HS1 on the product label. Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21. This device complies with part 15 of the FCC Rules.
Table of Contents Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Your Phone’s Menu. . . . . . . . . . . . . . . . . . . . . . . . ii Use and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Section 1: Getting Started . . . . . . . . . . . . . . . . . . 1 1A. Setting Up Service . . . . . . . . . . . . . . . . .
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . 80 2C. Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 SIM Card Security . . . . . . . . . . . . . . . . . . . . . . . . . Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . Your Phone’s Keypad Lock . . . . . . . . . . . . . . . . . Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . GPS Privacy Options . . . . . . . . . . . . . . . . . . . . . . . Java Applications & GPS Security . . . . . . . . . . .
Transferring Items Via Bluetooth . . . . . . . . . . . 146 Section 3: Service Features . . . . . . . . . . . . . . 149 3A. Service Features: The Basics . . . . . . . . 150 Message Center . . . . . . . . . . . . . . . . . . . . . . . . . 150 Receiving Messages . . . . . . . . . . . . . . . . . . . . . . 151 Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 Multimedia Messages . . . . . . . . . . . . . . . . . . . . 154 Text Messaging (SMS) . . . . . . . . . . . . . . . . . . . . .
Introduction This User Guide introduces you to your wireless service and all the features of your new phone. It’s divided into four sections: ⽧ Section 1: Getting Started ⽧ Section 2: Using Your Phone ⽧ Section 3: Service Features ⽧ Section 4: Safety and Warranty Information User Guide Note Because of updates in phone software, this printed guide may not be the most current version for your phone. Visit www.nextel.com and sign in to access the most recent version of the user guide.
Your Phone’s Menu 4: Home Icons 5: Backlight The following table outlines your phone’s menu structure. For more information about using your phone’s menus, see “Navigating Through Phone Menus and Options” on page 18.
11: Notifications 6: Center Key 12: DTMF Dialing 7: Left Sftkey 13: Prepend 8: Right Sftkey 9: Power Up 3: DC/GC Options 1: Tkgrp Silent 5: Volume 2: Tkgrp Area 6: Security 3: One Touch DC 1: Phone Lock 4: Alert Type 2: Keypad Lock 5: On/Off Settings 3: SIM PIN 6: Store Rcvd Info 4: GPS PIN 7: PTT Backlight 5: Change Passwds 4: Personalize 7: Advanced 1: Menu Options 1: Reorder Menu 1: Alert Timeout 2: Add/Remove Apps 2: Headset/Spkr 2: Up Key 3: Connectivity 3: Down Key 4: Reset
7: Baud Rate Ring Tones Bluetooth 1: Buy Ring Tones 1: Hands Free 2: Vibrate All 2: Link to Devices 3: < list of ringtones > 3: Device History 4: Vibrate 4: Setup 5: Silent 5: Find Me Contacts My Info Messagesa Direct Talk 1: [Create Mesg] 1: Go To Direct Talk 2: Voice Mail 2: Setup 3: Inbox 4: Drafts 5: Sent Items 1: Direct Launch 2: State Tone 3: Help 6: Net Alert Direct Connect 7: SMS VoiceRecord Call Forward iv Downloads
GPS 2: Standard 1: Position 3: Car 2: Privacy 4: Meeting 3: Interface 5: Office Datebook 6: Outdoors Memo 7: Headset Call Timers 8: PRVT Only 1: Last Call 2: Phone Reset 9: CONTCS Only 10: Surveillance 3: Phone Lifetime Call Alert 4: DC/GC Reset Camera 5: DC/GC Lifetime Media Center 6: Kbytes Reset Recent Calls Shortcuts Profiles 1: [New Profile] a.The Messaging menus may look slightly different, depending on the messaging setup of your phone.
Use and Care To care for your Motorola phone, keep it away from: vi liquids of any kind dust and dirt Don’t expose your phone to water, rain, extreme humidity, sweat, or other moisture. Don’t expose your phone to dust, dirt, sand, food, or other inappropriate materials. extreme heat or cold cleaning solutions Avoid temperatures below -10°C/14°F or above 45°C/113°F. To clean your phone, use only a dry soft cloth. Don’t use alcohol or other cleaning solutions.
Section 1 Getting Started
Section 1A Setting Up Service Setting Up Your Phone 1. Make Sure your SIM card is in Place. 2. Install the battery. ⽧ Setting Up Your Phone (page 2) ⽧ Activating Your Phone (page 3) ⽧ Setting Up Your Voicemail (page 3) ⽧ Enabling Security (page 4) ⽧ Account Passwords (page 4) ⽧ Getting Help (page 5) Setting up service on your new phone is quick and easy.
Your phone’s battery should have enough charge for your phone to turn on and find a signal, set up your voicemail, and make a call. You should fully charge your battery as soon as possible. See “Charging the Battery” on page 12 for details. Activating Your Phone 䢇 䢇 If you purchased your phone at a Nextel Store, it is probably activated and ready to use. If your phone is not activated, please call Nextel Customer Service at 1-800-639-6111 from any other phone.
Enabling Security Account Passwords You must enable security the first time you power on your phone or within ten days of first activation of your phone. With Nextel service, you enjoy unlimited access to your personal account information and voicemail account. To ensure that no one else has access to your information, you need to create passwords to protect your privacy. 1. Press and hold P for two seconds to power on your phone. 2. Press Ok (right softkey). Account Username and Password 3.
From Your i776 Phone You’ll create your voicemail password (or passcode) when you set up your voicemail. See “Setting Up Your Voicemail” on page 3 for more information on your voicemail password. 䢇 Getting Help 䢇 Setting Up Service Voicemail Password Press *4N to check minute usage and account balance. Press *3N to make a payment. From Any Other Phone 䢇 䢇 Nextel Customer Service: 1-800-639-6111. Business Customer Service: 1-800-390-9545 Managing Your Account Operator Services Online: www.nextel.
Section 1B Your Phone Phone Basics ⽧ Your Phone (page 6) ⽧ Getting Started With Your Phone (page 8) ⽧ Features of Your Phone (page 15) ⽧ Navigating Through Phone Menus and Options (page 18) 1. Left Softkey 11. Right Softkey ⽧ Displaying Your Phone Number and Direct Connect Number (page 19) 2. Menu Key 10. Camera Key 3. Talk Key 9. End/Power Key 4. Navigation Key 8. OK key 5. Headset Jack 7.
1. Left Softkey (-) lets you select softkey actions or menu items corresponding to the bottom left line on the display screen. 2. Menu (M) lets you access the phone’s menu from standby mode and allows you to access contextsensitive menus from other screens. 3. Talk Key (N) allows you to place or receive calls, answer Call Waiting, or use Three-Way Calling. 4. Navigation Key scrolls through the phone’s menu options and acts as a shortcut key from standby mode. 䡲 Press Up to access Ringtones.
13. Antenna delivers the best receiption when fully extended. 14. Smart Button (() anticipates the next action you are likely to perform. For example, when you highlight a menu item, you can press the Smart Button to select it. You can also use the Smart Button to make and end calls, navigate menus or exit applications when your phone is closed. 15. Speaker Button ()) lets you place or receive calls in speaker mode. In standby mode, pressing the speaker button turns Direct Connect speaker mode on and off.
Your SIM Card Locating the SIM Card Your SIM (Subscriber Identity Module) card is a small card inserted into the SIM card holder within your phone behind the battery area. If no SIM card came with your phone, contact Nextel Customer Service at 1-800-639-6111. Most users will never need to remove or insert the SIM card. However, if you wish to, follow the instructions in “Removing and Inserting the SIM Card” on page 9.
Note Protect your SIM card as you would any delicate object. Store it carefully. Using Your Phone’s Battery and Charger WARNING To insert your SIM card: 1. With your phone powered off, remove the battery door and battery. See “Removing the Battery” on page 12. 2. Lift the rubber flap directly above the SIM card holder, and then carefully slide the SIM card into your phone, until it lies flat in the SIM card holder. Important Do not touch the gold-colored areas of your SIM card.
Long backlight settings, searching for service, vibrate mode, browser use, and other variables may reduce the battery’s talk and standby times. Tip Watch your phone’s battery level indicator and charge the battery before it runs out of power. 2. Remove the battery cover from the back of the phone Phone Basics Note Installing the Battery 1. With your thumbs, press down on the battery cover on the back of your phone and slide it up toward the antenna to release it. 3.
4. Replace the battery cover and press down until you hear a click. Charging the Battery Charge your battery as soon as possible so you can begin using your phone. Keeping track of your battery’s charge is important. If your battery level becomes too low, your phone automatically turns off, and you will lose any information you were just working on. For a quick check of your battery level, glance at the battery charge indicator located on your display screen. Removing the Battery 1.
䊳 Plug the flat end of the charger into the phone’s charger connector and the other end into an electrical outlet. With the approved Li-Ion battery, you can recharge the battery before it becomes completely run down. Battery Use and Battery Safety 䢇 Motorola recommends you always use Motorola-branded batteries and chargers. The warranty does not cover damage caused by non-Motorola batteries and/or chargers.
Important Motorola mobile devices are designed to work best with qualified batteries. If you see a message on your display such as Invalid Battery or Unable to Charge, take the following steps: • Remove the battery and inspect it to confirm that it bears a Motorola “Original Equipment” hologram; 䢇 䢇 • If there is no hologram, the battery is not a qualified battery; • If there is a hologram, replace the battery and retry charging it; • If the message remains, contact a Motorola Authorized Service Center.
WARNING Never dispose of batteries in a fire because they may explode. Turning Your Phone On and Off Turning Your Phone On 䊳 Press and hold P for approximately two seconds. As your phone connects to the network, you see a connecting message. Your phone may require you to enter identifying information to use it or to access specific features. Turning Your Phone Off 䊳 Press and hold P for two seconds until you see the powering down animation on the display screen.
䢇 䢇 䢇 䢇 䢇 䢇 Your Contacts list allows you to store up to 600 entries, with several numbers or addresses per entry (page 98). The built-in Datebook offers several personal information management features to help you manage your busy lifestyle (page 106). The GPS Enabled feature works in connection with available location-based services (page 118). Word English Text Input lets you quickly type messages with one keypress per letter (page 21).
Bluetooth In Use — Your phone is using Bluetooth. If this icon is blinking, then your phone is in discoverable mode. If this icon is static, your phone is active in a Bluetooth connection. 12 Active Phone Line — 1 indicates phone line 1 GLI Call Forward — Your phone is set to forward calls. See “Call Forwarding” on page 176.
7 c Hearing Aid — Your phone is set for use with a hearing aid and is active on a phone call. See “Using Your Phone With a Hearing Aid Device” on page 193. appears any time a context-sensitive menu is available. Press M to access the menu When scrolling through the main menu, it may be necessary to select More to view additional main menu options. Depending on which menu view you’re using, either highlight More and press r or press More (right softkey).
To go to the previous menu: 䊳 Press Back (right softkey). To return to standby mode: 䊳 read the text for a quick overview of the feature. For more information, refer to this guide. Displaying Your Phone Number and Direct Connect Number Press P.
Direct Connect — the number that others use to contact you using Nextel Direct Connect. This number appears when you receive your alert notification after enabling security on your phone. 䡲 Group ID — the number of the Talkgroup you have joined. 䡲 Carrier IP — the IP address assigned to Nextel. This number appears when you register for packet data services. 䡲 IP1 Address and IP2 Address — the IP addresses you use to access the Internet with your phone.
Selecting a Text Input Mode Your phone provides convenient ways to enter letters, numbers, and symbols whenever you are prompted to enter text (for example, when adding a Contacts entry or when composing text and multimedia messages). To choose a text input mode: 1. At a screen requiring you to enter text, press M to change the text input mode. 2. Select one of the following options: 䡲 Alpha to cycle through the alpha characters associated with the letters on the keypad. (See page 22.
3. If the word that appears is not the desired word, press 0 to change the word on the display to the next most likely word in the database. Repeat until the desired word appears. Adding a Word to the Database If a word you want to enter is not displayed as an option when you are using Word Text Input, add it to the database. 1. Select the Alpha text input mode. (See “Selecting a Text Input Mode” on page 21.) 2. Enter the word. (See “Entering Text Using Alpha Mode” on page 22.) 3.
Key ABC DEF GHI JKL MNO PQRS TUV WXYZ English Sequence Space . ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ $ ¥ ABC2ÁÃÂÀÇ DEF3ÉÊÈ GHI4ÍÌ JKL5 MNñO6ÓÕÔÒ PQ R S 7ß TUV8 Ú Ü Û Ù WXYZ 9 +-0*/\[]=><#§ Space Shift Caps Lock Back Entering Symbols, Numbers, and Quick Notes To enter symbols: 䊳 Select the Symbols mode. (See “Selecting a Text Input Mode” on page 21.) To enter a symbol, press the appropriate key indicated on the display. To enter numbers: 䊳 Select the Numeric mode and press the appropriate key.
Special Function Keys Some of the phone’s keys assume different functions while in Alpha or Word mode. When none of these icons appear, letters typed are lowercase. Scrolling up after typing a letter makes that letter uppercase. Note Spaces Press # for a space. Capitalization When you press and hold the # key, it acts as a three-way toggle. Press and hold # to make the next letter typed uppercase (shift), to make all subsequent letters typed uppercase (caps lock), or to go back to lowercase letters.
Your phone comes with the following accessories: 䢇 A Li-Ion battery and charger. 䢇 A 128K SIM card. Various accessories are available for use with your i776 phone, including cases, vehicle power chargers, data cables, hands-free accessories, and more. To order additional accessories, go to www.nextel.com or call 1-866-866-7509. You can also contact your Nextel Authorized Representative or stop by any Sprint Store. For information on Sprint Store locations, go to www.sprintstorelocator.com.
Section 2 Using Your Phone
Section 2A Types of Calls Making and Answering Calls With the Nextel National Network, Nextel Direct Connect, and your i776 phone, you have the following traditional wireless phone and Nextel Direct Connect services available to you: 䢇 Digital Wireless Phone Calls offer clear calls and many extra services, including missed call notification, Three-Way Calling, speakerphone, and speed dialing (page 29).
Talkgroup Calls allow two-way radio calling to up to 3. Press N. 100 Nextel Talkgroup customers simultaneously (page 51). 4. Press P when you are finished. Note 䢇 To learn more about the differences between Nextel Group Connect calls and Talkgroup calls, please see “Difference Between Group Connect and Talkgroup Calls” on page 51. Nextel Direct Talk allows for two-way radio communication “off the network” between two or more phones equipped with this capability (page 53).
Tip When the phone is closed, you can answer a call by pressing s. To set the phone to answer and end calls by opening and closing the phone, press M > Settings > Phone Calls > Flip Activation and set Flip To Ans and Flip To End to On. Your phone notifies you of incoming calls in the following ways: 䢇 The phone rings or vibrates. 䢇 The indicator light flashes. 䢇 The backlight illuminates. 䢇 The screen displays an incoming call message.
Important Always report your location to the 911 operator when placing an emergency call. Some designated emergency call takers, known as Public Safety Answering Points (PSAPs) may not be equipped to receive GPS location information from your phone.
In-Call Options Pressing M during a call displays a list of available in-call features. To select an option, highlight the option and press r. The following options may be available through the Options menu: 䢇 Hold to place the call on hold. 䢇 3 Way to initiate a three-way call. 䢇 Use Bluetooth to switch from the phone’s microphone to a Bluetooth device. 䢇 2nd Call to place a second. 䢇 Contacts to display your Contacts list. 䢇 Recent Calls to display Recent Calls list.
Note The End-of-Call options are not displayed for calls identified as No ID or Restricted. Saving a Phone Number Your phone can store up to 10 phone numbers in each of 600 Contacts entries. Each entry’s name can contain 20 characters. Your phone automatically sorts the Contacts entries alphabetically. (For more information, see “Contacts” on page 98.) 1. Enter a phone number and press M. 2. Select Store Number and press r. 3.
There are two types of pauses available on your phone: 䢇 Wait sends the next set of numbers when prompted. 䢇 Pause automatically sends the next set of numbers after three seconds. Note You can have multiple pauses in a phone number and combine waits and pauses. To dial or save phone numbers with pauses: 1. Enter the phone number. 2. Press and hold * until the letter P appears. The P represents a three-second pause. If you want a pause longer than three seconds, press and hold * more than once.
2. Select an entry and press N. – or – Press the Direct Connect button to make a Direct Connect or Group Connect call. Note You cannot make calls from recent Calls to entries identified as No ID or Restricted. Making a Phone Call Using a Voice Name If you have created a voice name in Contacts for the number you want to call (see page 101), say the voice name into your phone to enter the number.
Using Speakerphone Turning on speakerphone makes incoming sound come out of the phone’s speaker instead of the earpiece. Speakerphone is available whenever you are on an active phone call. To turn speakerphone on or off: 䊳 Press s or press Spkr (right softkey). Using Mute Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call. To turn mute on: 䊳 Press Mute (left softkey). While mute is on, Unmute appears as the left softkey option.
Note 1. Enter the Direct Connect number you want to call. (See “Dialing Nextel Direct Connect Numbers” below.) 2. Press and hold the Direct Connect button on the If you are calling or saving a Direct Connect number for a Sprint phone with Direct Connect capabilities, the Direct Connect number may be the same as the wireless phone number. When saving the Direct Connect number, insert asterisks in place of hyphens (913*555*1234). side of your phone. Begin talking after your phone emits a chirping sound.
Making Direct Connect Calls From Contacts If you have numbers stored in Contacts, you can use these numbers to make calls. For information on entering numbers into Contacts, see “About Contacts” on page 98. 1. Press M > Contacts. 2. Scroll to the name or number you want to call. 3. Press and hold the Direct Connect button on the side of your phone. Your phone places the call to the Direct Connect number stored in the Contacts entry, even if the Direct Connect icon is not displayed.
When you receive a Direct Connect call, your phone emits a tone or vibrates. You then hear the voice of your caller. 1. Wait for the caller to finish speaking. 2. Press and hold the Direct Connect button on the side of your phone. Continue as you would on any Direct Connect call. 3. Press P to end the call. A Direct Connect call ends automatically after there is no activity on the call for several seconds.
Group Connect Call With a Direct Connect Number” on page 41. 2. Press the Direct Connect button. Answering Group Connect Calls 䊳 Proceed as if answering a Direct Connect call from one user. Only one person at a time may speak on a Group Connect call. Creating Groups in Contacts 1. Press M > Contacts. 2. Select [New Group]. 3. If you want to assign a name to the Group, enter the name. Note If you do not assign a name, the Group is named “Group” followed by the number of members in the Group.
To move between Contacts, the Recent Calls list, and Memo, scroll left or right, or press * or #. 2. Scroll to the members you want from Contacts and press r. To chose a number from the Recent Calls list, or Memo, press M. A checkmark appears next to each selected member. Note To deselect a member, scroll to a selected member and press r. 3. Press Done (left softkey) and then press Save (left softkey) to save the group. To add Group members manually from the keypad: 1.
5. If you want to save the Group you have created, press M and select Store Group. – or – If you do not want to save the Group, press Done (left softkey). 6. To make the call, press the Direct Connect button. Removing Members or Groups To remove a member from a Group: 1. From Contacts, scroll to the Group you want to delete the member from. To remove all members from a Group: 1. From Contacts, select a Group. 2. Press Edit (left softkey). 3. Press M. 4. Select Remove All. 5. Press Yes (left softkey).
To store a member from an active Group Connect call: 1. During an active Group Connect call, press M. 1. During an active Group Connect call, press M. 2. Press M. 2. Select Store Group. 3. Select Store Number. 3. If you want, add more information to the entry. 4. Select the number or member you want to store. Note You cannot record a voice name during an active call. 4. Press Save (left softkey). Storing Members of Groups To store a member from the Recent Calls list or within Contacts: 1.
Group Connect Call Details During a Group Connect call, you can view details about the other group members, such as their name or Direct Connect number, and their status on the call. To view Group Connect call details: 䊳 Press Details (left softkey). In the Details view, these icons appear next to member names or Direct Connect numbers: T The member of the Group who is speaking. A A member of the Group who is active on the Group Connect call, but not speaking.
You cannot talk or listen on a Direct Connect call while a picture is being transmitted. Other activities, such as searching for a picture, do not prevent you from talking or listening. Starting a Call by Sending a Picture To send a picture during a call: To do this, you must have the Direct Connect number and IP address of the person you want to send to stored in your Contacts. softkey). A list of pictures that can be included in a Direct Connect call appears. 2. Select the picture you want to send.
6. Press the Direct Connect button to send the picture. 7. Wait while the picture is transmitted. The Direct Connect call is temporarily interrupted while a picture is transmitted. Accepting a Picture 1. When you see the message asking you if you want to accept the picture, press Yes (left softkey). 2. Wait while the picture is transmitted. The Direct Connect call is temporarily interrupted while a picture is transmitted. 8.
Sending My Info To turn your phone’s ability to send and receive pictures in Direct Connect calls on or off: You can control what portion of the information in My Info is sent and whether it is sent automatically in every Direct Connect call or only when you choose to send it. 1. Press M > Settings > DC/GC Options > On/Off Settings. 2. Select Pictures and press r to check or uncheck the box. 3. Press Done (left softkey) to save the setting.
4. A checkmark appears next to the fields that will be sent. To add or remove the checkmark, select the field. 5. When you are finished, press Done (left softkey). To control whether your information is sent automatically: 1. Press M > My Info. To start a call by sending My Info: 1. Press M > My Info. 2. Press M. 3. With Direct Send My Info highlighted, press r. 4. Use the keypad to enter the Direct Connect number you want to send the information to. 2. Press M. – or – 3.
3. Use the keypad to enter the Direct Connect number you want to send the contact to. 1. While in a Direct Connect call, press M. – or – 2. Select Contacts. Press Browse (left softkey). Select Recent Calls, Contacts, or Memo. Select the number you want to enter. 3. Scroll to the Contacts entry you want to send and select Send Via... > Send via PTT. Note If the Contacts entry you scrolled to is a Group, you may be prompted to allow yourself to be a part of the group being sent.
You can also view My Info from other phones on the Recent Calls list. See “Recent Calls” on page 92. Sending Groups Using Direct Send You can send a Group using Nextel Direct Send so that the person who receives the Group can use the list. To send a Group from the Recent Calls list: 1. From Recent Calls, scroll to the Group you want to send and press M. Press Browse (left softkey). Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 5.
number you want to send the contact to. – or – Press Browse (left softkey). Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 6. When Ready to Send appears on the display, press the Direct Connect button to send the contact information. The Group will display in the Recent Calls list on the phone that you send the Group to. Making and Answering Talkgroup Calls A Talkgroup is a predetermined group of Direct Connect users, created by an account administrator.
Joining a Talkgroup To participate in a Talkgroup, the account administrator must first add you to the membership and then you must “join” the Talkgroup. Making Talkgroup Calls 1. Press # and then enter the Talkgroup number using the keypad. – or – 1. Press Contacts (right softkey). Select the Talkgroup from Contacts or the Recent Calls list. 2. Scroll to the Talkgroup you want to join. 3. Press Join (left softkey). You can now receive communications from other members of this Talkgroup.
Responding to a Call Alert Note Sending a Call Alert lets the recipient know you want to talk to him or her on a Nextel Direct Connect call. When you send a Call Alert, the recipient’s phone alerts them and displays your name or Direct Connect number. the alert to. 2. Press Alert (left softkey). 3. When “Ready to Alert” appears, press the Direct Connect button to send the Call Alert. Note You can send a Call Alert from Recent Calls or Contacts.
Using the Call Alert Queue Responding to Call Alerts in the Queue When you queue a Call Alert, it remains in the Call Alert queue until you make a Direct Connect call to the sender or delete it. After you queue a Call Alert, you can respond to it by making a Direct Connect call to the sender or sending a Call Alert to the sender. Viewing Call Alerts To make a Direct Connect call to the sender: 1. Press M > Call Alert. 2. Scroll through the list.
To delete a Call Alert from the queue: Making and Answering Direct Talk Calls 1. From the Call Alert queue, scroll to the Call Alert you want to delete. 2. Press M. 3. Select Delete. 4. Press r or press Yes (left softkey) to confirm. To delete all Call Alerts from the queue: 1. From the Call Alert queue, press M. 2. From the Call Alert menu, select Delete All. 3. Press r or press Yes (left softkey) to confirm.
The following features are not available while in Direct Talk mode: 䢇 On-network phone calls. 䢇 On-network Direct Connect, Group Connect, Talkgroup calls, and Call Alerts. 䢇 Data services. 䢇 Sending and receiving messages. 䢇 Call timer. 䢇 Sending Call Alerts. 䢇 Call forwarding. Setting Your Phone to Direct Talk Before you and another caller can use Direct Talk, both of your phones must be set to Direct Talk mode. 1. Press M > Direct Talk. 2. Select Go To Direct Talk.
5. Select a code. 6. Press Back (right softkey) to return to the Direct Talk standby screen. Making and Receiving Code Calls in Direct Talk Mode To make a Code call using Direct Talk: 䊳 In Direct Talk mode, press and hold the Direct Connect button. Your phone displays Transmitting, along with the channel and code selected. The tone emitted from your phone when making a Direct Talk call is four beeps and sounds different from the tone heard on Direct Connect calls conducted on the network.
Receiving a Private Direct Talk Call The number or name of the person who initiated the call appears on your display screen. Answer the call in the same way you answer a regular Direct Connect call. A Private Direct Talk call ends a short time after the last party releases the Direct Connect button. The display screen returns to Direct Talk standby mode. Note You do not need to set your phone to Private Only to receive Private calls.
To set the code to Receive All: Making Calls 1. In Direct Talk mode, press Edit (left softkey). 2. Select Code. 3. Select Receive All. 4. Press Back (right softkey) to return to the Direct Talk standby screen. Making Emergency Calls While in Direct Talk Mode If you attempt to make an emergency 911 call while in Direct Talk mode, your phone automatically exits Direct Talk mode and attempts to find a network signal.
Section 2B Using the Settings Menu Settings The Settings menu contains many submenus that let you customize your phone. To access the Settings menu and submenus: ⽧ Using the Settings Menu (page 60) ⽧ Sound Settings (page 65) 1. Press M > Settings. ⽧ Display Settings (page 70) 2. Select the submenu you want.
䢇 䢇 䢇 Clock — controls whether the time and date appear in standby mode; sets time and date format; sets year. Menu View — controls whether the items on your main menu and Java applications menu appear as large icons or a list. Large Dialing — sets large digits to appear in standby mode when you enter a number. Language — sets the language that your phone displays.
䢇 presses. Set to Always to always hear keypad presses; set to Never to never hear keypad presses; set to In Call Only to hear keypad presses only while in a call. Prepend — lets you specify a prefix, such as a country code for international calls, to be automatically added to phone numbers you dial.
䢇 䢇 䢇 䢇 䢇 䢇 Down Key — sets the main menu item you access when you scroll down in standby mode. Left Key — sets the main menu item you access when you scroll left in standby mode. Right Key — sets the main menu item you access when you scroll right in standby mode. Center Key — sets the main menu item you access when you press r in standby mode. Left Sftkey — sets the main menu item you access when you press the left softkey in standby mode.
Security Features Advanced Features The Security menu lets you turn security features on and off and change passwords: 䢇 Phone Lock — turns on a feature that locks your phone: Lock Now takes effect immediately; Auto Lock takes effect when your phone is powered off and then on. An unlock code is required to enable this feature, to unlock the phone, and to set a new unlock code. Contact Nextel Customer Service for your default unlock code.
䢇 Transmitters — controls your phone’s radio transmitters. Selecting Off prevents your phone from making or receiving phone calls, Direct Connect calls, Group Connect calls, or Talkgroup calls, or transferring data. Baud Rate — sets the baud rate at which your phone communicates with a laptop computer or similar device. Sound Settings Ring Tones Ringer types help you identify incoming calls and messages. You can assign ringer types to individual Contacts entries, types of calls, and types of messages.
Assigning a Ring Tone to a Contact You can also assign a ringer to a specific contact entry so you know who's calling without looking at the phone. 1. Press M > Ring Tones. 2. Scroll through the list of ring tones and select the one you want to assign. A sample ringer will sound as you highlight each option 3. Press r or press Assign (left softkey). 4. Select A Contact.... 4. Scroll to view ring tones assigned to features and Contact entries.
3. Highlight any ring tone and press M > Memory Usage. Deleting custom ring tones frees memory. Note Ring tones are stored in your phone using the same memory space used to store messages, voice records, pictures, and Java application data that are stored in your phone’s memory. Deleting or moving some of these other items frees memory for ring tones. Deleting Custom Ring Tones Deleting a ring tone from the list of ring tones deletes it from your phone.
To deactivate Vibrate All: 1. Press and hold the volume key up to unlock vibrate all. 2. Press the volume key up repeatedly to select a volume level. – or – Press M > Ring Tones > Vibrate All. Set this option to Off. These icons indicate how the ringer is set: Ring and Vibrate To set your phone to ring and vibrate when you receive phone calls or Call Alerts: 1. Press M > Ring Tones. 2. Make sure Vibrate All is set to Off. 3. Scroll through the list of ring tones and highlight the one you want to assign.
䊳 Press the volume key up repeatedly to select a volume level. To set your phone to vibrate instead of making a sound for some features but not others: 1. Press M > Ring Tones. 2. Make sure Vibrate All is set to Off. 3. Select Vibrate from the list of ring tones. 4. Select the features you want to set to make no sound. Adjusting the Phone’s Volume Settings Adjust your phone’s volume settings to suit your needs and your environment. 1. Press M > Settings > Volume. 2.
Display Settings 2. Select Wallpaper and press r. (A list of available Changing the Backlight Time Length 3. Select an image and press View (left softkey) to Select how long the display screen and keypad remain backlit after any keypress is made. 1. Press M > Settings > Display/Info > Backlight. 2. Highlight an option, press r, and then choose a setting. For Timer or Java Timer, select a backlight timeout time. 䡲 For Sensor, PTT Backlight, Bluetooth, or Message, select On or Off.
䡲 Icon View to view the main menu as a grid of Icons. Icons animate when they are highlighted. 䡲 List View to display the menu as a list. Changing the Theme Customize your phone’s display appearance by selecting a theme to reflect your personality. 1. Press M > Settings > Display/Info > Theme. 2. Select an option and press r. Changing the Clock Display Select a format for the time and date display and choose whether the time and date appear in standby mode. 1.
Setting Message Notification When you receive a message, your phone notifies you by displaying an icon on your display screen. You can also choose to be notified with a sound while making a phone call. 1. Press M > Settings > Phone Calls > Notifications. 2. Select the and press r. 1. Press M > Messages > M > Setup > Cleanup. 2. Select Inbox or Sent Items and press r. 3. Choose a cleanup option. 4. To automatically delete messages now, press r or press Yes (left softkey).
1. Press M > Messages > M > Setup > Quick Notes or Replies. (The list of preset messages will be displayed.) 2. To add a new message, press New (left softkey) or select [New Quicknote]. 3. Enter your message (see “Entering Text” on page 21), and press r. (Your new message will be added to the end of the list.) To delete a custom Quick Note or Reply: 1. Press M > Messages > M > Setup > Quick Notes or Replies. (The list of preset messages will be displayed.) 2.
When in Transmitters Off mode, your phone’s standby screen displays “Transmitters Off.” Note While powering on your phone, you can turn transmitters off by pressing P for more than five seconds. To restore your phone’s ability to do all these things: 䊳 Set this option to On and then press Yes (left softkey). Note When Transmitters is set to Off, your phone’s Bluetooth capability is disabled, and all active Bluetooth connections are dropped.
Press Search (left softkey). Select Contacts, Recent Calls, or Memo. Select the number you want to enter. Tip If you are entering a Talkgroup number, enter # before the number. 3. Press r. To turn off One Touch Direct Connect: 1. Press M > Settings > DC/GC Options > One Touch DC. Settings 䡲 2. Set this option to Off. Headset Options To set your phone to send a picture: 1. Press M > Settings > DC/GC Options > One Touch DC. 2. Set this option to Send Picture.
Profiles Viewing Profiles To view the profiles stored in your phone: A profile is a group of settings saved together so that you can apply them to your phone easily. A profile contains these settings: 䢇 Ring Tones — sets all options described in “Ring Tones” on page 65, except assigning ring tones to Contacts. 䢇 Display/Info — sets Wallpaper, Theme, Text Size, and Backlight options. See “Display Settings” on page 70. 䢇 Phone Calls — sets Set Line and Auto Answer options.
Temporary Profiles Many of the settings contained in profiles can be set without switching or editing profiles — for example, by selecting Settings or Ring Tones to set options, or by setting the volume of the phone’s ring using the volume controls. If your phone is set to create temporary profiles, a temporary profile is created when you make changes to settings without switching or editing profiles. These stay in effect until you switch profiles or power off your phone.
3. Select Store Changes. Note The temporary profile is stored with the name of the profile it is based on. The profile it is based on, as it existed before you made changes to settings, is gone. Creating Profiles 1. Press M > Profiles. 2. Select [New Profile]. – or – Scroll to any profile, press M, and then select New. 3. Enter the name you want to give the profile, and then press r. 4.
Setting Call Filtering The call filtering setting in each profile lets you control which calls, Call Alerts, and message notifications your phone notifies you of, and which it ignores. 1. While setting options for a profile, select Call Filter. 2. Select a filtering option 䡲 Phone – sets filtering options for phone calls. ● ● ● ● Off – sets your phone to notify you of all phone calls. All – sets your phone to ignore all phone calls.
● ● ● Note Voice Messages – sets your phone not to sound a tone or vibrate when you receive voice messages. Text Messages – sets your phone not to sound a tone or vibrate when you receive text messages. All – sets your phone not to sound a tone or vibrate when you receive any message. When you receive a message you have set not to sound a tone or vibrate, the message notification screen still appears. 3. Press Done (right softkey).
8. If the number key you chose is already assigned to a shortcut, a prompt appears asking if you want to replace the existing shortcut. 䡲 Press Yes (left softkey) to replace the existing shortcut. 䡲 Press No (right softkey) if you want to keep the existing shortcut and assign another number key to the shortcut. Using a Shortcut To access a shortcut using the shortcut number: 1. From standby mode, press M. 2. On your keypad, press the number assigned to the shortcut.
To change the number or voice name assigned to a shortcut: 1. Press M > Shortcuts. 2. Highlight any shortcut. 3. Press Edit (left softkey). 4. With Key or Voice highlighted, press r to change assignments. 5. Press Done (right softkey). Deleting Shortcuts To delete a shortcut: 1. Press M > Shortcuts. 2. Scroll to the shortcut you want to delete. 3. Press M and then select Delete. 4. Press r or press Yes (left softkey) to confirm. To delete all shortcuts: 1. Select M > Shortcuts. 2.
Display Language You can choose to display your phone’s on screen menus in English, Spanish, or French. Setting Prepend Dialing The Prepend feature lets you set a prefix to be added to the beginning of all dialed numbers, such as a country code for international calls. 1. Press M > Settings > Phone Calls > Prepend. 2. Select Prepend > On. 3. Enter a prefix in the Number field (such as +1 for international calls) and then press r. To deactivate this feature, select Off during step 2 above.
Section 2C Security SIM Card Security Important Except for making emergency calls, your phone does not function without the SIM card. ⽧ SIM Card Security (page 84) SIM Card’s PIN ⽧ Your Phone’s Lock Feature (page 86) ⽧ Your Phone’s Keypad Lock (page 86) ⽧ Resetting Your Phone (page 87) ⽧ GPS Privacy Options (page 88) ⽧ Java Applications & GPS Security (page 89) You can protect access to your phone by using the SIM card’s PIN (Personal Identification Number).
1. Turn on your phone. 2. When the SIM PIN screen appears, enter your SIM PIN and press Ok (left softkey). Important If you enter your PIN incorrectly three times, your SIM card is blocked. See “Unblocking the PIN” on page 85 Changing the PIN Note SIM PIN must be turned on in order to access this feature. Unblocking the PIN If you enter your PIN incorrectly three times, your SIM card is blocked. To unblock your SIM card, you must contact Nextel Customer Service to get a PIN Unblock Code (PUK).
Your Phone’s Lock Feature 2. Select Unlock Code, and then enter your current Locking Your Phone 3. Enter and reenter your new lock code, pressing When your phone is locked, you can only make calls to 911. To lock and unlock your phone, you must enter your phone’s four-digit lock code. If you do not know your phone’s lock code, try 0000; if this does not work contact Nextel Customer Service for assistance. 1. Press M > Settings > Security. 2.
To lock the keypad: If you press a key while the keypad is locked, instructions for unlocking the keypad display briefly. To unlock the keypad: 䊳 Resetting Your Phone From standby mode, press M and then press *. From standby mode, press M and then press *. To automatically lock the keypad if there has been no activity for a specified time. 1. Press M > Settings > Security > Keypad Lock. 2. To lock the keypad immediately, select Lock Now.
Resetting All Selecting Reset All resets phone settings and clears all phone data, including Contacts, History, Scheduler, and Messaging. 1. Press M > Settings > Advanced > Reset Defaults > Reset All. 2. Enter your security code and press Ok (left softkey). 3. Read the prompt and press Yes (left softkey) to complete the reset. (Press No [right softkey] to cancel.
To prevent your GPS privacy settings from being altered without your knowledge, your GPS privacy option can be protected by a PIN. When you receive your phone, the GPS security feature is turned off, so you do not have to enter a GPS PIN to access your GPS privacy options. If you turn this feature on, you will be required to enter a GPS PIN to access your GPS privacy options. To turn the GPS Enabled security feature on or off: 1. Press M > Settings > Security > GPS PIN. 2. Select On or Off. 3.
Setting Privacy for All Java Applications These options control the privacy of all Java applications on your phone: 䢇 Restricted — No Java or similar software applications may access the location of your phone. However, location information may still be available to the phone’s owner, fleet manager, or account administrator. 䢇 Unrestricted — All Java applications may access the location of your phone, without notifying you.
1. Press Grant (left softkey). The application accesses your phone’s location. 2. Select the granting option you want: 䡲 Always — If the application requests access to the location of your phone again, the request is granted without notifying you. 䡲 For this session — If the application requests access to the location of your phone again before you power off your phone, the request is granted without notifying you.
Section 2D About Recent Calls Recent Calls The Recent Calls list displays the last 20 numbers (or Contacts entries) for calls you placed, accepted, or missed, and for Call Alerts you have received. It also displays My Info and contact information sent to you from other phones. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list.
Note The Direct Connect number Contacts type icon appears when you receive a Direct Connect call or Call Alert, even if the number is not stored in Contacts. The Recent Calls list records only calls that occur while the phone is turned on. If a call is received while your phone is turned off, it will not be included in the phone’s Recent Calls list. Call Alerts you have received appear as Direct Connect calls.
This icon j appears with My Info sent from other phones on the Recent Calls list, along with the Direct Connect number of the person who sent the information. When you select My Info from other phones to view its details, you see all the information sent. If you receive My Info from the same phone more than once, only the most recently sent version appears in the Recent Calls list. Contact Information From Other Phones The Recent Calls list displays contact information sent from other phones.
Note The Recent Calls list records only calls that occur while the phone is turned on. If a call is received while your phone is turned off, it will not be included in the phone’s Recent Calls list. If you return a call from the voicemail menu, it will not be included in your phone’s Recent Calls list. To view the Recent Calls list: 1. Press M > Recent Calls. 2. Scroll through the list. To view the details of an item on the list: 䊳 From the Recent Calls list, highlight an entry and press r.
Saving Items From Recent Calls 1. From the Recent Calls list, scroll to or select the item you want to store. 2. Press Save (left softkey). – or – If Save is not one of your options, press M and then select Save or Update Contacts. Tip If the item you want to store is a call, Save does not appear if the number is already stored in Contacts. 4.
3. If you are certain you want to erase all Recent calls, Recent Calls press Yes (left softkey). Press No (right softkey) to cancel. Prepending a Phone Number From Recent Calls If you need to make a call from the Recent Calls List and you are outside your local area code, you can add the appropriate prefix by prepending the number. 1. Select a Recent Calls entry and press M > Add Prepend. 2. Enter the prefix and press N to call the number. Section 2D.
Section 2E About Contacts Contacts Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses.
Each number or address stored must be assigned a Contacts type: A Mobile phone number B DC Direct Connect number C Work1 phone number D Work2 phone number E Home phone number F Email email address G Fax phone number H Pager phone number I Talkgroup Talkgroup number S Group Group J IP IP address ( Other phone number Your phone can store up to 600 Contacts entries. Each contact entry can store up to 10 numbers or addresses, and each entry’s name can contain 20 characters.
to the Contacts list or press P to return to standby mode. 5. To store a number or address: Select Name. Enter the name. When you are finished, press r. Select the # field (or ID for an email address, or IP for an IP address). 䡲 Enter the number or address. For phone numbers, use the ten-digit format. For Direct Connect numbers, be sure to include the asterisks (*). 䡲 For email addresses, see “Entering Text” on page 21. 䡲 When you are finished, press r. 3.
8. If you want to create a voice name for a phone number, select Voice Name. As directed by the screen prompts, record the name you want to assign to the number. Speak clearly into the microphone. 9. When you are finished, press Back (right softkey). 10. If you want to add more numbers or addresses to the entry: 䡲 Scroll past the information you already entered. 䡲 Enter the additional information for the entry using step 2 through step 6. You must assign a name to the entry, if you have not already. 11.
5. If you want to add more information to the entry, follow the applicable instructions in “Creating Contacts Entries” on page 99. 3. Press r to display the entry, and then scroll up or down to view all information stored for the entry. Tip To view more entries, continue scrolling. 6. Press Save (left softkey). Viewing Contacts 1. Press M > Contacts, and then either scroll to the entry you want to view. – or – Enter the first letter of a name (such as “d” for “Dave”).
1. Display a Contacts entry. (See “Viewing Contacts” on page 102.) Editing Entries Contacts Adding a Number or Address to an Entry 1. Press M > Contacts and scroll to the entry you want to edit. 2. Press Edit (left softkey). 2. Press M > Edit. – or – 3. Scroll to the number type field above an open If Edit is not one of your options, press M and then select Edit. number and press the navigation key right or left to select a number type. 4.
Deleting a Number or Address 1. Press M > Contacts and scroll to the entry containing the number or address you want to delete. 2. Scroll left or right to display the Contacts type for the number you want to delete. 3. Press M. 4. Select Delete Number. 5. Press r or press Yes (left softkey) to confirm. Note If an entry contains only one number or address, deleting the number or address deletes the entry. Assigning Speed Dial Numbers Your phone can store up to 600 phone numbers in speed dial locations.
press r. 5. Press Back (right softkey) to return to the Contacts menu and then press Save (left softkey) to save the changes. Note If you attempt to assign an already in-use speed dial location to a new phone number, a message will appear asking if you wish to replace the existing speed dial assignment. Press Yes (left softkey) to assign the location to the new phone number and delete the previous speed dial assignment.
Section 2F Datebook Tools Datebook stores up to 250 events. You can store events over a thirteen month period — twelve months after and one month before the current date.
䢇 䢇 䢇 䢇 䢇 A date — The date automatically assigned to an event is the date that was highlighted or selected when you began creating the event. You can change this date before storing the event. A repeat — Lets you store the event as a recurring event. A reminder — If an event has a start time, you can set Datebook to remind you that the event is going to start. A ring tone for the reminder. A profile that your phone uses during the event. A Java application that starts when the event starts.
To highlight a day in month view: 䊳 Enter the date using the keypad. To go to today’s date: 1. While viewing Datebook, press M. 2. Select Go To Today. To go to any date in Datebook: 1. While viewing Datebook, press M. To create a Datebook event: 1. While viewing datebook, press New (left softkey). – or – In day view, select [New Event]. 2. To assign a subject to the event, select Subject and: 䡲 Enter the name. – or – 2. Select Go To Date.
Location and: 䡲 Enter the location. – or – Enter a phone number, Direct Connect number, or Talkgroup number. After the event is stored, you can call this number. 䡲 When you are finished, press r. 4. The start time automatically assigned to an event is the beginning of the day. If you want to change the start time or assign no start time: 䡲 Select Start. 䡲 Enter the start time you want. 5.
9. If you have created a reminder for the event and want to set the ring tone for that reminder: 䡲 Select Ring Tone. 䡲 Select the ring tone you want from the ring tones stored in your phone. 10. If you want to assign a profile that your phone is switched to while the event is occurring: Select Profile and then select a profile. (Your phone switches to this profile when the event starts and switches back to the previous profile when the event ends.) 䡲 11.
For Events With Java Applications 2. Select the event and press M > Delete. If you assigned a Java application to start when the event starts, you can start the application when you get the reminder. 3. If the event is not a recurring event, press r or To start the application: 1. Select the day the event occurs. press Yes (left softkey) to confirm. – or – If the event is a recurring event: Select This Event Only to delete only the event selected in step 2.
Making Calls From Datebook Making Calls From Datebook Reminders To make a phone call: To call a number: 1. Highlight or select the event containing the number you want to call. 2. Press N or press M and then select Call # in Event. To make a Direct Connect call or Talkgroup call: 1. Highlight or select the event containing the number you want to call. 2. Press the Direct Connect button.
䢇 䢇 䢇 Delete After — sets the amount of time Datebook waits to delete an event after it occurs. Time Shift — lets you shift the times of all Datebook events. This is useful if you are traveling to a different time zone. Alert Timeout — sets the amount of time a tone continues to sound when you receive a message notification, Call Alert, or Datebook reminder. Clock — controls whether the time and date appear in standby mode; sets time and date format; sets year.
Suspending Applications Ending Applications When you suspend an application, it does not stop running. It goes to the background so that you can run another application in the foreground. To end an application: To suspend an application: 䊳 Press P. To view your suspended applications: 䊳 Press M > Java Apps and select Suspended Apps. You can have up to three applications running at one time — one running in the foreground and two in the background.
them exit, press EndNow (left softkey) and then press Finish (right softkey). Downloading Applications If you want to run more Java applications, you can download them into your phone. To access a catalog of items available for purchase and download: 䊳 Press M > Java Apps > Buy Games&Apps or Download Apps. 2. Scroll to the application you want to delete. 3. Press M > Deinstall. 4. Press r or Yes (left softkey) to confirm. 5.
Deleting Java applications frees memory. Note Java application data is stored in your phone using the same memory space used to store messages, voice records, pictures, ring tones, and wallpaper images. Deleting some of these other items frees memory for Java applications. Shortcuts on the Main Menu When you install an application, you can create a shortcut to the application on the main menu. To create a shortcut to an application that is already installed: 1.
When you download multimedia content available online, such as Java applications, these items may be subject to DRM restrictions. DRM, or digital rights management, is a system that defines how copyrighted multimedia content can be distributed and used. DRM limits items to time-based or count-based usage settings. Time-based settings let you use the given item for a specified interval. Count-based settings let you use an item for a specified number of times after you download it or for unlimited use.
2. Highlight the DRM item you want to renew. 3. Press Renew (left softkey) or press M and then select Renew. 4. Select the link to the page where you purchased the item and then follow the vendor’s instructions for purchasing an additional license. Deleting Items If you delete a DRM item that you purchased from Nextel from your phone, you will have to purchase it again to download it. Note You cannot delete items that are DRM locked.
You can also use the GPS feature to view your approximate location. Location information appears on the phone’s display. Java applications loaded on your phone can also request your location. If your phone is connected to a laptop computer or similar device, software running on that device can request your location. To protect your privacy, you can control whether these requests are granted. See “GPS Privacy Options” on page 88.
provided in “Enhancing GPS Performance” on page 122. While the GPS feature of your phone can be a valuable navigational aid, it does not replace the need for careful navigating and good judgment. Never rely solely on one device for navigation. Remember that the accuracy of the location information and the time needed to obtain it will vary depending on circumstances, particularly the ability to receive signals from adequate numbers of satellites.
Note If you are concerned about whether your local 911 emergency response center is equipped to receive GPS location information, contact your local authorities. In general, if your phone has access to signals from more GPS satellites, your location will be determined faster and more accurately than if your phone has access to signals from fewer GPS satellites.
getting the best location calculation, see “Enhancing GPS Performance” on page 122. The Position screen displays the updated information. To cancel a location calculation before it is completed: 䊳 Press Cancel (right softkey) to return to the Position screen or press P to return to standby mode. Each time approximate location of your phone is calculated, the latest location information is stored in your phone and remains there even when your phone is powered off.
䢇 Stand still. If possible, stand still until your phone is finished determining your location. Moving your phone at a walking pace while your phone is calculating your approximate location may substantially decrease GPS performance. In a car. When using the GPS Enabled feature in a car, position your phone so that the GPS antenna has good access to GPS signals through the car’s windows. Typically, the GPS antenna has best access to GPS signals in a car when placed near a window.
every second and the map software displays your changing location on its map. 2. With the phone’s display facing up, insert a micro-USB data cable into the charger connector. See “Enhancing GPS Performance” on page 122 for more details on obtaining good location information. Note Because your phone is continuously determining your location, using the GPS feature of your phone with map software uses the phone’s battery power quickly.
1. Press M > GPS > Interface. 2. Set NMEA OUT to On. Your phone is now sending location data to your laptop or other device. To stop your phone from sending location data to your laptop or other device: 䊳 Set NMEA OUT to Off. Each time you power your phone on, NMEA OUT is automatically set to Off. To view the memo later: 䊳 Press M > Memo. To delete the memo: Tools To set your phone to send location information to your laptop or other device: 1. Press M > Memo. 2.
To store the memo number to Contacts: Voice Records 1. Press M > Memo and then press M. 2. Select Store to Cntcs. 3. To store the number as a new entry, select [New Contact]. – or – To store the number to an existing entry, select the entry. 4. With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign the number. 5. If you want to add more information to the entry, follow the applicable instructions in “Creating Contacts Entries” on page 99. 6.
1. Press M > VoiceRecord. 2. Select the voice record you want to play. 3. To stop the voice record while it is playing, press r. Tip To fast forward, scroll right. To rewind, scroll left. To pause or resume, press any number key. 2. Scroll to an unlocked voice record and press M > Delete. 3. Press r or Yes (left softkey) to confirm. To delete all voice records: 1. Press M > VoiceRecord. 2. Scroll to any voice record and press M > Delete All. 3. Press r or Yes (left softkey) to confirm.
Managing Memory Media Center To view the amount of memory available for voice records: 1. Press M > VoiceRecord. 2. With [New VoiceRec] highlighted, press Memory (left softkey). To free more memory by deleting all unlocked voice records: 1. From the voice records memory screen, press Delete (left softkey). 2. Press r or Yes (left softkey) to confirm.
1. Press M > Media Center. 2. Scroll to view the items in the Media Center. Keeping the Last Filter Setting You can set the Media Center to show all items every time you access it or to keep the filtering setting you had when you last viewed it. Choosing Thumbnail View or List View 1. Press M > Media Center > M > Setup > You can set the Media Center to show a thumbnail of each picture as you view the list of items or show the list of items without thumbnails. 2.
2. Select By Time or By Name. When you receive your phone, the Media Center is set to sort items by time. Forward Locked Items Some items saved to the Media Center from MMS messages or by downloading may be forward locked. Forward locked items are usually copyright protected, and you cannot share them with anyone. You cannot remove forward locking from an item. When you view items in the Media Center, one of these icons appears next to each forward locked item: O Forward locked.
Sending With Bluetooth To view a picture, select it from the list of items in the Media Center. You must set up your phone to send items with Bluetooth before sending a picture. See “Bluetooth” on page 138. If your phone is set to show thumbnails, a thumbnail of each picture appears next to the picture in the list of items. If your phone is not set to show thumbnails, this icon g appears next to the picture. To see a larger or smaller view of the picture you are viewing: 1. Press M and then select Zoom.
Playing Audio Files 䊳 To play an audio file, select it from the list of items in the Media Center. This icon a appears next to each audio file in the list of items. Tip When viewing the list of items in the Media Center, you can scroll left or right, or press * or #, to change the type of media that is displayed in the list. 2. Create and send the message. (See “Multimedia Messages” on page 154.) The audio file you selected is automatically included as an attachment. Renaming Items 1.
R Locked. ] Forward lock and locked. Deleting All Items You can delete all unlocked items currently in view, depending on how Media Center filtering is set. See “Filtering by Media Type” on page 129. If filtering is set to show all types of Media Center items, all unlocked items are deleted. Deleting Items 1. Press M > Media Center.
Tip Items accessible through the Media Center that are stored in your phone’s memory use the same memory space used to store messages, Java application data, and voice records created when your phone is in a call. Deleting some of these other items frees memory. Call Timers Call timers measure the duration of your phone calls, Direct Connect, or Group Connect calls, and the number of kilobytes sent and received by your phone: 䢇 Last Call — displays the duration of your most recent phone call.
Taking Pictures Camera ⽧ Taking Pictures (page 135) Taking pictures with your phone’s built-in camera is as simple as choosing a subject, pointing the lens, and pressing a button. You can activate the phone’s camera mode whether the phone is open or closed. ⽧ Camera Options (page 136) To take a picture with the phone open: Your phone’s built-in camera gives you the ability to take full-color digital pictures, view your pictures using the phone’s display, and instantly send them to family and friends.
● ● ● ● ● ● Send Via... to send the picture via Bluetooth, PTT, or MMS (multimedia messaging). (See “Sending Media Center Items” on page 147 for Bluetooth, or See “Creating and Sending Messages” on page 154 for MMS.) Save [OK] to save the picture to the Media Center. Set As Wallpaper to use the picture as your phone’s Wallpaper. Media Center to save the picture to the Media Center and open the Media Center. Memory Usage to see the amount of used and available memory on your phone.
To cancel the self-timer after it has started: Press Cancel (right softkey). Camera 䊳 Camera Setup Set your camera’s resolution and default size in the Camera Setup menu. 1. Press M > Camera > M > Camera Setup. 2. Select an option and press r. Ask for Name: Select On for the camera to prompt you to enter a new File Name when saving a camera picture. 䡲 Shutter Sound: Highlight Sound1 or Sound2 and press r. 䡲 Default Size: Select 640x480, 320x240, 160x120, 128x96 or128x160 and press r.
Section 2H Turning Bluetooth On and Off Bluetooth By default, your device’s Bluetooth feature is turned off. Turning Bluetooth on makes your phone “discoverable” by other in-range Bluetooth devices. ⽧ Turning Bluetooth On and Off (page 138) ⽧ Using the Bluetooth Menu (page 139) ⽧ Pairing Bluetooth Devices (page 140) ⽧ Transferring Items Via Bluetooth (page 146) Your phone features built-in Bluetooth technology, allowing you to share information more easily than ever before.
The Bluetooth status indicators on your phone’s display and external display screen, and the Bluetooth LED (page 6) above the external display on the front of the closed phone shows your Bluetooth connection status at a glance: No LED or Status Indicator – Bluetooth is disabled (default status) B – Status indicator will blink and LED will be solid when the phone is in discovery mode. B – Status indicator will be solid and LED will blink when connected to a Bluetooth device.
Pairing Bluetooth Devices Paired Devices The Bluetooth pairing process allows you to establish trusted connections between your phone and another Bluetooth device. When devices are paired, a passkey is shared between devices, allowing for fast, secure connections while bypassing the discovery and authentication process. To pair your phone with another Bluetooth device: 1. Press M> Bluetooth > Link to Devices. (Your phone will display a list of discovered in-range Bluetooth devices.) 2.
Renaming Your Phone You can configure the following aspects of Bluetooth: 䢇 Power. 䢇 Device name. 䢇 Find Me duration. Bluetooth devices are listed by their Bluetooth addresses unless you name them. Your i776 phone comes with a default device name of “Motorola Phone.” it is recommended you rename your i776 phone with a unique device name. Turning Bluetooth On or Off You can turn power to your phone’s Bluetooth feature on or off. While Bluetooth power is on, your phone can communicate with other devices.
Accessing Bluetooth 䊳 Press M > Bluetooth. – or – While in a call, press M and select Use Bluetooth. Note If Bluetooth power is set to Off on your phone, you will be prompted to turn power on in order to use Bluetooth. Making a Bluetooth Connection The following sections cover how to connect your phone to another Bluetooth device. Note Some Bluetooth devices only have full functionality when DTMF dialing is set to On. See “Phone Calls Features” on page 61.
To stop the search and return to the previous screen, press Cancel (right softkey). Bluetooth Bonds (Pairing) A bond is an encryption key that is generated when two Bluetooth devices exchange a common PIN. This key verifies the identity of each device, and encrypts any data transferred between the devices. Once the PIN is exchanged, the devices do not have to be in discoverable mode in order to exchange information. You only need to create a bond once between two devices.
To create a bond between your phone and another device: 1. Press M > Bluetooth. 2. If you want to create a bond and connect with the given device, select Hands Free > [Find Devices]. – or – If you want to create a bond to have it available for future use, select Link to Devices. 3. Select the device you want. 4. Press Yes (left softkey) if you are prompted to do so. 5. Enter a PIN if you are prompted to do so, and then press Ok (left softkey). 6. If necessary, enter the same PIN for the other device.
1. Press M > Bluetooth > Hands Free. 2. Press Drop (left softkey) and then press Yes (left softkey). Note Pressing No (right softkey) when prompted exits the menu without disconnecting the device. Setting Device Details Viewing Device Details To view the name and the access setting of a device: 1. Press M > Bluetooth > Device History. 2. Select the device you want. Editing Device Names To edit a device name so the device is easier to identify. 1. Press M > Bluetooth > Device History.
Editing Device Access Settings 1. Press M > Bluetooth > Device History. Files sent or received may be up to 200 KB. Note 2. Scroll to the device you want to set access for. 3. Press Edit (left softkey) or press r. 4. Select Access. 5. Select Ask or Automatic and press r. This measurement represents optimal conditions. Actual conditions may require you to position your phone closer. You can only connect your phone to one device at a time. Note Go to www.nextel.
1. Press M > Datebook. 2. Highlight the event you want to send. 3. Press M and then select Send Via.... 4. For a repeating event, select This Event Only to send only this occurrence or Repeat Event to send all instances. 5. Select Bluetooth. 6. Select the device you want to transfer to. – or – Search for the device you want to transfer to by selecting [Find Devices]. 7. If prompted, bond with the device. Your phone connects to the device and transfers the event.
Receiving Items Viewing and Storing Received Items You receive a prompt when your phone has an incoming transfer. After an incoming transfer is complete, your phone translates the item. The item appears on your phone’s display. 䊳 Press Accept (left softkey) to accept the transfer or press Reject (right softkey) to reject the transfer. Canceling Transfers You can cancel a transfer while the transfer is in progress. 1. Press Cancel (right softkey). 2.
Section 3 Service Features
Section 3A Service Features: The Basics Now that you’ve explored your phone’s fundamentals, it’s time to learn about the calling features that enhance your service. This section outlines your basic wireless service features. Message Center ⽧ Message Center (page 150) The message center manages your messages.
䊳 Receiving Messages Service Features Accessing the Message Center Press M > Messages. Message Center Options After accessing the message center, select the option you want: 䢇 [Create Mesg] — begin creating an MMS message. 䢇 Voice Mail — access voicemail messages you have received. 䢇 Inbox — access MMS messages you have received. 䢇 Drafts — access MMS messages you have created and saved but not sent. 䢇 Sent Items — access MMS messages you have created and sent.
If you dismiss the notification, the message is not deleted. It can be accessed through the message center. If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message, you dismiss the notification, or the alert time-out expires. The message LED will be activated when you receive a new message alert. It will remain on until there are no unread items in the Message Center or until it reaches the 30 minute timeout.
Tip To receive voicemail messages, you must first set up your voicemail box. If you are bringing your phone number from another carrier, we suggest you set up your voicemail box after the number you brought to Nextel is active on your Nextel phone and your temporary phone number is deactivated. If you set up your voicemail box prior to this, all messages and all settings (including your greeting and password) will be lost when the number you have brought to Nextel becomes active.
Multimedia Messages Multimedia Messaging Service (MMS) lets you send and receive messages that may include text, pictures, and audio recordings. You can send and receive these messages from your phone, through any email account, and from www.nextel.com. Your MMS address is PTN@messaging.nextel.com. Your PTN is your ten-digit Nextel Personal Telephone Number. Note Most common phone-to-phone text messages are sent and received as MMS messages on your i776.
䢇 䢇 䢇 䢇 䢇 Attach — one or more attachments. These may be pictures, ring tones, or audio files, including voice records that you create while creating the message. Cc — the phone numbers or email addresses of more recipients. Auto Replies — lets you insert replies the recipient can choose from when replying to your message, if the recipient’s phone also has this feature. Priority — sets the priority of the message to normal or high.
To cancel the message at any time: 䊳 At the message screen, press Cancel (right softkey). 2. To address the message: 䡲 – or – Press P to cancel the message and save it in Drafts. – or – Creating a Message Press Contcs (left softkey) or M > Recent Calls to select recipients from Contacts or Recent Calls. Highlight recipient(s), press r to select them (a checkmark will appear next to the entry), and then press Done (left softkey). 1. Press M > Messages > [Create Mesg].
● ● ● Enter text from the keypad. Use a Quick Note. See “Quick Notes” on page 160. Insert a picture, a ring tone, or an audio file. See “Inserting Pictures, Audio Files, and Voice Records” on page 160. When you are finished, press r. 4. If you want to send the message now, press Send (left softkey). – or – If Send is not one of your options, press M and then select Send. – or – To fill in more message fields, see “Adding More Message Options” on page 157.
6. If you want to receive a report confirming that your message was delivered, select Report > On Delivery. 7. If you want to set a date after which attempts to deliver the message end: 䡲 Select Valid Until, select a date by scrolling or entering numbers, and press r. 䡲 To set no date, press No Date (left softkey). 8. To send the message, press Send (left softkey). – or – If Send is not one of your options, press M and then select Send.
these phrases. – or – Select [Create Reply] to begin the body of your message without using any of these phrases. 4. Edit any message fields you want to change and then press r. 5. Press Send (left softkey). To begin a message from Contacts: Service Features 3. A list of short phrases is displayed. Select any of 1. From the Contacts list, scroll to an entry. 2. Scroll left or right to view the Contacts types until you see the icon for the phone number or email address you want to send a message to. 3.
To begin a message from standby mode: 1. Enter a phone number. 2. Press M and then select Create. 2. Select the Quick Note you want to insert into the message. Tip To begin a message from the Media Center: 1. From the Media Center, scroll to or select a picture or To create new Quick Notes to use in later messages, see “Customizing MMS” on page 169. audio file. 2. Press Send (left softkey). 3. Create and send the message. The file you selected is automatically included as an attachment.
You can insert pictures from Media Center. Pictures that you download to your phone or receive in a message may be forward locked, meaning they cannot be included in a message. Note If this icon ] appears next to a picture, you cannot send it in a message. 1. While you are filling in the Mesg field, press M. 2. Select Add Picture. A list of pictures that can be included in a message appears. 3. Select the picture you want to insert. 2. Select Insert Audio.
Removing an Inserted Item To remove an item inserted into the body of the message you are creating: 1. Select the Mesg field and highlight the item you want to remove. 2. Press Delete (right softkey). Note You can also attach items to messages by selecting MORE and then selecting Attach. Sending a Draft 1. Press M > Messages > Drafts. 2. Scroll to a draft and press M > Send. Editing a Draft 1. Press M > Messages > Drafts. 2. Select the draft you want to edit. 3.
1. Press M > Messages > Sent Items. 2. Scroll to a message and press Resend (left softkey). M Draft. Note w High priority. L Attachment. If your message was sent successfully, Resend will not appear as an option. Deleting Sent Messages Service Features Drafts Icons 1. Scroll to or view a message and press Delete (left y High priority with an attachment. Sent Items Messages you have sent or tried to send are stored in Sent Items. softkey). 2. Press r or press Yes (left softkey) to confirm.
Receiving a Message Embedded Objects and Attachments When you receive an MMS message, a message notification appears on the display. Messages may contain pictures or audio recordings as part of the body of the message or as attachments. To view the message: If a message contains pictures or audio recordings in the body of the message, highlight each picture or audio recording to view or play it. 1. Press r or press Read (left softkey). The message is downloaded from the message server. 2.
Your phone can receive MMS messages containing slide shows. Viewing Received Messages From the Message Center Service Features Viewing a Slide Show 1. Press M > Messages > Inbox. A slide show may contain a series of pictures that display in sequence. It may also include one or more audio recordings. 2. Select the message you want to read. If you have When you view a message containing a slide show, this icon i appears. 3.
Inbox Icons Actions for Received Messages u Unread message. Deleting T Read message. To delete unread messages: r Reply sent. 1. Scroll to a message and press Delete (left softkey). N Forwarded. 2. Press r or press Yes (left softkey) to confirm. O Locked. w High priority. L Attachment. x Locked, with an attachment. z High priority and locked. y High priority with an attachment. { High priority and locked, with an attachment. To delete read messages: 1.
When you lock a message, it cannot be deleted until you unlock it. 1. Scroll to or view a message. 2. Press M and select Lock Message or Unlock Message. Calling a Number in a Message If a message you receive contains a phone number, Direct Connect number, or Talkgroup ID, you can call or send a Call Alert to that number. These numbers may appear in the From field, the To field, the Cc field, the subject line, or the body of the message. To make a phone call to a phone number in a message: 1.
Storing Message Information to Contacts Going to a Web Site If a message you receive contains a phone number, Direct Connect number, Talkgroup ID, or an email address, you can store this information to Contacts. If a message contains one or more Web site URLs, you can go to the Web site. These numbers may appear in the From field, the To field, the Cc field, the subject line, or the body of the message. 2. Highlight a URL and then press M > Go To Website. 1. View the message. 2.
To save the pictures in a slide show: 1. View the message. 1. View the slide show. 2. Highlight an attachment and then press M > 2. When the picture you want to save appears, Save Attachment. Deleting Attachments 1. View the message. 2. Highlight an attachment and then press M > Del Attachment. 3. Press r or press Yes (left softkey) to confirm. Saving Slide Shows When viewing a slide show in a message you have received, you can save the parts of the slide show.
䢇 䢇 䢇 䢇 䢇 䢇 Signature — Enter text here to create a signature. Your signature is text that is automatically inserted at the end of all messages you create. You can edit the text before sending the message. Quick Notes — lets you create new Quick Notes and edit or delete Quick Notes you have created. Replies — lets you create new reply phrases and edit or delete reply phrases you have created. Cleanup — controls how long messages remain in the Inbox and Sent Items before they are deleted.
You can delete only Quick Notes and reply phrases you have created. To delete a Quick Note or reply phrase: 1. From the Setup menu, select Quick Notes or Replies. 2. Scroll to a Quick Note or reply phrase. 3. Press Delete (left softkey) and then press r or press Yes (left softkey) to confirm. To delete all Quick Notes or all reply phrases: 1. From the Setup menu, select Quick Notes or Replies. 2. Press M and select Delete All. 3. Press r or press Yes (left softkey) to confirm.
To set the cleanup option for Sent Items: 1. From the Setup menu, select Cleanup > Sent Items. 2. Choose a cleanup option. Managing Memory All messages in the Inbox, Drafts, and Sent Items share the same memory space. 3. To automatically delete messages now, press r Note or press Yes (left softkey). To delete messages later, press No (right softkey).
Messages are stored in your phone using the same memory space used to store Java applications data, voice records, ring tones, pictures, and wallpaper images. Deleting some of these other items frees memory for messages. Deleting Multiple Messages You can delete read, unlocked messages from the Inbox, messages in Drafts, or successfully sent messages in Sent Items in groups or all at once. To delete more than one message: 1. Scroll to or view a message. 2. Press M and then select Delete Multiple. 3.
Accessing Text Messages 䊳 When you receive a text message, an alert is displayed on your phone’s screen. Press Read (left softkey) to display the message. Use your navigation key to scroll down and view the entire message. Caller ID Blocking Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, follow these steps.
1. Press P. Your phone rings with the second call. 3. Set this option to Off. Tip 2. Answer the second call. To decline the second call: 䊳 Press No (right softkey). If you subscribe to voicemail, the call is forwarded to your voicemail box, unless you set Call Forward for If Busy to a different number. Tip For those calls where you don’t want to be interrupted, you can temporarily disable Call Waiting by pressing *70 before placing your call.
To make the call on hold active and put the active call on hold: 䊳 Press Switch (right softkey). Making a Three-Way Call To merge two calls into a three-way call: 1. Place or receive a phone call. 2. While the call is active, press M. 3. Select 2nd Call. This puts the call on hold. 4. Enter the second phone number you want to call. With Three-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls. 1.
When you set your phone to forward all calls, an icon appears in the top row of the display: G Phone line 1 is active; calls to phone line 1 are being forwarded. I Phone line 1 is active; calls to phone line 2 are being forwarded. H Phone line 1 is active; calls to phone lines 1 and 2 are being forwarded. J Phone line 2 is active; calls to phone line 1 are being forwarded. L Phone line 2 is active; calls to phone line 2 are being forwarded.
Turning Off Call Forwarding If you do not want all your calls forwarded, turn the feature off: To forward missed calls: 1. Press M > Call Forward > Forward > Detailed. Note 1. Press M > Call Forward > To. 2. Set this option to Off. All your calls are now sent to your phone. Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voicemail.
If Unreachable. 7. When you are finished, press Back (right softkey). Viewing Call Forwarding Settings 1. Press M > Call Forward > Forward > All Calls. 2. With To highlighted, press Status (left softkey). Making International Calls Your service default is “International Calls Restricted.” Contact Nextel Customer Service to obtain international dialing access. Calls placed between the United States and Canada do not require an international access code. Special Dialing Codes Service Features 6.
Note Using 711 to reach Telecommunications Relay Service may not be available in all areas. To enable TTY mode: 1. Press M > Settings > Phone Calls > TTY. 2. Press and r select On to enable TTY mode. Nextel Phone Services Contact Nextel Customer Service to obtain these services or for additional information: Note Some services are not available outside of the continental United States. 3.
To set the active line (primary or alternate): 1. Press M > Settings > Phone Calls > Set Line. 2. Select the phone line you want to be the active line. When incoming calls are made to a non-active line, these calls will be sent to voicemail without ringing. See “Call Forwarding” on page 176.
Section 3B Using the Web Browser Data Services Navigating the Web from your phone is easy once you get the hang of it. Opening the Browser ⽧ Wireless Data Services (page 182) ⽧ Downloading Content (page 185) ⽧ Using Your Phone as a Modem (page 185) Data services offers easy and amazing features you will really use. These features – including messaging and portable Web access – let you have fun, stay in touch, and stay informed no matter where you go on the Nextel National Network.
Help – Displays online help. Creating a Bookmark Bookmarks allow you to store the address of your favorite Web sites for easy access at a later time. 1. Go to the Web page you want to mark. 2. Press and hold M to open the browser menu. 3. Select Mark page and press r. 4. Confirm or edit the bookmark name, highlight Save, and then press r to save the bookmark. Note Bookmarking a page does not store the page contents, just its address. Some pages cannot be bookmarked.
Deleting a Bookmark Reloading a Web Page 1. From the home page, select Your Bookmarks. 1. Press and hold M to open the browser menu. 2. Highlight a bookmark and press Menu (right 2. Select Advanced > Reload. (The browser will reload softkey) > Delete. 3. Press Yes (left softkey) or press r to confirm the deletion. Tip To return to the home page from any other Web page, press P. the current Web page.
Using Your Phone as a Modem Your phone arrives with Java applications and games loaded and ready to install. You can download and install more Java applications. For more information on Java Security, see “Setting Privacy for Each Java Application” on page 91. You can use your phone’s data connection as a modem for a laptop, handheld device, or desktop computer. Check the Downloads menu option on your phone for a catalog of items available for purchase and download.
To connect your phone for use as a modem: 1. Pull and rotate the connector cover. 2. Insert a micro-USB data cable into the phone’s charger connector. Note To use these services, you must subscribe to a Nextel Wireless Web access plan. For more information on setting up your computer and your i776 phone for packet and circuit data calls, go to www.nextel.com.
For Model, choose Standard 19200 bps Modem, and click Next to continue. 5. From the Internet Connection screen, select Connect Using a Dial-up Modem and click Next. Important 5. Select the COM port you want your phone installed on, and click Next and then Finish to complete the installation. You may be prompted to select the modem you would like to use. Make sure you choose the Standard 19200 bps modem you created earlier. Creating a Dial-up Connection 6. Name the dial-up connection and click Next.
Connecting to the Internet or a Network for the First Time Before you use your phone to connect to the Internet or a network for the first time, you must disable LCP Extensions. 1. From Network Connections, select the dial-up connection you just created. 2. From the dial-up screen, click Properties. 3. From the Properties screen, click on the Networking tab, and click on Settings. 4. Remove the checkmark from Enable LCP Extensions, and click OK.
Section 4 Safety and Warranty Information
Section 4A Important Safety Information ⽧ General Precautions (page 190) ⽧ Maintaining Safe Use of and Access to Your Phone (page 191) ⽧ Using Your Phone With a Hearing Aid Device (page 193) ⽧ Caring for the Environment by Recycling (page 195) ⽧ Caring for the Battery (page 195) ⽧ Export Law Assurances (page 197) ⽧ Radio Frequency (RF) Energy (page 198) ⽧ Owner’s Record (page 200) ⽧ Patent and Trademark Information (page 201) ⽧ Software Copyright Notice (page 201) ⽧ Privacy and Data Se
Do Not Rely on Your Phone for Emergency Calls Mobile phones operate using radio signals, which cannot guarantee connection in all conditions. Therefore you should never rely solely upon any mobile phone for essential communication (e.g., medical emergencies). Emergency calls may not be possible on all cellular networks or when certain network services or mobile phone features are in use. Check with your local service provider for details.
Operational Precautions Note Always turn off the phone in healthcare facilities, and request permission before using the phone near medical equipment. To assure optimal radio product performance and to be sure that human exposure to RF does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions: Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone.
To avoid interfering with blasting operations, turn your phone off when in a blasting area or in other areas with signs indicating two-way radios should be turned off. Construction crews often use remote-control RF devices to set off explosives. Turn your phone off when you’re in any area that has a potentially explosive atmosphere. Although it’s rare, your phone and accessories could generate sparks. Sparks can cause an explosion or fire, resulting in bodily injury or even death.
out the phone with your hearing device is the best way to evaluate it for your personal needs. M-Ratings: Phones rated M3 or M4 meet FCC requirements for hearing aid compatibility and are likely to generate less interference to hearing devices than unrated phones. (M4 is the better/higher of the two ratings.) T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch”or “Telephone Switch”) than unrated phones.
Caring for the Battery Protecting Your Battery This symbol on a Motorola product means the product should not be disposed of with household waste. Disposal of your Mobile Device and Accessories Please do not dispose of mobile devices or electrical accessories (such as chargers, headsets, or batteries) with your household waste. These items should be disposed of in accordance with the national collection and recycling schemes operated by your local or regional authority.
䢇 䢇 It’s best to replace the battery when it no longer provides acceptable performance. It can be recharged hundreds of times before it needs replacing. Don’t store the battery in high temperature areas for long periods of time.
Your portable radio or its accessories may include detachable parts, which may present a choking hazard to small children. Keep your device and its accessories away from small children. Glass Parts Some parts of your phone may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your phone until the glass is replaced by a qualified service center.
Radio Frequency (RF) Energy Body-Worn Operation Your phone contains a transmitter and receiver. When it is ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits. To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the Motorola supplied or approved carrying case, holster or other body-worn accessory.
䢇 䢇 䢇 䢇 Institute of Electrical and Electronics Engineers (IEEE). C95. 1-2005 Edition.1 International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998. Ministry of Health (Canada). Safety Code 6. Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999. Australian Communications Authority Radio communications (Electromagnetic Radiation - Human Exposure) Standard 2003.
required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that is does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model.
Software Copyright Notice MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2008 Motorola, Inc. All rights reserved. The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media.
Privacy and Data Security Motorola understands that privacy and data security are important to everyone. Because some features of your phone may affect your privacy or data security, please follow these recommendations to enhance protection of your information: 䢇 Monitor access: Keep your phone with you and do not leave it where others may have unmonitored access. Lock your device’s keypad where this feature is available.
䢇 䢇 䢇 䢇 䢇 䢇 assistance or other special non-emergency wireless number.* * Wherever wireless phone service is available Section 4A. Important Safety Information Important Safety Information 䢇 receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.
Section 4B Manufacturer’s Warranty Motorola Limited Warranty for the United States and Canada What does this Warranty Cover? ⽧ Manufacturer’s Warranty (page 204) ⽧ Service and Repairs (page 209) Your phone has been designed to provide you with reliable, worry-free service. If for any reason you have a problem with your equipment, please refer to the manufacturer’s warranty in this section. For information regarding the terms and conditions of service for your phone, please visit www.nextel.
Products Covered Length of Coverage Products and Accessories as defined above, unless otherwise provided for below. One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below. Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap™ covers and cases. Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product. Monaural Headsets.
or (d) other acts which are not the fault of Motorola, are excluded from coverage. or use with the Products Accessories or Software is excluded from coverage. Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage. Software Unauthorized Service or Modification.
This warranty extends only to the first consumer purchaser, and is not transferable. How to Obtain Warranty Service or Other Information USA What Will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts.
What other limitations are there? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Warranty Service and Repairs If you have questions or need assistance, we’re here to help. Go to www.motorola.com/support, where you can select from a number of customer care options. You can also contact the Motorola Customer Support Center at 1-800-453-0920 (United States), 1-877-483-2840 (TTY/TDD United States for hearing impaired). Section 4B.
Index A Accessories 25 Charger 25 Li-Ion Battery 25 Activation 3 Answering Calls 29 Applications See Java Applications Attachments 131, 164 See also MMS Messages, Attachments Audio Files Inserting in Messages 161 See Voice Records B Backlight 60, 70 Battery 10–13 Capacity 10 Charging 12 210 Index Disposal 196 Installing 11 Baud rate 65 Bluetooth 138–148 Access Settings, Editing 146 Accessing 142 Bonds 143 Deleting Received Items 148 Device Details 145 Device Names, Editing 145 Devices, Deleting 146 Device
From MMS Messages 167 From Recent Calls 34, 38 Group Connect 62 International 179 Redialing 61 Remote Direct Connect Button 25 Talkgroup 62 Voice Name 35, 38 Camera 135–137 Clock 61 Clock Display 71 Contact Information Receiving 49, 94 Sending 47 Contacts 38, 98–105 Adding an Entry 98 Capacity 105 Creating 99 Creating MMS Messages 159 Deleting 103 Editing Entries 99, 101 Searching 102 Showing All Entries 102 Showing Only Direct Connect 102 Storing Fast 101 Storing From Memo 126 Storing From MMS Messages 16
Using Your Phone’s Datebook 106 DC/GC Options 62 See also Direct Connect Calls, Group Connect Calls, and Call Alerts Dialing Codes Non-Emergency Numbers 179 Telecommunications Relay Service 179 Digital Rights Management, see DRM Direct Connect One Touch, Setting 74 Direct Connect Number and Groups 41 Viewing 19 Direct Connect Numbers 37 Direct Send See Pictures, Sending Groups 50 212 Index Direct Talk 55 Code 56 Private Only 57 Receiving All Calls On Channel 58 Setting Up 56 Display Backlight 60 Display
Memory 115, 116, 117, 128 Resuming Applications 114 Running Applications 113 Suspending Applications 114 H Headset 75 Hearing Aid Compatibility 193 I Icons Contacts 99 Drafts 163 Groups 44 Inbox 166 Sent Items 163 Status Information 16 Inbox 154, 166 Icons 166 In-Call Options 32 International Numbers 179 J Java Applications Deleting 115 Downloading 115 Ending Applications 114 Games 185 Installing Applications 113 Index Best Results 122 Emergency Calls 120 Map Software 123 Privacy Options 88 Security 89 V
Renaming 132 Viewing 129 Memo Calling From 125 Creating 125 Editing 125 Storing to Contacts 126 Viewing 125 Memory Java Applications 115, 116, 117, 128 Media Center 133 MMS Messages 151, 172 Ring Tones 66 Voice Records 128 Menu ii Navigation 18 Selecting 18 Menu Style 70 Message Center 150 MMS Messages 154, 165 Text Messaging (SMS) 173 Voicemail 153 214 Index Messages Notifications 151 Notifications, Dismissing 152 Messaging Deleting Old Messages 72 Notification 72 Signature 72 MMS Messages Attachments 16
O One Touch Direct Connect 74 Owner’s Record 200 P Packet Data 185 Passwords 64 Pauses 33 Storing 101 Phone Active Line 61 Locking 64 Your Numbers 19 Phone (illus.
Saving a Number 96 Redialing 61 Resetting Your Phone 87 Ring Tones Deleting 67 Deleting From Messages 168 Downloading 66 Memory 66 Setting in Contacts 100 Vibrate 69 Viewing Assigned 66 Ringer Types 65 S Safety Radio Frequency 198 Safety Information 190–203 Safety Tips 191 Security 64, 84–86 216 Index Sent Items 154, 163 Icons 163 See also MMS Messages, Sent Items Settings 60 Resetting 64 Shortcuts Creating 80 Deleting 82 Editing 81 Using 81 Silence All 68 SIM Card Removing and Inserting 9 Security 84 SI
U Unlocking Your Phone 86 V Vibrate All 67 Voice Name 35, 38 Creating 101 Voice Records Creating 126 Deleting 127 Deleting From Messages 168 Inserting in Messages 161 Labelling 127 Locking 127 Memory 128 Playing 127, 132 Saving From Messages 168 Index Voicemail Playing Messages 153 Retrieving 152 Setting Up 3, 153 Volume, Setting 63 Turning Your Phone On and Off 15 W Waits Storing 101 Wallpaper 131 Warranty 204–209 Web 182–184 Bookmarks 183 Go to Web Sites 184 Launching 182 Reloading a Web Page 184 Rest
