i760 TELUS Handset User’s Guide
Contents Getting Started........................................... 1 Battery ............................................................. 3 Activating your Mike Account........................... 6 Powering On and Off ....................................... 6 Finding Your Phone Number and Private ID ... 7 Handset Basics ................................................ 7 Locating Your SIM Card ................................ 11 SIM Card Security.......................................... 11 Antenna .......
Creating Entries ............................................. 41 Storing Numbers Quickly ............................... 43 Editing Entries................................................ 43 Viewing Entries .............................................. 44 Deleting Entries ............................................. 46 Checking Capacity ......................................... 46 Creating Pauses and Waits ........................... 46 Advanced Calling Features..................... 48 Call Waiting.....
Customizing MMS.......................................... 75 Managing Memory ......................................... 77 SMS Messages......................................... 79 Receiving a Message .................................... 79 Reading From the Message Center............... 79 Calling and Storing Numbers ......................... 80 My Info ...................................................... 81 Viewing My Info ............................................. 81 Editing My Info .................
Datebook ................................................ 101 Viewing Datebook ........................................ 101 Creating Events ........................................... 102 Editing Events .............................................. 104 Deleting Events............................................ 104 Receiving Reminders................................... 105 Making Calls From Datebook and Datebook Reminders ................................................... 105 Customizing Datebook Setup ..
Customizing Your Handset................... 126 Setting the Volume ...................................... 126 Setting Your Handset to Vibrate .................. 126 Changing the Look of Your Handset............ 126 Airplane Mode—Temporarily Turning Off Calls ............................................................. 128 Using a Headset .......................................... 129 Using Settings.............................................. 129 Portable Radio Product Operation and EME Exposure.........
DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i760 Model Number: H65XAN6RR4AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules.
Getting Started earpiece retractable antenna internal display volume controls light sensor option keys Push-To-Talk (PTT) button power button audio jack space key speaker (in back) back key microphone accessory connector 1
Getting Started c Power button. Navigation key — press the arrows to scroll through menus and lists. 2 O OK Key — selects highlighted item; places and answers calls. m Menu Key — accesses context-sensitive menus. A Option Key — selects the option appearing above it on the display. s Send Key — places phone calls. e End Key — ends phone calls; returns to idle screen. t Speakerphone Key — acts like s when the flip is closed; turns speakerphone on; used with voice names and voice records. .
Battery Battery 3 Allow the battery door to pop, slide it forward and remove it from the back of the handset. Removing the Battery Door 1 Make sure the handset is powered off. See “Powering On and Off” on page 6. 2 Slide the release button back until it releases the battery door. Inserting the Battery 1 Remove the battery door. 2 Insert the top of the battery into the battery area. Press the bottom of the battery down to secure it.
Getting Started 3 Replace the battey door and press it gently until you hear a click. 3 Plug the other end of the charger into the accessory connector. Charging the Battery Your handset comes with a battery charger. 1 Plug the charger into an electrical outlet. 2 Open the connector cover. connector cover 4 Tip: To remove the charger from the accessory connector: Press the buttons on the sides of the plug. Pull the plug straight out.
Battery Charging Times Removing the Battery Check your battery and charger type against the grid to determine the appropriate charging times. 1 With the handset powered off, remove the battery door. 2 Remove the battery by pushing it toward the antenna and lifting it out. Battery Charger Rapid Mid-Rate High 2 hours Performance 3 hours Maximum Capacity 7.5 hours 3.5 hours For best results, charge the batteries within the temperature range of 10°C to 40°C (50°F to 104°F).
Getting Started • The battery capacity is degraded if the battery is stored for long periods while fully charged. If long term storage is required, store at half capacity. Activating your Mike Account Before you can begin using your i760 handset, you need to activate your Subscriber Identity Module (SIM) card on The Mike Network. Your SIM card holds the information required to enable your handset to connect to The Mike Network.
Finding Your Phone Number and Private ID As your handset connects to the network, you will see a welcome message and a connecting message. When the idle screen appears, the handset is ready to use. TELUS See “My Info” on page 81 for more information about this feature. Handset Basics Any time your handset is powered on, the display provides you with information and options. The external display shows a shortened version of the full-sized display. To see more information, open the flip.
Getting Started Text Area OK Key This area displays menus, messages, names, phone numbers, and other information. Pressing O: Display Options Two display options appear at the bottom of most screens. You select a display option by pressing the option key below it. Menus and Lists Your handset’s features are arranged in menus, submenus, and lists. To access the items in a menu or list, scroll using the navigation key at the top of your keypad. This key lets you scroll up, down, left, or right.
Handset Basics b Settings Customize your handset. See page 126. f Call Forward Set call forwarding options. See page 37. m Ring Tones Assign ring tones and turn ringer off. See page 98. o Datebook Schedule appointments. See page 101. c Media Center Access stored pictures and audio recordings. See page 86. g Memo Store a number to access later. See page 123. m Launch/Exit Mike’s Talk Around. Access Mike’s Talk Around Setup and Help. See page 24. h Call Timers Handset usage information.
Getting Started Status Icons Status icons appear at the top of the display. Some appear at all times. Others appear only when your handset is engaged in certain activities or when you have activated certain features. b b c d Battery Strength — More bars on the battery indicate a greater e f g d charge. G J H K I L Call Forward — Your handset is set to forward calls. See “Call Forwarding” on page 37. QRM Ringer Off — Your handset is set not to ring. See page 99.
Locating Your SIM Card Locating Your SIM Card SIM Card Security Your SIM (Subscriber Identity Module) card is a small piece of plastic located in the SIM card holder in the back of your handset, underneath the battery. Your SIM card stores all your Contacts information. Since this information is stored on your SIM card, not in your handset, you can remove the information by removing your SIM card. Note: Except for making emergency calls, your handset will not function without the SIM card.
Getting Started Important: If you enter your PIN incorrectly 5 times, your SIM card is blocked. To unblock your SIM card, you must contact TELUS Mobility Client Care. See “Unblocking the PIN”. 1 When the Enter SIM PIN Code screen appears, enter your SIM PIN. An asterisk appears for each character entered. 2 Press A under Ok. Changing the PIN 1 From the main menu, select Settings > Security > Change Passwords > SIM PIN. 2 At the Enter Old SIM PIN screen, enter the current SIM PIN. 3 Press A under Ok.
SIM Card Security Important: If you unsuccessfully enter the PUK code 10 times, your SIM card is permanently blocked and must be replaced. If this happens, all data is lost. You will get a message to contact TELUS Mobility Client Care. Except for making emergency calls, your handset will not function with a blocked SIM card. To unblock the PIN: 1 Press * # m 1. 2 At your TELUS Mobility representative’s request, provide the information needed to give you a PUK code. 3 Select Unblock PIN.
Getting Started Inserting Your SIM Card 3 Open the SIM card holder. 1 With your handset powered off, remove the back cover and battery. 2 Slide the latch towards the right to open the SIM card holder. latch 4 Carefully slide your SIM card into the SIM card holder.
SIM Card Security 5 Close the SIM card holder. 2 Slide the latch towards the right to open the SIM card holder. latch 6 Slide the latch towards the left to close the SIM card holder. Removing Your SIM Card 3 Open the SIM card holder. Important: To avoid loss or damage, do not remove your SIM card from your handset unless absolutely necessary. 1 With your handset powered off, remove the back cover and battery. See “Removing the Battery” on page 5.
Getting Started 4 Carefully slide your SIM card out of the SIM card holder. To extend the antenna, pull gently on the rounded tip until the antenna is fully extended and clicks into position. When finished with a call, retract the antenna by pushing gently on the rounded tip until the antenna clicks into place. To optimize your handset’s performance, extend the antenna when you make or receive a call, and avoid touching the antenna with any body part. 5 Close the SIM card holder.
Accessories Accessories Your handset comes with a battery and a charger. To order additional accessories, log on to our Web site at www.telusmobility.com or contact your Mike Dealer. For More Information If you have questions about your i760 handset, contact your Mike Dealer or TELUS Mobility Client Care.
Mike’s Direct Connect Service There are two ways of communicating over Mike’s Direct Connect service: • one-to-one using a private call • one-to-many in a group call Both of these methods are very similar to two-way radio, and at a fraction of the cost of traditional cellular. Mike’s Direct Connect also offers the Call Alert feature, which gives recipients a notice, similar to a ringer, that you would like to speak to them.
One-to-One Private Calls From the Recent Calls List The recent calls list stores the last 20 calls you made or received. With the Contacts type field highlighted, scroll left or right to display the Contacts type for the number you want to call. To select a Private ID from the recent calls list as the number you want to call: If you are making a Private call, your handset places the call to the Private ID stored in the Contacts entry, even if the Private ID icon is not displayed.
Mike’s Direct Connect Service 3 Release the PTT button to listen. One Touch PTT One Touch PTT sets your handset to call the most recent Private ID on the recent calls list, or to a Private ID you choose, every time you press the PTT button. See “Setting One Touch PTT” below. Enter the number using your keypad. -orPress A under Search. Select Contacts, Recent Calls, or Memo. Enter the number from Contacts, the recent calls list, or Memo, as you would when making a call.
Using the Call Alert Queue • Clear — dismiss and delete the call alert Viewing Date and Time Sending Call Alerts To view the date and time a call alert was received: 1 Enter the Private ID you want to send to, as you would when making a Private call. 2 Press A under Alert. Ready to Alert appears on the display. 3 Press the PTT button until Alert Successful appears on the display.
Mike’s Direct Connect Service Note: Answering a call alert from the recent call list does not remove it from the call alert queue. Deleting Call Alerts To delete a call alert from the queue: 1 From the call alert queue, scroll to the call alert you want to delete. 2 Press m. 3 Select Delete. 4 Press A under Yes to confirm. To delete all call alerts from the queue: 1 From the call alert queue, press m. 2 From the call alert menu, select Delete All. 3 Press A under Yes to confirm.
One-to-Many Group Calls Making Group Calls 1 Press #. Then enter the Talkgroup number using the keypad. -orChoose the Talkgroup name from Contacts or recent calls list. 2 Proceed as if making a Private call. Receiving Group Calls To answer a group call: Proceed as if answering a Private call. Only one person at a time may speak on a group call. Turning off Group Calls To control whether you hear group calls to your Talkgroup: 1 From the main menu, select Settings > 2-Way Radio > Tkgrp Silent.
Mike’s Talk AroundTM Note: Mike’s Talk Around is a subscription feature. See your Mike dealer for more information. Mike’s Talk Around allows direct two-way handset-to-handset communications between two or more handsets equipped for Mike’s Talk Around. You can make and receive Mike’s Talk Around calls even when network service is not available. You can talk to anyone on your code and channel within your range. Note: Range will vary based on terrain, man-made structures and atmospheric conditions.
Channels and Codes Exiting Mike’s Talk Around To set your handset to network mode when Mike’s Talk Around is active: 1 From the Talk Around idle screen, press m. 2 Scroll to TA Options and press O. 3 Select Exit Talk Around. Switching to Network Please Wait displays. After a few seconds, the network idle screen appears. To have a conversation, all parties must be on the same channel and code.
Mike’s Talk AroundTM Making and Receiving Code Calls in Mike’s Talk Around To make a code call in Mike’s Talk Around: 1 Press and hold the PTT button. Transmit appears on the first line of display. Begin speaking after your handset emits the Mike’s Talk Around tone. 2 Release the PTT button to listen. The tone emitted from your handset when using Mike’s Talk Around is 4 beeps and sounds different from the standard tone heard with on-network Private and group calls.
Private Mike’s Talk Around Calls Private Mike’s Talk Around Calls You can have a private conversation with another person using Mike’s Talk Around. When on a private Mike’s Talk Around call, no other parties can hear your conversation. In order to make a private Mike’s Talk Around Call, you must use the valid 10-digit Personal Telephone Number (PTN) of the person you are calling. Note: If the PTN is more than 10-digits, enter the last 10-digits of the PTN.
Mike’s Talk AroundTM 2 Press and hold the PTT button. Begin speaking after your handset emits the Mike’s Talk Around tone. 3 Release the PTT button to listen. The number or name of the person you are calling will appear in the first line of the display. Receiving a Private Mike’s Talk Around Call The number or name of the person who initiated the call will appear in the first line of the display. Note: You can reply within 6 seconds simply by pressing the PTT button.
Setup Options • Launch directly into Mike’s Talk Around when you select Talk Around from the main menu. • Notify you periodically with a tone that you are in Mike’s Talk Around. Using Direct Launch To set your handset to launch Mike’s Talk Around when you select Talk Around from the main menu: 1 From the Setup screen, scroll to Direct Launch and press O. 2 Select On. Note: If Direct Launch is set to On, you will not see TA Options when you select Talk Around from the main menu.
Making Phone Calls Making Phone Calls Receiving Phone Calls To make a phone call: When you receive a phone call, your handset rings, vibrates, or lights up its backlight. With the Flip Open 1 Enter the number you want to call. 2 To place the call: Press s. -orIf you entered the number from the idle screen, press O. 3 To end the call: Press e. -orClose the flip. To end a call by closing the flip, you must have the Flip to End feature turned on (see “Setting Flip Actions” on page 52.
Call Icons Press e. -orClose the flip. -or- Call Icons When you make a phone call, call icons appear in the text area of the handset’s display. X Placing a phone call. W Receiving a phone call. Y Phone call is active. Z Phone call is on hold. U Phone call ended. When you miss a call, this icon appears in the text area: V You missed a phone call.
Making Phone Calls 2 To view the rest of the recent calls list, press the volume keys on the side of your handset. 3 You can call the number displayed by pressing t on top of the handset. From Contacts If you have numbers stored in Contacts, you can use these numbers to make calls. For information on entering numbers into Contacts, see “Creating Entries” on page 41. 1 From the main menu, select Contacts. 2 Scroll to the name or number you want to call.
Missed Phone Calls Redialing the Last Number Using Speed Dial and Turbo Dial® Press and hold s to place a call to the last phone number you called. Each phone number stored in Contacts is assigned a Speed Dial number, which you can use to enter that number. Using a Voice Name If you have created a voice name in Contacts for the number you want to call, say the voice name into your handset to enter the number. See page 41 for information on voice names.
Making Phone Calls With the Flip Open Opening the flip turns speakerphone off. If you want to dismiss the missed call message, press A under Back. -or- Using Mute If you want to view the missed call on the recent calls list, press A under View. Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call. With the Flip Closed If you want to dismiss the missed call message, press .. To turn mute on: Press A under Mute.
Calls and Call Alerts Recent Calls The recent calls list stores information associated with calls you have made and received and call alerts you have received. It also stores My Info and contact information sent to you from other handsets. The recent calls list stores up to 20 items. Calls and Call Alerts The recent calls list stores the numbers of up to 20 of the most recent calls you have made and received.
Recent Calls If you receive My Info from the same handset more than once, only the most recently sent version appears in the recent calls list. Contact Information From Other Handsets When you select contact information to view its details, you see the name or Private ID or the person who sent the information and all the information in the item. If you receive contact information with the same name from the same handset more than once, only the most recently sent version appears in the recent calls list.
Storing Items to Contacts Choosing Picture View or List View You can set your handset to show the picture associated with each item as you view the recent calls list or show the list without pictures. 1 From the recent calls list, press m. 2 Select Recent Calls View. 3 Select List View to show the recent calls list without pictures. -orSelect Picture View to show the picture associated with each entry. Storing Items to Contacts 1 From the recent calls list, scroll to or select the item you want to store.
Recent Calls 3 Press O or press A under Yes to confirm. Making Calls From the Recent Calls List With the Flip Open 1 From the main menu, select Recent Calls. 2 Scroll to the item containing the number you want to call. • If you scroll to a call, you can make a call to the number that made the call. If the number is stored in Contacts, you can make a call to any of the numbers stored with it.
Making Calls From the Recent Calls List 3 To make a phone call, press t on the top of your handset. -orTo make a Private call, press the PTT button.
Contacts Contacts • A Contacts type — Each number or address stored must be assigned a Contacts type: Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses. A Mobile phone number Information stored in Contacts is saved on your SIM card. If you move your SIM card to another SIM-based handset, you can access information stored in Contacts from that handset.
Accessing Contacts Note: You can store numbers up to 64 digits long, but every 20 digits must be separated by a pause or wait. See “Creating Pauses and Waits” on page 46. • A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it. • A voice name — If you create a voice name for a number, you can then dial that number by saying the voice name into your handset.
Contacts Enter the number or address. For phone numbers, use the 10-digit format. For email addresses, see “Entering Text” on page 54. Tip: Press A under Browse to select a number or address from Contacts, the recent calls list, or Memo. When you are finished, press O. 6 If you want to change the default Speed Dial number or a create a voice name for the entry, select [Options]. See “Assigning a Speed Dial Number or Voice Name”.
Storing Numbers Quickly With the Speed # field highlighted, press O. Press A under Delete to delete the current Speed Dial number. Enter the new Speed Dial number using the keypad. When you are finished, press O. 3 If you want to create a voice name for a phone number, select Voice Name. As directed by the screen prompts, say and repeat the name you want to assign to the number. Speak clearly into the microphone. 4 To store the number as a new entry, select [New Contact].
Contacts Viewing Entries Selecting an Entry When you view Contacts entries, you can choose how much detail you want to see. In this view, each entry shows: Viewing the Contacts List In this view, each entry shows: • The name assigned to the entry • A small version of the picture assigned to the entry, if you have set Contacts to show pictures in the Contacts list. See “Choosing Picture View or List View” on page 45.
Viewing Entries If you select a phone number, you can view its Speed Dial number and see whether it has a voice name. To return to the entry, press A under Back or press O. Viewing a Large Picture To view a large version of the picture assigned to an entry: 1 Select the entry. 2 Select the first item shown on the entry screen. This item shows the name assigned to the entry or No Name. Note: You cannot make calls from this view. To return to the entry, press A under Back or press O.
Contacts Showing Only Private IDs and Talkgroups To set Contacts to show only entries that contain Private IDs and Talkgroup entries: 1 From the Contacts list, press m. 2 Select Filter. 3 Set this option to Show Prvt/Grp. To set Contacts to show all entries: 1 From the Contacts list, press m. 2 Select Filter. 3 Set this option to Show All. Deleting Entries Delete an Entry 1 From the Contacts list, scroll to the entry you want to delete. 2 Press m. 3 To delete the entire entry, select Delete Contact.
Creating Pauses and Waits If you store 17035551235P1234, when you select this number and make a call, your handset dials the first 11 digits, pauses for 3 seconds, then dials the last 4 digits. If you want a pause longer than 3 seconds, press and hold * more than once. Each P represents a 3-second pause. Note: The network translates the “+” into the appropriate international access code needed to place the call. 2 Enter the country code, city code or area code, and handset number.
Advanced Calling Features Call Waiting Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. If you are on a call and receive a second call, your handset emits a tone and displays a message saying you are receiving a second call. To accept the second call and put the active call on hold: Press A under Yes. To accept the second call and end the active call: 1 Press e. Your handset rings with the second call.
Putting a Call on Hold Putting a Call on Hold J Phone line 2 is active; calls to phone line 1 are 1 While on an active call, press m. 2 Select Hold. K Phone line 2 is active; calls to phone line 2 are If you want to make the call active again, press A under Resume. L Phone line 2 is active; calls to phone lines 1 Call Forwarding Call forwarding sends calls to the phone numbers you specify.
Advanced Calling Features Turning Off Call Forwarding If you do not want all your calls forwarded, turn the feature off: 1 From the main menu, select Call Forward > To. 2 Set this option to Off. All your calls are now sent to your handset. Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voice mail.
Calling 2 People Note: Your handset comes pre-programmed to detailed forward to Mike’s Voice Mail. If you change your detailed call forwarding, remember to reset the forwarding back to your access number or your phone number. Calling 2 People Putting a Call on Hold, Making a Second Call 1 2 3 4 Place or receive a phone call. While the call is active, press m. Select 2nd Call. This puts the call on hold. Enter the second phone number you want to call. Tip: For quick ways to enter the number, press m.
Advanced Calling Features Creating Pauses and Waits While Dialing You can enter a pause or wait while dialing a number. For more information on pauses and waits, see “Creating Pauses and Waits” on page 46. To create a pause while dialing a phone number: 1 From the keypad, enter the digits you want to occur before the pause. 2 Press m. 3 Select Insert Pause. 4 Enter the digits you want to occur after the pause.
Call Timers To set your handset not to answer calls when you open the flip: Set Flip to End to Off in step 2. Note: If you are using your handset with a headset, and you have the Flip to End option set to On, closing your flip sends incoming sound to the headset and does not end the call.
Entering Text Using Word Mode You can enter text, numbers, and symbols into your handset using Alpha, Word, Numeric, or Symbol text input modes. In Word mode, T9 Text Input analyzes the letters on the keypad button you press and arranges them to create words. As you type, T9 Text Input matches your keystrokes to words in its database and displays the most commonly used matching word. You can add your own words to this database. l Alpha — Press a key several times for each character.
Special Function Keys 3 Select Word as your text input mode. 4 Press #. The word you typed in Alpha text entry mode is now in the database. Note: You cannot store alphanumeric combinations, such as Y2K. Choosing a Language To change the language of the database: 1 At a screen that requires you to enter text, press m. 2 Select Languages. 3 Select the language you want for your database. Special Function Keys Some of the handset’s keys assume different functions while in Alpha or Word mode.
Message Center 3 Press O or press A under the display option on the left. The message center manages your messages. The message center shows how many messages you have of each type. You can listen to, read, or delete these messages. When you receive the following types of messages, you can access them through the message center: • Voice mail messages • Multimedia Messaging Service (MMS) messages. See page 59.
Message Notifications • Dismiss the message notification and access the message later through the message center. Message Notifications When you receive a message, your handset notifies you with text on the display and a notification tone or vibration. You can access the message or dismiss the notification. If you dismiss the notification, the message is not deleted. It can be accessed through the message center.
Message Center If the flip is closed, press .. -orIf the flip is open, press O or press A under Back. This icony appears on the display, reminding you that you have a new message. Sending Unanswered Calls to Voice Mail To send a phone call to voice mail instead of answering it: Press e. -orPress A under No. If the caller leaves a message, this icon y appears on the display, reminding you that you have a new message.
Multimedia Messages Multimedia Messaging Service (MMS) lets you send and receive messages that may include text, pictures, and audio recordings.
Multimedia Messages • Valid Until — sets a date after which no more attempts are made to deliver the message. To send a message, you must address it to at least one recipient. All other message fields are optional. You can fill in the message fields in any order. Entering Text In message fields that require you to enter text, you can begin entering the text from the keypad when the field is highlighted. While entering text, you can always choose a text input mode from the context-sensitive menu.
Creating and Sending Messages Select To. Enter the phone number or email address from the keypad and press O. Repeat this action to enter more phone numbers or email addresses. -orSelect recipients from Contacts or the recent calls list. See “More Ways to Address a Message” on page 64. Tip: To remove a phone number or email address from the list of message recipients, scroll to the phone number or email address and press A under Remove. When you are finished addressing the message, press A under Back.
Multimedia Messages 3 If you want to attach a picture or audio recordings, see “Attaching Pictures and Audio Recordings From the Media Center” on page 66 or “Attaching New Voice Records” on page 67. 4 If you want to add more recipients in addition to those in the To field: Select Cc. Enter the phone number or email address from the keypad and press O. Repeat this action to enter more phone numbers or email addresses. -orSelect recipients from Contacts or the recent calls list.
Creating and Sending Messages • Message — the first 40 characters of the message you are replying to. Text you add to the body of your message appears above this. • Subject — “Re:” followed by the subject line of the message you are replying to, if any. • Cc — If you are sending a reply to all, some recipients may be in this field. To reply to a message: 1 View the message you want to reply to. -orIf you have already viewed the message, scroll to it. 2 To reply to the sender only, press A under Reply.
Multimedia Messages 3 Press A under Create. -orIf Create is not one of your options: Press m. Select Create. 4 Create and send the message. The message is automatically addressed to the phone number you chose. From the Idle Screen 1 Using the keypad, enter the number you want to send a message to. 2 Press m. 3 Select Create. The message is automatically addressed to the phone number you chose. From the Media Center You can send pictures and audio recordings in MMS messages.
Creating and Sending Messages 4 If the entry contains more than one phone number or email address, select the ones you want to send the message to. When you are finished selecting items within the entry, press A under Done. 5 When you are finished selecting entries, press A under Done. From the Recent Calls List When you select recipients from the recent calls list, phone calls are displayed.
Multimedia Messages Inserting Pictures and Audio Recordings From the Media Center When you are filling in the Message field, you can insert pictures and audio recordings from the media center into the body of the message. Removing an Inserted Item To remove an item inserted into the body of the message you are creating: 1 Highlight the item you want to remove. 2 Press A under Delete. You can insert more than one of these items into a message.
Drafts 4 If you want to attach more items, select [New Attachment]. 5 When you are finished, press A under Done. Removing an Attachment Attaching New Voice Records 1 2 3 4 While you are creating a message, you can create voice records and attach them to the message. Creating a New Voice Record 1 While you are creating a message, scroll to any message field and press m. -orSelect Attach > [New Attachment]. 2 Select Record Voice. 3 Say the message you want to record into the microphone.
Multimedia Messages Editing a Draft Sent Items 1 From the main menu, select Messages > Drafts. 2 Select the draft you want to edit. 3 Continue as you would when creating a message. Messages you have sent or tried to send are stored in Sent Items. Deleting a Draft When you send a draft, it is deleted from Drafts. To delete a message in Drafts without sending it: 1 2 3 4 Scroll to the message you want to delete. Press m. Select Delete Message. Press O or press A under Yes to confirm.
Receiving a Message Checking Delivery Status If a message was successfully sent and you set the message to give a report confirming delivery, you can check the delivery status: 1 From the main menu, select Messages > Sent Items. 2 Scroll to the message you want to view. 3 Press m. 4 Select Delivery Status. Sent Items Icons t Successfully sent. v Unsuccessfully sent. w High priority. L Attachment. z High priority and locked. y High priority with an attachment.
Multimedia Messages To dismiss the message notification: If the flip is closed, press .. -orIf the flip is open, press A under the display option on the right or close the flip. This icon w appears on the display, reminding you that you have a new message. Navigating a Message As you scroll through a message, numbers, email addresses, and website URLs are highlighted. Pictures and audio recordings are also highlighted. Opening Attachments To open an attachment. 1 View the message.
Viewing Received Messages From the Message Center To repeat the part of the slide show you have just viewed, scroll left or scroll up. To view the slide show again, press A under Restart. Note: You can create and send MMS messages containing slide shows on www.telusmobility.com. Inbox Icons u Unread message. T Read message. r Reply sent. N Forwarded. Viewing Received Messages From the Message Center O Locked. w High priority. 1 From the main menu, select Messages > Inbox.
Multimedia Messages Actions for Received Messages 4 Create and send your message. Deleting Embedded objects and attachments are included when you forward a message. Unread Messages Locking and Unlocking 1 Scroll to the message you want to delete. 2 Press A under Delete. 3 Press O or press A under Yes to confirm. When you lock a message, it cannot be deleted until you unlock it. Read Messages 1 Scroll to the message you want to delete. -orView the message you want to delete. 2 Press m.
Actions for Received Messages Making a Private Call 1 View the message. 2 Highlight the Private ID you want to call. 3 Press the PTT button. Sending a Call Alert 1 View the message. 2 Highlight the Private ID or Talkgroup ID you want to alert. 3 Press m. 4 Select Alert. 5 Press the PTT button. Making a Group Call 1 2 3 4 5 View the message. Press m. Highlight the Talkgroup ID you want to call. Select Talkgroup. Press the PTT button.
Multimedia Messages 4 Select Go To Website. Note: The entire URL must appear in the message. Otherwise, you cannot go to the website. 2 Highlight the picture or audio recording you want to delete. 3 Press m. 4 Select Delete Picture or Delete Audio. Saving an Embedded Picture or Audio Recording Saving Attachments To save a picture or audio recording that is part of the body of a message you receive: 1 View the message. 2 Highlight the picture or audio recording you want to save. 3 Press m.
Customizing MMS If the slide show contains pictures, you can save each picture as it appears. If the slide show contains audio recordings, you can save each audio recording at any time during the slide show. Customizing MMS Saving Pictures • Friendly Name — Enter text here to create a friendly name. Your friendly name is the name displayed in the From field on other iDEN handsets when they receive messages from you. • Signature — Enter text here to create a signature.
Multimedia Messages New Quick Notes and Reply Phrases Creating 1 From the Setup menu, select Quick Notes or Replies. 2 Select [New Quicknote] or [New Reply]. -orPress A under New. 3 Enter text from the keypad. 4 When you are finished, press O. Editing You can edit only Quick Notes and reply phrases you have created. 1 From the Setup menu, select Quick Notes or Replies. 2 Select the Quick Note or reply phrase you want to edit. 3 Edit the text. 4 When you are finished, press O.
Managing Memory • 10 Messages — If you have more than 10 messages, messages are deleted in the order they were received, starting with the oldest, until 10 are left. • 1 Day — Messages are deleted if they are older than 1 day. • 3 Days — Messages are deleted if they are older than 3 days. • Custom — Lets you create a clean-up option of up to 99 messages or 99 days. For the Inbox 1 From the Setup menu, select Cleanup > Inbox. 2 Choose a clean-up option.
Multimedia Messages Tip: This option is available from many context-sensitive menus when you are using MMS. To free memory, delete messages. To delete many messages at once, see “Deleting All Messages” on page 78. To set messages to be deleted automatically, see “Setting the Clean-up Option” on page 76.
SMS Messages Short Message Service (SMS) messages are short text messages, also called text and numeric messages. Your handset receives SMS messages sent to its SMS address, but does not send SMS messages. Messages are sent through MMS. If your handset is powered off when you receive a message, your handset notifies you the next time you power it on. If you are out of your coverage area, your handset alerts you when you return to your coverage area.
SMS Messages Calling and Storing Numbers If an SMS message you receive contains a phone number, you can call that number by pressing s while viewing the message. If an SMS message you receive contains a phone number, Private ID, or Talkgroup ID, you can call or send a call alert to that number, or store that number to Contacts. Press m while viewing the message to access these options. To call the number, select Call Back. To send a call alert, select Alert, then press the PTT button.
My Info My Info lets you view information about your handset and send this information to other handsets. Viewing My Info 1 From the main menu, select My Info. 2 Scroll to see the entire screen. The My Info screen contains: • My Name — You can enter your name here. • Line 1 and Line 2 — your phone numbers for phone lines 1 and 2. Each number appears when you receive your first call on that line. • Private — Your Private ID is the number that others use to contact you using Private calls.
My Info You can also edit the information in Line 1, Line 2, and Circuit Data, but your changes are only temporary. The next time your handset registers on the network, your actual phone numbers and circuit data number appear again in My Info. 5 When you are finished, press A under Done. Setting Sending Options 1 2 3 4 Your handset can send information in My Info to other handsets that have this capability.
Mike’s Wireless Web Services Your i760 handset is equipped with a microbrowser that can be used to access Mike's Wireless Web Services and other up-to-the-minute information. You can view specially designed text versions of popular Internet sites that provide news, sports, weather, entertainment, stock quote sites and other useful information. To access the microbrowser: From the idle screen, press m to access the main menu. Scroll to Browser. Press A under Browse to access the microbrowser.
Mike’s Wireless Web Services Below is the list of available options: • Exit Browser — closes the browser and returns you to the idle screen. Use this option when you want to return to the page currently viewed at a later time, without navigating through the entire menu structure again. • Reload — reloads the current Wireless Web page viewed, refreshing the information with the most current from the information provider.
Using Your Handset as a Modem 2 With the handset’s display facing up, insert a data cable’s connector into the accessory connector, until you hear a click. 4 Press A under Change 5 Scroll to the baud rate for your location. Press A under Select. 3 Insert the data plug into the COM port of the other device.
Media Center Media Center Viewing the Media Center The media center lets you access pictures and audio recordings. To access the media center: All pictures saved in your handset can be accessed through the media center. Scroll to view the items in the media center.
Forward Locked Items Tip: You can also press * or # to scroll through these options while viewing the list of items. Keeping the Last Filter Setting You can set the media center to show all items every time you access it or to keep the filtering setting you had when you last viewed it. 1 2 3 4 Access the media center. Press m. Select Setup. Select Remember Filter to keep the filtering setting you had when you last viewed the media center.
When you view items in the media center, one of these icons appears next to each forward locked item: f Forward locked. c Forward lock and locked. When an item is locked, it cannot be deleted from the media center. See “Locking Items” on page 90. Locking an item has no effect on its forward locking. Pictures The media center lets you view pictures, assign them to Contacts entries, or set them as your handset’s wallpaper. Viewing To view a picture, select it from the list of items in the media center.
Audio Recordings Setting as Wallpaper To restart the audio recording, scroll right. 1 Scroll to or select the picture you want to set as wallpaper. 2 Press m. 3 Select Set As Wallpaper. Note: If you later set your wallpaper to change automatically, the picture is included. See “Wallpaper” on page 127. When you play an audio recording, an animated image appears on the display.
Locking Items 4 Press O or A under Yes to confirm. When you lock an item in the media center, it cannot be deleted until you unlock it. Deleting All Items 1 Access the media center. 2 Scroll to or select the item you want to lock or unlock. 3 Press m. 4 Select Lock to lock the item. -orSelect Unlock to unlock the item. When you view items in the media center, one of these icons appears next to each locked item: R Forward locked.
Managing Memory Note: Items in the media center are stored in your handset using the same memory space used to store messages, Java applications data, and voice records created when your handset is in a call. Deleting some of these other items frees memory for messages.
Digital Rights Management Digital Rights Management When you download multimedia content available online, such as audio, images, or Java applications, these items may be subject to DRM restrictions. DRM, or digital rights management, is a system that defines how copyrighted multimedia content can be distributed and used. DRM sets items to time-based or count-based usage settings. Time-based settings let you use the given item for a specified interval.
Managing DRM Items You can gift a DRM item to a friend’s handset. Gifting is when you purchase a copy of a DRM item and send it to someone. If you do not want to gift an item, you can send a message to a friend’s handset that contains the link for purchasing the item. The friend can then purchase the item quickly and easily. Sending this type of message is called Tell-A-Friend. Gifting To check if a DRM item is giftable: 1 Go to the location on your handset that contains the item you want.
Digital Rights Management • For count-based items, the number of credits (uses) left or an unlimited use notice • The name of the item’s vendor Deleting Items To view the license of a DRM item: If you delete a DRM item that you purchased from TELUS Mobility from your handset, you will have to purchase it again to download it. 1 Go to the location on your handset that contains the item you want. 2 Highlight the DRM item you want to view license information for. 3 Press m. 4 Select License Info.
Managing DRM Items When ring tones and wallpapers expire, they are automatically removed from their respective lists. For expired items that continue to display in their respective lists, you can either choose to renew the license for the item or else manually delete the item. Note: You cannot delete locked items.
Using Direct Send Using Direct Send Direct Send lets you exchange My Info and contact information with other handsets that have this capability. You do this through Private calls. Direct Send cannot be used during group calls. Sending My Info and Contact Information When you send My Info or contact information using Direct Send, the information you sent appears on the display of the handset you are engaged in the Private call with.
Sending My Info and Contact Information 2 Select Contacts or Recent Calls. 3 Scroll to the Contacts entry or item in the recent calls list you want to send. 4 When Ready to Send appears on the display, press the PTT button to send the information. Receiving My Info or Contact Information Starting a Call by Sending Information j My Info. 1 From the Contacts list, scroll to or select the entry you want to send. -or- d Contact information.
Ring Tones To set the ring tone your handset makes when you receive phone calls, call alerts, message notifications, or Datebook reminders: 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Scroll through the list of ring tones and select the one you want to assign. Vibrate sets your handset to vibrate instead of making a sound; Silent sets your handset to neither vibrate nor make a sound. Tip: Highlight a ring tone to hear it.
Assigning Ring Tones to Contacts 7 When you are finished, press A under Done. Assigning Ring Tones to Contacts This icon S appears on the display. You can set the ring tone your handset makes when you receive phone calls or call alerts from someone you have stored in Contacts. Viewing Ring Tone Assignments 1 From the main menu, select Ring Tones. 2 Make sure VibeAll is set to Off. 3 Scroll through the list of ring tones and select the one you want to assign. 4 Select Contact.
Ring Tones Note: Ring tones are stored in your handset using the same memory space used to store messages, Java application data, items accessible through the media center, and voice records created when your handset is in a call. Deleting some of these other items frees memory for ring tones. Deleting Custom Ring Tones Deleting a ring tone from the list of ring tones deletes it from your handset completely, including the media center and Contacts.
Datebook Datebook stores up to 250 events. You can store events over a 13 month period — 12 months after and 1 month before the current date. A Datebook event contains: • A subject — A name you assign to the event. You can also enter a phone number, Private ID, or Talkgroup number here. After the event is stored, you can call this number from Datebook or when you get a reminder of this event. • A location — The location of the event. You can also enter a phone number, Private ID, or Talkgroup number here.
Datebook 2 Select the event. To change the current view: 1 While viewing Datebook, press m. 2 Select the view you want. Navigating Datebook To scroll through Datebook: Scroll left and right using the navigation key. -orIn week view and month view, press * or #. To see more in day view: Scroll up and down using the navigation key. To highlight a day in month view: Enter the date using the keypad. To go to today’s date: 1 While viewing Datebook, press m. 2 Select Go To Today.
Creating Events 3 If you want to assign a location to the event: Select Location. Enter the date you want. 7 If you want to make the event a recurring event: Enter the location. See “Entering Text” on page 54. -or- Select Repeat. Enter a phone number, Private ID, or Talkgroup number. After the event is stored, you can call this number. If the event occurs more than once a week: Select Multiple Day. Select the days you want. When you are finished, press O.
Datebook Assigning More Options Editing Events To assign more options before storing an event: To change the details of an event: 1 If you have created a reminder for the event and want to set the ring tone for that reminder: 1 Select the day the event occurs. 2 Select the event. 3 Press A under Edit. Tip: To copy an event to another date: Press m. Select Copy. Select Ring Tone. Select the ring tone you want from the ring tones stored in your handset.
Receiving Reminders Receiving Reminders For Events with Numbers to Call If you created a reminder for a Datebook event, when the reminder time occurs, your handset notifies you with text on the display and a reminder tone. If you stored a phone number, Private ID, or Talkgroup number in the Subject or Location field of a Datebook event, you can call or send a call alert to that number from the reminder for that event. See “Making Calls from Datebook Reminders” on page 106.
Datebook Making Calls from Datebook To make a Private call or Talkgroup call: To make a phone call: Press the PTT button. -or- 1 Highlight or select the event containing the number you want to call. 2 Press s. -or- If you did not include a # before the Talkgroup you want to call: Press m. Select Talkgroup. Press the PTT button. Press m. Select Call # in Event. To make a Private call or Talkgroup call: 1 Highlight or select the event containing the number you want to call.
Customizing Datebook Setup • Reminders — If this option is set to Only When On, your handset to remind you of events only when it is on. If this option is set to Always, your handset powers itself on when you receive reminders. To avoid draining the battery, your handset then powers itself off after a short time. • Delete After — sets the amount of time Datebook waits to delete an event after is occurs. • Time Shift — lets you shift the times of all Datebook events.
Java Applications To run an application that does not have a shortcut on the main menu: Your handset arrives with Java applications preloaded. These preloaded applications autoinstall the first time you open them. 1 From the main menu, select Java Apps. 2 Select the application or suite of applications you want to run. 3 If you have selected a suite of applications, select the application you want to run. You can download and install more Java applications.
Ending Applications Ending Applications 5 Press O or press A under Yes to confirm. 6 When your handset has finished deleting the application, press A under Done. To end an application: To delete all Java applications: 1 From the main menu, select Java Apps. 2 Scroll to the application you want to end. 3 Press A under End. Tip: You can also end applications from the Suspended Apps screen. 1 2 3 4 5 To end all applications: Managing Memory 2 Select the application you want to resume.
Java Applications Shortcuts on the Main Menu When you install an application, you can create a shortcut to the application on the main menu. To create a shortcut to an application that is already installed: 1 From the main menu, select Settings > Personalize > Menu Options > Add/Remove Apps. -orFrom the main menu: Press m. Select Main Setup > Add/Remove Apps. 2 Scroll to view the list of Java applications. Any application that has a shortcut on the main menu has a checkmark next to it.
Java Applications and GPS Enabled • Restricted — No Java or similar software applications may access the location of your handset. However, location information may still be available to the handset’s owner, fleet manager, or account administrator. • Unrestricted — All Java applications may access the location of your handset, without notifying you. • By Permission — When a Java application attempts to access the location of your handset, you are prompted to give permission.
Java Applications • For this session — If the application requests access to the location of your handset again before you power off your handset, the request is granted without notifying you. • Only Once — If the application requests access to the location of your handset again, you are prompted to grant or deny permission.
GPS Enabled Your handset’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your handset, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.
GPS Enabled Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate. Even where adequate signals from multiple satellites are available, your GPS feature will only provide an approximate location, often within 45 meters (150 feet) but sometimes much further from your actual location.
Enhancing GPS Performance To calculate your location again: Press A under Rfrsh. It may take your handset several minutes to complete the process of determining your location. During this time, a message usually appears on your handset’s display saying your handset is scanning for satellites. For tips on getting the best location calculation, see “Enhancing GPS Performance”. The Position screen displays the updated information.
GPS Enabled • Hold your handset to enhance reception. Signals from GPS satellites are transmitted to your GPS antenna, which is in your handset antenna. Hold your handset away from your body, giving the antenna clear access to satellite signals. Do not cover the antenna area with your fingers or anything else. GPS antenna • In a car. When using the GPS Enabled feature in a car, position your handset so that the GPS antenna has good access to GPS signals through the car’s windows.
Setting Privacy Options The almanac contains information about the location of satellites, their operational status, and other satellite information. Keeping this information updated enhances the performance of your GPS feature. In most cases, your handset will be able to get a fix in strong satellite signal conditions with outdated almanac data, but it may take longer. If your satellite almanac data is out of date, your handset may prompt you to update it.
GPS Enabled 2 Select On or Off. 3 Enter the current GPS PIN. Note: When you receive your handset, your GPS PIN is 0000. 4 Press A under Ok. To change your GPS PIN: 1 From the main menu, select Settings > Security > Change Passwords > GPS PIN. 2 Enter the current GPS PIN. Note: When you receive your handset, your GPS PIN is 0000. 3 4 5 6 7 Press A under Ok. Enter the new 4- to 8-digit GPS PIN. Press A under Ok. Enter the new 4- to 8-digit GPS PIN to confirm. Press A under Ok.
Using GPS with Map Software Getting Started To connect your handset to your laptop or other device: 1 Open the flap covering the handset’s accessory connector. 3 Insert the data plug into the COM port of your laptop or other device. Make sure no other application is using the COM port selected.
Voice Records Playing Voice Records A voice record is a recording you make with your handset and can play back. You can record notes to yourself when your handset is not in a call or record phone calls when your handset is in a call. 1 From the main menu, select VoiceRecord. 2 Select the voice record you want to play. 3 To stop the voice record while it is playing, press O. Tip: To pause or resume, press any key.
Locking Voice Records Voice Records Icons Locking Voice Records One of these icons appears next to each voice record: When you lock a voice record, it cannot be deleted until you unlock it. c A voice record made while your handset was 1 From the main menu, select VoiceRecord. 2 Select the voice record you want to lock or unlock. 3 Select Lock to lock the message. -or- not in a call. v A voice record made while your handset was in a call.
Voice Records 2 3 4 5 Scroll to any voice record. Press m. Select Delete All. Press O or A under Yes to confirm. Managing Memory To view the amount of memory available for voice records: 1 From the main menu, select VoiceRecord. 2 Press m. 3 Select Memory. To free more memory by deleting all unlocked voice records: 1 2 3 4 5 From the main menu, select VoiceRecord. Press m. Select Memory. Select Delete. Press O or A under Yes to confirm.
Memo Memo lets you store a number, make a call to that number, and save it to Contacts. To create a memo: 1 From the main menu, select Memo. 2 Enter the number using your keypad. 3 Press O. To view the memo later: From the main menu, select Memo. To delete the memo: 1 From the main menu, select Memo. 2 Press and hold A under Delete. To edit the memo: To store the memo number to Contacts: 1 2 3 4 From the main menu, select Memo. Press m. Select Store to Cntcs.
Shortcuts Using a Shortcut Shortcuts lets you access most menu options by pressing a number on your keypad or saying the voice name of the shortcut. You create the shortcut and then use it to take you to that screen any time. If you know the shortcut number: Creating a Shortcut If you do not know the shortcut number: 1 Go to the menu item you want to create a shortcut for. 1 From the main menu, select Shortcuts. 2 Select the shortcut you want to use.
Deleting Shortcuts 8 Repeat step 4 through step 7 for all the items you want to move. 9 Press A under Done. To change the name or number assigned to a shortcut: 1 From the main menu, select Shortcuts. 2 Highlight any shortcut. 3 Press A under Edit. Deleting Shortcuts To delete a shortcut: 1 2 3 4 5 From the main menu, select Shortcuts. Scroll to the shortcut you want to delete. Press m. Select Delete. Press O or press A under Yes to confirm.
Customizing Your Handset Setting the Volume To set the volume of the sound coming from the handset’s earpiece or speaker: 1 From the main menu, select Settings > Volume. 2 Select Earpiece to set the earpiece volume. -orSelect Speaker to set the speaker volume. 3 To set the volume: Scroll left or right. -orPress the volume keys on the side of your handset. 4 Press O. To set the volume of the handset’s ring: Press the volume controls.
Changing the Look of Your Handset To change the theme of your handset: Including Pictures From the Media Center 1 From the main menu, select Settings > Display/Info > Theme. 2 Select the theme you want. If you have set wallpapers to change automatically, you can include pictures stored in the media center as images that may appear on the idle screen. Wallpaper 1 From the main menu, select Settings > Display/Info > Wallpaper > Select Pictures. 2 Select the pictures you want.
Customizing Your Handset If you do not do any of these things for 10 seconds, the backlight dims. If you do not do any of these things for 30 seconds or more, the backlight turns off. Airplane Mode—Temporarily Turning Off Calls When the backlight is off, pressing a key on the keypad turns the backlight on but does not perform the action associated with the key. Sometimes you may want to have your handset on, but turn off its ability to make and receive calls, such as when you are on an airplane.
Using a Headset Using a Headset If you use a headset or similar device with your handset, you can set your handset to send incoming sound to the headset only, or to the headset and the speaker at the same time: 1 From the main menu, select Settings > Advanced > Headset/Spkr. 2 Select HdsetOnly to send incoming sound to the headset only. -or- For phone calls, use the remote PTT button to answer calls, switch between calls, and end calls.
Customizing Your Handset • Clock — controls whether the time and date appear on the idle screen; sets time and date format; sets year. • Menu View — controls whether the items on your main menu and Java applications menu appear as large icons or a list. • Large Dialing — sets large digits to appear on the idle screen when you enter a number. • Contrast — sets the contrast of the display. • Language — sets the language that your handset displays.
Using Settings Personalize Features • Left Sftkey — sets the main menu item you access when you press the left option key from the idle screen. • Right Sftkey — sets the main menu item you access when you press the right option key from the idle screen. • Power Up — sets the main menu item you see when you power on your handset. The Personalize menu makes main menu items easier to access. Volume Features • One Touch PTT — control the action of the PTT button from the idle screen.
Customizing Your Handset • Change Passwords — changes your handset unlock code, security code, SIM PIN, and GPS PIN. • Java Speaker —sets the volume of sound associated with Java applications coming out of the speakers. • Data — sets the volume of sounds that notify you that you are receiving a circuit data call. Advanced Features Security Features The Advanced menu contains advanced and infrequently used Settings features.
Using Settings • Return to Home — After Handset controls how long the recent calls list displays after handset calls; After Prvt controls how long the recent calls list displays after Private calls. • Airplane Mode — prevents your handset from making or receiving phone calls, Private calls, or group calls, or transferring data. • Phone Only — allows you to conserve battery life by turning off dispatch and data modes.
Profiles Viewing Profiles A profile is a group of settings saved together so that you can apply them to your handset easily. To view the profiles stored in your handset: A profile contains these settings: • Ring Tones — sets all options described in “Ring Tones” on page 98, except assigning ring tones to Contacts. • Display/Info — sets Wallpaper, Color Palette, Text Size, and Backlight options. See “Display/Info Features” on page 129. • Phone Calls — sets Set Line and Auto Answer options.
Temporary Profiles When you do this, your handset either: • Updates the profile in effect to reflect these changes, without notifying you -or- A temporary profile stays in effect until you switch profiles, power off your handset, or delete it (or the profile it is based on) from the list of profiles.
Profiles To overwrite the profile that temporary profile is based on: 1 2 3 4 From the main menu, select Profiles. Scroll to the temporary profile. Press m. Select Store Changes. The temporary profile is stored with the name of the profile it is based on. The profile it is based on, as it existed before you made changes to settings, is gone. Creating Profiles 1 From the main menu, select Profiles. 2 Select New Profile. -orScroll to any profile. Press m. Select New.
Setting Call Filtering Setting Call Filtering The call filtering setting in each profile lets you control which calls, call alerts, and message notifications your handset notifies you of, and which it ignores. To set call filtering: 1 While setting options for a profile, select Call Filter. 2 To set filtering options for phone calls, select Phone. • Off sets your handset to notify you of all phone calls. • All sets your handset to ignore all phone calls.
Understanding Status Messages Status Messages Message Description You may receive status messages under certain conditions. Before contacting TELUS Mobility Client Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes the status messages. Service Not Available You are either out of coverage or having problems with provisioning. System Busy The system is experiencing heavy traffic. Please try again later.
Status Messages Message Description PIN Blocked Call Your Provider The incorrect PIN was entered 3 consecutive times. You will be unable to place or receive calls on your handset. Contact TELUS Mobility Client Care to have them obtain the PIN Unblock Key (PUK) code. Insert SIM Your SIM card is not being detected. Please check to ensure that you have inserted the SIM card correctly into your handset. Enter SIM PIN Please enter your 4- to 8- digit SIM PIN code.
Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR INTEGRATED MULTI-SERVICE PORTABLE RADIO. RF Operational Characteristics Your radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network.
Portable Radio Product Operation and EME Exposure To assure optimal radio product performance and make sure human exposure to radio frequency electromagnetic energy is within the guidelines set forth in the above standards, always adhere to the following procedures: Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone.
Safety and General Information ALL MODELS WITH FCC ID AZ489FT5844 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Electro Magnetic Interference/Compatibility Electro Magnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Medical Devices Pacemakers The Advanced Medical Technology Association (AdvaMed) recommends that a minimum separation of 6 inches (15 cm) be maintained between a handheld wireless radio product and a pacemaker.
Safety and General Information Other Medical Devices Operational Warnings If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. For Vehicles with an Air Bag Use While Driving Check the laws and regulations on the use of radio products in the area where you drive. Always obey them.
Operational Cautions other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.
Safety and General Information Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product. Accessory Safety Information Important: Save these accessory safety instructions.
Accessory Safety Information • • • • • • • The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet. Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician. Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
Hearing Aid Compatibility Hearing Aid Compatibility When some mobile handsets are used with certain hearing devices (including hearing aids andcochlear implants), users may detect a noise which can interfere with the effectiveness of the hearing device. Some hearing devices are more “immune” than others to this interference noise, and mobile handsets can also vary in the amount of interference noise they may generate at any given time. ANSI standard C63.
available. Be sure to evaluate your personal needs by trying out this mobile handset with your specific hearing device, using both antenna positions if equipped with a retractable antenna. More information about hearing aid compatibility may be found at: http://commerce.motorola.com/consumer/QWhtml/ accessibility/default.html, www.fcc.gov, www.fda.gov, and www.accesswireless.org.
MOTOROLA LIMITED WARRANTY Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES AND SOFTWARE PURCHASED IN THE UNITED STATES OR CANADA PRODUCTS COVERED LENGTH OF COVERAGE Products as defined above. One (1) year from the date of purchase by the first consumer purchaser of the product. What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc.
MOTOROLA LIMITED WARRANTY What is not covered? (Exclusions) Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse.
Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided "as is" and without warranty. Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable. What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty.
Patent and Trademark Information BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you.
Software Copyright Notice The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software.
Index 2-way radio 130 see also Private calls, group calls, and call alerts 3-way calling 51 Battery care 5 charging 4, 5 door 3 inserting 3 safety 145 Baud rate 133 A C Accessories 17 safety 146 Advanced Voice Mail with Fax 58 Airplane mode 128 power button 6, 128 turning on and off 128 Antenna 16 Attachments 70 see also MMS messages, attachments Audio recordings 89 playing 89 Call alerts 18 deleting 22 queue 21 receiving 21 responding 21 sending 21 sorting 22 viewing 21 Call filtering 137 Call forward
Index Circuit data 85 Clock 130 Contact information Direct Send 96 receiving 36, 97 sending 96 Contacts 19, 32, 40 addressing MMS messages 64 capacity 46 creating entries 41 creating MMS messages 63 deleting 46 icons 40 International numbers 47 pictures 40, 41, 42, 45, 88 ring tones 40, 41, 42 searching 45 showing all entries 46 showing only Private IDs 46 SIM card 40 storing from idle screen 43 storing from Memo 43, 123 storing from MMS messages 73 156 storing from recent calls 37, 43 type 40 voice name 4
security 117 viewing location 114 GPS PIN 132 GPS, see GPS Enabled Group calls 22, 130 making 23 off 23 receiving 23 creating MMS messages 64 storing to Contacts 43 Inbox 59, 71 icons 71 International numbers 52 calling 52 storing 47 H Handset, see phone Headset 129 Hearing Aid Compatibility 148 Java applications backlight 128 deleting 109 memory 109, 122 I K Icons calls 31 Contacts 40 drafts 68 DRM 92 Inbox 71 sent items 69 status 10 voice records 121 Idle screen 7 Keypad 2 locking 132 J L Languag
Index Message notifications 57, 83 setting options 57 Messages 83 see also mobile originated text messaging reading 79 receiving 57, 83 Messages center 56 Mike’s Talk Around 24 channels 25 codes 25 emergency calls 28 private Mike’s Talk Around calls 27 setup options 28 talk range 25 MMS messages 59 attachments 70, 74 calling from 72 creating 59 deleting 69, 72, 76, 78 drafts 67 embedded objects 70 forwarding 68, 72 going to website 73 158 Inbox 71 locking 72 memory 77 message center 71 quick notes 65, 76 r
saving from messages 74 Profiles 134 call filtering 137 changing settings 134 creating 136 deleting 136 editing 136 switching 134 temporary 135 viewing 134 PUK code 13 Q Quick notes 65, 76 see also MMS messages, quick notes R Radio frequency 140 Recent calls 19, 31, 35, 38 addressing MMS messages 65 call alerts 35 contact information 36 creating MMS messages 63 deleting 37 display time 133 pictures 37 storing to Contacts 37, 43 viewing 36 Redialing 33, 130 Ring tones 98 deleting 100 in Contacts 40, 41, 4
Index Speakerphone 34 Speed Dial 33, 41, 42 State Tone 29 Status messages 138 T T9 Text Input, see text entry Talkgroups 22, 130 Text and numeric messages see SMS messages Text display area 8, 31 Text entry 54 database 54 mode 54 Word mode 54 Themes 126 Trademark information 153 Turbo Dial 33 V Voice mail 57 receiving 57 sending calls to 30, 58 Voice name 33, 41 creating 43 160 Voice records creating 120 deleting 121 icons 121 labelling 120 locking 121 memory 122 playing 120 viewing 120, 121 Volume, sett
