Motorola iDEN® Digital Multi-Service Data-Capable Phone i 58sr Phone User’s Guide @NNTN4491A@ NNTN4491A
www.motorola.
Table of Contents Introduction .......................................................................................... 1 Driving Safety Tips .........................................................................................3 Getting Started...................................................................................... 5 i58sr Phone Features .......................................................................................6 Battery ......................................................
Digital Cellular.................................................................................... 53 Making Phone Calls ......................................................................................53 Emergency Calling ........................................................................................58 Receiving a Phone Call .................................................................................58 Ending a Phone Call ................................................................
Using GPS with Map Software ...................................................................101 Datebook............................................................................................ 105 Datebook Icons............................................................................................106 Viewing Your Datebook .............................................................................106 About Datebook Events.........................................................................
Java Applications and GPS Enabled ...........................................................129 Java Memory ...............................................................................................131 Deinstalling Java Applications....................................................................132 Customizing the i58sr Phone ........................................................... 133 Settings ....................................................................................................
IMPORTANT! Read “Safety and General Information” on page 172 before using your i58sr phone.
DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard, Plantation, FL 33328 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i58sr Model Number: H58XAH6RR7AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.
Introduction ongratulations on purchasing your Motorola iDEN i58sr multi-service, data-capable, digital, portable phone. Your i58sr phone offers: • • • • • • • • • • • Phonebook — Your consolidated Phonebook holds up to 250 entries and allows you to store multiple contact numbers for each person, offering you various ways to communicate with your business and personal contacts. SIM Card — Your phone’s SIM card holds all entries stored in your Phonebook.
For more information on these and other features of the i58sr phone, review this User’s Guide. There is a Table of Contents in the front of the guide and an Index in the back of the guide to assist you in finding the specific information you want. NOTE: Some features of your i58sr phone are available only in the iDEN service area, and are indicated as such in this guide. NOTE: This guide describes the features of the i58sr phone as they were set up by Motorola.
Driving Safety Tips Driving Safety Tips “Safety is your most important call!” Your Motorola wireless telephone gives you the powerful ability to communicate by voice — almost anywhere, anytime, wherever wireless phone service is available and safe conditions allow. But an important responsibility accompanies that benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility.
8. Your phone can perform many other functions besides allowing you to make and receive calls. Do not let these features distract you from driving. Use them only when it is safe to do so. 9. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies.1 10. Use your wireless phone to help others in emergencies.
Getting Started This section includes: i58sr Phone Features Page 6 Battery Page 7 Turning Your i58sr Phone On/Off Page 9 Enabling Security Page 11 Receiving Over-the-Air Programming Page 11 Security Features of the i58sr Phone Page 12 Status of Your i58sr Phone Page 24 My Information Page 24 Using T9 Text Input Page 25 5
i 58sr Phone Features Rubber Overmold Antenna Power Button/Status Light Earpiece Speaker Key Volume Control Buttons Display Push-To-Talk Button (PTT) Headset Jack Menu Key Option Key End/Home Key Option Key Photosensor 4-Way Navigation Key End/Home Key Send Key Punctuation Key Back Key/Pause Dialing SIDE VIEW Overmolded Battery Cover for Maximum Capacity Battery Overmolded Battery Cover for High Performance Battery AlphaNumeric Keypad FRONT VIEW Microphone Next Word Key/International Plus Dial
Battery Battery Your i58sr phone comes with a Lithium Ion battery. After attaching the battery, you must charge it before you use it for the first time. See “Charging Lithium Ion Batteries” on page 161 for the charging times for your phone’s battery. The first time you charge your phone’s battery, charge for 30 minutes more than the time shown on page 161. After the initial charging, the battery can be charged in the time shown on page 161.
Detaching the Battery 1 Ensure that the phone is powered off before attempting to detach the battery. 2 Press the battery cover release button and slide the battery cover away from the antenna. 3 Remove the battery by pushing the battery toward the antenna and lifting it out of the phone. Charging the Battery 1 With your phone’s keypad facing up, plug the charger’s accessory connector into the left side of the accessory connector on the bottom of the phone.
Turning Your i 58sr Phone On/Off Battery Charging Status The battery strength indicator icon found on your phone’s display screen shows the charge amount remaining in the battery. When Using Phone Icon Display a b c d Battery Strength Low Battery 11% to 40% 41% to 70% Fully Charged A short, chirp-like sound indicates a low battery. The icon flashes to indicate that you have approximately five minutes of talk time remaining.
3 When the Enter SIM PIN Code screen displays, enter your SIM PIN. (For more information see “SIM Card Personal Identification Number (PIN)” on page 12.) NOTE: The default SIM card PIN is 0000. It is recommended that you change your PIN to prevent fraudulent use of the SIM card (see “Changing the PIN” on page 14). 4 Press B under OK. As your phone connects to the network, you will see a welcome message and a connecting message.
Enabling Security Enabling Security To utilize browser functionality from your service provider, you must enable security the first time you power on your phone or within 20 days of first activation of your phone. 1 When you power on your phone for the first time, after the Ready screen appears, you will be prompted to select OK to update your browser info. NOTE: If you press A under LATER, you will be prompted to enable security each time you power on your phone until you press A under OK.
3 You are prompted to accept changes to your Phonebook. Press A under OK. 4 A confirmation screen displays. Press A under OK. 5 You are prompted again to accept changes to your Phonebook. Press A under OK. 6 A confirmation screen displays. Press A under OK. 7 Press e to return to the Ready screen.
Security Features of the i 58sr Phone Entering the SIM PIN Depending on your Service Provider, your phone may or may not require you to enter a SIM PIN when you first use your phone. If your phone is required to enter a PIN, your default SIM card PIN is 0000. It is recommended that you change your PIN to prevent fraudulent use of the SIM card (see “Changing the PIN” on page 14). IMPORTANT: 1 P Incorrectly entering your PIN three times causes the SIM card to be blocked.
Changing the PIN 1 At the Ready screen, press m and then press R to scroll to Settings. 2 Press B under SELECT. The Settings screen displays. 3 Press R to scroll to Security. Press B under SELECT to access the Security screen. 4 At the Security screen, press R to scroll to New Passwords. Press B under SELECT to access the New Passwords screen. 5 At the New Passwords screen, press R to scroll to SIM PIN and press B under SELECT.
Security Features of the i 58sr Phone Unblocking the SIM PIN If you forget your PIN and unsuccessfully enter it three times, access to your phone will be blocked. NOTE: Before you begin, obtain the PIN Unblocking Key (PUK) code from your service provider, then read and understand the PIN unblocking sequence. In entering the key press sequence, each key press must occur within 5 seconds of the prior key press.
Disabling/Enabling the PIN Requirement When the PIN requirement is enabled, you are prompted to enter your PIN each time you turn on your phone. Until a valid PIN is entered, you can use the phone only to make emergency calls. After the PIN is accepted, the phone registers on the network and the Ready screen displays. When the PIN requirement is disabled, the phone can be used without entering a PIN. P NOTE: If you disable the PIN requirement, you remove protection of personal data on your SIM card.
Security Features of the i 58sr Phone 3 Press R to scroll to Security. Press B under SELECT to access the Security screen. 4 At the Security screen, press R to scroll to SIM PIN. Press B under SELECT to access the SIM PIN screen. 5 Press R to scroll to On or Off. On enables the SIM PIN requirement; Off disables the SIM PIN requirement. Press B under SELECT. 6 At the Verify SIM PIN Code screen, enter the current SIM PIN and press B under OK.
Inserting/Removing the SIM Card IMPORTANT: If you remove your SIM card and insert another SIM card into your phone, the following information is erased when you use the phone with the new SIM card: • • • • Datebook events Recent Calls list Voice Records* Voice names for Phonebook entries and Shortcuts • Call Forwarding settings • Call filtering settings in Styles • Net Alerts • Information stored in Memo • Browser Bookmarks • Previous three GPS location fixes All Phonebook information will remain stored o
Security Features of the i 58sr Phone 3 Lift the SIM cover up. 150 7866 0013 0008 4 To remove the SIM card, very carefully lift it out of its holder. Do not touch the gold-colored areas of the SIM card. NOTE: Protect the SIM card as you would any delicate object. When the SIM card is not in the phone, you should store it in something protective, such as a mailing envelope.
Keypad Lock The i58sr phone includes a Keypad Lock feature that enables you to quickly lock the phone’s keypad to avoid inadvertently pressing keys or placing calls. Once Keypad Lock is activated, you can only perform the following tasks: • • • Turn your phone on and off Unlock the keypad Receive incoming calls, messages, and alerts. NOTE: Emergency calls cannot be placed while Keypad Lock is activated.
Security Features of the i 58sr Phone Receiving Incoming Calls When you receive an incoming phone call (see “Receiving a Phone Call” on page 58), Keypad Lock is temporarily disabled. 1 Press B under YES or press s to answer the call. Or, Press A under NO or press e to send the call to Voice Mail and reactivate Keypad Lock. 2 When you end the call, the Recent Calls list appears. Press e to reactivate Keypad Lock and return to the Ready screen.
Receiving New Voice Mail When you receive new Voice Mail (see “Voice Mail” on page 74), Keypad Lock is temporarily disabled. 1 When New Voice Mail Message displays, press A under EXIT to return to the Ready screen and reactivate Keypad Lock. Or, Press B under CALL to access Voice Mail. 2 Once you have finished, press e to exit Voice Mail. The Recent Calls list displays. Press e to reactivate Keypad Lock and return to the Ready screen.
Security Features of the i 58sr Phone Receiving New Net Alert When you receive new Net Alert, Keypad Lock is temporarily disabled. 1 When New Browser Message displays, press A under EXIT to return to the Ready screen and reactivate Keypad Lock. Or, Press B under GOTO. Press A under View. Press A under OK or Reply. 2 Once you have finished, press e until you reactivate Keypad Lock return to the Ready screen. Deactivating Keypad Lock From the Ready screen, press m then *.
Status of Your i 58sr Phone Your i58sr phone has a status light that displays around the power button. The status light indicates the status of your connection. Status Light Indicator i 58sr Phone Status Flashing Red Signing on to the network. Please wait. Solid Red No service or out of coverage area. Flashing Green In service/Ready to use. Solid Green In use. My Information You can select My Info from the main menu to display or edit the following: • • Name — enter your name in this field.
Using T9 Text Input 3 Use S to scroll through the fields. 4 To edit the displayed information, press B under CHANGE. Edit information as desired, and press B under OK to save the changes. To return to the Ready screen, press A under EXIT. Using T9 Text Input Your i58sr phone has embedded software, called T9® Text Input, that makes typing on a phone keypad much like typing on a computer keyboard: it eliminates the traditional “multi-tap” method of text entry.
Choosing a Text Entry Mode When you are using Phonebook or Datebook, you select your text entry mode from a menu available whenever the phone is displaying a screen that requires you to enter text (for example, the Name screen or Title screen). To choose a text entry mode: 1 From any screen that requires text input, press m to access the Entry Method menu. A check mark appears next to the current text entry mode. When you access a screen that requires text input, the default text entry mode is Alpha.
Using T9 Text Input Using Word Mode In Word mode, T9 Text Input analyzes the letters on the keypad button you press and arranges them to create words. As you type, T9 Text Input matches your keystrokes to words in its database and will display the most commonly used matching word. Special Key Functions Some of your phone’s keys assume different functions while in T9 Text Input Word mode. Backspace and Erase Press A under DELETE once to backspace or to erase a single character.
Press 1 to insert punctuation. One of eight basic punctuation symbols will be inserted (. , - ’ @ : ? ;). Press 0 to change the inserted punctuation symbol to another of the eight basic punctuation symbols. Press R to accept the punctuation and continue typing. NOTE: Additional punctuation symbols are available in Symbols mode. Enter a Word To enter a word using Word mode: 1 Choose Word as your text entry mode. 2 Type a word by using one key-press per desired letter.
Using T9 Text Input 3 Return to Word text entry mode. 4 Press R to add a space. The word you typed in Alpha text entry mode is now in the database. NOTE: You cannot store alphanumeric combinations, such as Y2K. Choosing a Language To change the language of the database T9 Text Input chooses common words from: 1 From any screen that requires text input, press m to access the Entry Method menu. 2 Press S to scroll to Languages. 3 Press B under SELECT.
Using Symbols Mode To use Symbols text entry mode: 1 Choose Symbols as your text entry mode. A row of 32 symbols appears along the bottom of your phone’s display screen, just above the display option and menu icon. (Press T to view the complete row.) 2 Press T to highlight the symbol you want to enter into the text entry field. 3 Press B under SELECT to enter the symbol. www.motorola.
Display Essentials Your i58sr phone’s display screen tells you what you need to know as you use your phone. This section includes: Display Screen Elements Page 31 Text Display Area Page 35 Call Information Icons Page 35 Navigating Menus and Lists Page 35 Main Menu Options Page 36 Display Screen Elements Any time your phone is powered on, the display screen provides you with information and options.
Status Icons Status icons provide you with information about your phone and its functions. These icons are context sensitive; meaning, the icons that appear depend on the task you are performing. Status icons appear in the two rows at the top of the display screen. Some appear at all times. Others appear only when your phone is engaged in certain activities or when you have activated certain features. Icon Indicates... abcd Battery Strength icons — remaining battery charge.
Display Screen Elements ] Mobile IP — phone is ready to access the Internet. { Secure Data — phone is accessing the Internet using a secure connection. } Non-secure Data — phone is accessing the Internet using a non-secure connection. l Roaming — phone is searching for network connections outside your local area. . Text Message — you have one or more Text Messages or Net Alert messages. y Voice Mail — you have one or more Voice Mail messages. B FaxMail — you have one or more FaxMail messages.
The icon of the main menu feature currently in use always appears in the top left of the status icon rows. For a list of the main menu icons, see “Main Menu Options” on page 36. Text Display Area On the Ready screen, the text displayed in this area is determined by your wireless communications provider. When you access other screens, this area displays menu options, messages, names, phone numbers, and other information.
Navigating Menus and Lists Menus are context sensitive. The menu that appears depends on the screen you access it from and the items on the menu apply to the task you are currently performing. Pressing the menu key from the Ready screen accesses the main menu. Display Options Two display options appear at the bottom of most screens. These options enable you to perform a wide variety of actions, including changing, saving and viewing information, running programs, and canceling previous actions.
Down arrow Up arrow B S Main Menu Options By default, the main menu options appear in the order determined by your service provider. You can change the order in which they appear by using the Personalize feature (see “Reordering Main Menu” on page 140). To access the main menu, press m from the Ready screen: Menu Item Net Use to ... Browse the Web. F Java Run pre-installed and download custom Java applications on your phone.
Main Menu Options b Phonebook Store and retrieve a list of stored entries for calling, editing, viewing and deleting. R Messages Receive, store, access and manage Voice Mail, FaxMail, Text Messages, and Net Alert. ; Call Forward Settings for forwarding calls in various situations. = Datebook Schedule and organize events, by the day or the month, such as appointments and meetings. O Memo Input and store numbers to access later.
www.motorola.
Phonebook The Phonebook allows you to store up to 250 frequently used names and numbers. When you store information in your Phonebook, it is saved on your SIM card. If you move your SIM card to another SIM-based Motorola iDEN phone, you can access information in your Phonebook from that phone. NOTE: If you use a different SIM card in your phone, some information stored in the phone will be lost. See “Removing/Inserting the SIM Card” on page 24.
Accessing Phonebook with an i2000, i2000plus, or GSM Phone If you plan to use the information stored in your Phonebook with an i2000, i2000plus, or any other GSM phone, you must purchase CompanionPro. Go to www.motorola.com\iden or your service provider’s web site for more information. You can use CompanionPro to make the Phonebook information saved to your i58sr phone’s SIM card accessible in this type of phone.
Voice Names* K Fax n Talkgroup iP IP (Internet Protocol Address) Z Other For more information on entering phone numbers into your Phonebook, see “Adding Phonebook Entries” on page 44. The “picker” arrows appearing around the phone number type icon indicates multiple phone numbers stored under one name: ef pickers The Voice Name* icon appearing to the left of one of the phone number type icons indicates that a voice name is associated with the Phonebook entry: p Voice Name *Optional feature.
If PHBK is not one of your display options: 1 From the Ready screen, press m. 2 Press R to scroll to Phonebook. 3 Press B under SELECT. USER TIP:You can also access the Phonebook by pressing m while your phone is in a phone call or private call. This brings you to the Phonebook screen. From this screen, you can view, sort, add, edit, and delete Phonebook entries, check Phonebook capacity, or make calls.
About Phonebook Entries To view any of the phone numbers assigned to a name: 1 From the Phonebook screen, press S to scroll to the name associated with the phone number you want to see. 2 Press T to view the icons representing the phone numbers assigned to that name. 3 When the icon representing the number you want to view is displayed, press B under VIEW. If there is a Private ID or a Talkgroup number stored for the person, press m. Then press R to scroll to View and press B under SELECT.
3 Press B under SELECT. 4 Press R to scroll to the desired sorting method: Name or Speed #. 5 Press B under SELECT. Checking Phonebook Capacity Your Phonebook can store up to 250 numbers of any kind. To see how many entries are stored in your Phonebook: 1 From the Phonebook screen, Press m to view the Phonebook Menu screen. 2 Press R to scroll to Capacity. 3 Press B under SELECT. The Capacity screen shows how many storage spaces in you Phonebook are in use and how many are empty.
About Phonebook Entries To add a Phonebook entry: 1 Access the Entry Details screen: From the Phonebook screen with [New Entry] highlighted, press B under SELECT. Or, From the Phonebook screen, press m. Then press R to scroll to New and press B under SELECT. 2 If you want to assign a name to your Phonebook entry: With the Name field highlighted, press B under CHANGE. From the Name screen, enter the name using the alphanumeric keypad.
4 Assign a phone number to your Phonebook entry: With the # field highlighted, press B under CHANGE. Type the number using the alphanumeric keypad. For phone numbers, use the 10-digit format. To delete a digit, press A under DELETE. K See “Pause Digit Entry” on page 51 and “Plus Dialing” on page 52 for information on using these features when storing phone numbers in you Phonebook. NOTE: The number can be up to 20 characters long. When you are finished, press B under OK.
About Phonebook Entries 6 If you want to assign a voice name* to the number: *Optional feature. Please consult your service provider for availability of purchase. With the Voice Name field highlighted, press B under RECORD. As directed by the screen prompts, say and repeat the name you want to assign to the number. Speak clearly into the microphone. M An ) icon appears in the Voice Name field indicating that the voice name has been recorded. USER TIP: For best results, record in a quiet environment.
8 When you have entered all the information you wanted in this Phonebook entry, press A under DONE. N Storing Phone Numbers and Private IDs Quickly Your phone gives you three ways to store phone numbers quickly: from the Ready screen, from the Recent Calls list, and from Memo. To store a number from the Ready screen: 1 From the Ready screen, use the alphanumeric keypad to enter the number you want to store. 2 Press m to access the Dialing Menu screen.
About Phonebook Entries 6 From the Type Editor screen, press S to scroll to the selection that you want to assign to the phone number. Press B under SELECT. 7 If you want to add more information to the Phonebook entry, follow the applicable instructions in “Adding Phonebook Entries” on page 44. 8 Press A under DONE. To store a number from the Recent Calls list: 1 From the Recent Calls screen, press R to scroll to the 10-digit telephone number you want to store. 2 Press B under STORE.
To store a Private ID from the Recent Calls list: 1 Press R to scroll to the Private ID number you want to store. NOTE: The Store option for Private ID numbers (e.g., 123*123*1234), will not display in the Recent Calls list. 2 With the Private ID highlighted, press m to access the Rec. Calls Menu. Press R to scroll to Store. Press A under SELECT. This displays the Store To screen with [New Entry] highlighted. Follow steps 3 through 6 in “To store a number from the Recent Calls list” (listed on Page 49).
Pause Digit Entry 3 Press R to scroll to Edit. 4 Press B under SELECT. The Entry Details screen displays. 5 Follow the applicable instructions in “Adding Phonebook Entries” on page 44 to edit the various fields. Deleting Phonebook Entries 1 From the Phonebook screen, press R to scroll to the entry you want to delete. 2 Press m to view the Phonebook Menu. 3 Press R to scroll to Delete Contact or Delete Number. Delete Contact deletes the name and all numbers associated with that name.
You can program your phone to enter all of the above information for you. All you have to do is separate each entry with a pause. If you were to program your phone to automatically input the above information, the stored data would look like this 17035551234P#P1234. In this example, the first eleven digits represent the number that must be dialed to access your voice mail. The P represents a 3 second pause. The # interrupts your greeting. The second P represents another 3 second pause.
Digital Cellular The i58sr phone enables you to make and receive domestic and international phone calls, make emergency calls, and be notified of a missed call. This section includes: Making Phone Calls Page 53 Emergency Calling Page 58 Receiving a Phone Call Page 58 Ending a Phone Call Page 58 Recent Calls Page 58 Call Waiting Page 64 Hands Free Speakerphone* Page 62 Call Timers Page 64 Call Hold Page 66 Three-Way Calling Page 66 Call Forwarding Page 67 *Optional feature.
Using Direct Dial 1 From the Ready screen, use the keypad to enter the number you want to call. 2 Press s to place the call. 3 Press e to end the call. NOTE: See “Plus Dialing” on page 52 for information on making international calls. If you make a mistake: To clear one digit, press A under DELETE. To clear all digits, press and hold A under DELETE. To cancel, press e.
Making Phone Calls 3 If more than one number is stored for the person you want to call, ef appears around the icon to the right of the person’s name. Press T to scroll through the icons representing the numbers stored for that person. Or, Press B under VIEW to view all the numbers stored for this person. Then press R to scroll to the number you want to call. For more information on assigning multiple numbers to one person, see “Adding Phonebook Entries” on page 44. 4 Press s to place the call.
4 Press s to place the call. 5 Press e to end the call. Using Speed Dial Each phone number stored in your Phonebook is assigned a Speed Dial number. You can use the Speed Dial number to quickly place a call. 1 From the Ready screen, enter the Speed Dial number assigned to the phone number you want to call. 2 Press #. 3 Press s to place the call. 4 Press e to end the call.
Making Phone Calls Making TTY Calls NOTE: This feature may not be offered by your service provider. You can use your phone to make calls using a TTY device. When you make a TTY call, the call begins in the TTY mode you last selected. You can change the TTY mode during a call. For more information on choosing a TTY mode, see “Setting TTY Mode” on page 147. Q To make a call using a TTY device: 1 Connect one end of a 2.5mm cable into the jack on the phone. (To locate the jack, see page 6.
3 Press s to place the call. 4 Press e to end the call. Emergency Calling Your phone supports emergency calling. Emergency calls can be made even when the SIM card is blocked or not in the phone. Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911.
Recent Calls • • • • view your recent calls store numbers to the Phonebook delete recent calls call numbers on the Recent Calls list NOTE: The Recent Calls list displays briefly after you end a call. Viewing Recent Calls To view your Recent Calls list: 1 From the Ready screen, press R. Or, From the Ready screen, press S to scroll to Recent Calls. Press B under SELECT. 2 Press S to scroll the list of recent calls.
Getting Detailed Information About Recent Calls To get more information about a recent call: 1 From the Recent Calls screen, press S to scroll to the call you want more information on. 2 Press m to access the Rec. Calls Menu. Then press R to scroll to View and press B under SELECT. The Call Details screen that appears displays information such as the name associated with the phone number of the recent call, the phone number, the date, time, and duration of the call.
Recent Calls Deleting Recent Calls To delete a recent call: 1 From the Recent Calls screen, press S to scroll to the call you want to delete. 2 Press m to access the Rec. Calls Menu. 3 Press R to scroll to Delete. 4 Press B under SELECT. 5 Press A under YES to confirm the deletion. To delete all calls on the Recent Calls list: 1 From the Recent Calls screen, press m to access the Rec. Calls Menu. 2 Press R to scroll to Delete All. 3 Press B under SELECT.
Hands-Free Speakerphone* This feature provides the convenience of a hands-free solution, allowing you to hold impromptu meetings and place safer phone calls. The speakerphone option (SPEAKER) is available whenever you are on an active phone. *Optional feature. Please consult your service provider for availability of purchase. To turn the speakerphone on: While on an active call, press B under SPEAKER. While speakerphone is on, Spkrphone On appears in the text display area.
Call Timers Call Timers Call Timers measure the duration of your phone calls, Private or Group calls, and circuit data use, as well as the number of Kilobytes sent and received by your phone. The Call Timers menu displays the following options: • • Last Call — displays the duration of your most recent phone call. Phone Reset — keeps a running total of your phone call minutes, until you reset it. Phone Lifetime — displays the total minutes of all your phone calls.
2 Press B under SELECT. 3 If the feature does not include an option to reset or you do not wish to reset the option, press A under DONE when you are finished viewing. To reset a feature, press B under RESET. When the confirmation screen appears, press A under YES to confirm the reset. NOTE: The values displayed by Call Timers are not intended for billing purposes. Call timers are estimates only. Call Waiting Call Waiting allows you to receive a second call while you are talking on the phone.
Call Waiting Switching Between Calls When you accept a second call while you are talking on the phone, your display shows the name or number of each call. An icon appears to the left of each name or number indicating that the call on hold V or active D. Press B under SWITCH to switch between calls. Declining Calls Press A under NO. If you subscribe to Voice Mail, the call will be forwarded to your Voice Mail box. Ending the Active Call Press e.
Call Hold When you are on an active call, you can place the call on hold and make a second call. To place an active call on hold: 1 Press m to access the Calls Menu. 2 Press R to scroll to Hold. 3 Press B under SELECT. 4 If you have not placed a second call, you can resume this call by pressing B under RESUME. To place a second call while the first call is on hold: 1 Enter the second phone number you want to call. Or select the number from your Phonebook by pressing m and selecting Phonebook.
Call Forwarding To make a three-way call: 1 Place or receive a phone call. 2 While in a call, press m to access Call Menu. 3 Press R to scroll to 3-WAY. 4 Press B under SELECT. The first call will be placed on hold. 5 Enter the second phone number you want to call and press s to place the second call. Or, access the number from your Phonebook: Press m and then press R to scroll to Phonebook. Press B under SELECT. To place the call, see “Making Calls from the Phonebook” on page 54.
You can forward Line 1 and Line 2 independently. When your phone is set to forward all calls, one of the following icons appears on the top row of your display screen to indicate the call forwarding option you have chosen: Icon Indicates... G Line 1 is active; calls from Line 1 are being forwarded. H Line 1 is active; calls from Line 2 are being forwarded. I Line 1 is active; calls from Line 1 and Line 2 are being forwarded. J Line 2 is active; calls from Line 1 are being forwarded.
Call Forwarding 7 To activate a call forwarding number: If you have never used Call Forwarding before, the Forward screen appears. To enter a call forwarding number, type the number on your phone’s keypad or press B under SEARCH to select from numbers stored in your phone. Press B under OK. Or, If you have used Call Forwarding before, the call forwarding number you last used is displayed. Press B under CHANGE to access the Forward screen. To forward your calls to this number, press B under OK.
3 Press R to scroll to the To field and press B under CHANGE. 4 Press S to scroll to Off and press B under SELECT. { You will now receive all calls on your phone. When you are unavailable, your calls will be forwarded according to your Detailed call forwarding settings. By default, the Detailed option is set to forward your calls to Voice Mail.
Call Forwarding 6 Enter your Voice Mail access number. Your Voice Mail access number is the first six digits of your 10-digit phone number, followed by 6245. (For example 7035556245.) 7 Press B under OK. 8 Repeat step 3 through step 7 for the If No Answer field and the If Unreachable field. 9 When finished, press A under EXIT.
www.motorola.
Messages The main topics covered in this section are listed below: Message Center Page 73 Voice Mail Page 74 Text and Numeric Messaging Page 76 Net Alert Page 78 Using Your Phone as a Modem Page 79 Message Center The Message Center enables you to access all messaging services through one screen. To access the Message Center: If MESG is one of your display options: From the Ready screen, press B under MESG. If MESG is not one of your display options: 1 From the Ready screen, press m.
To access any message service: 1 From the Message Center screen, press R to scroll to the message service you want to access. 2 Press B under the display option on the right. This option varies depending on the message service selected. Voice Mail New Message Indicators When you receive a new message: • New Voice Mail Message will display on the screen. f • Your phone will alert you every 30 seconds until you press B under CALL or A under EXIT.
Using Voice Mail Using Voice Mail Logging Into Voice Mail 1 From the Ready screen, press B under MESG to open up the Message Center screen. 2 Voice Mail should be highlighted to indicate that it is selected. If it isn’t highlighted, press S to scroll to the Voicemail field. The number of new messages and the total number of messages are displayed. 3 A g Press B under CALL to log into your Carrier’s Voice Mail System. Calling displays as you are connected to the network.
Text and Numeric Messaging With Text and Numeric Messaging, your phone will: • • • • • • • • • Allow numeric messages up to 20 characters in length and text (alpha) messages up to 140 characters in length. Accept your messages even if you are unavailable, if your phone is turned off, or if you are busy on another call. Alert you of a new text or numeric message, even if you are on another call. Store a message if you are making a Private or Group call and deliver it upon completion of the call.
Text and Numeric Messaging New Messages Indicators When you receive a new message: • New Text Message will display on the screen. i Your phone will alert you every 30 seconds until you press B under READ or A under EXIT. (If you are on a call, your phone will alert you once during the call.) • Accessing New Messages When you receive a message, you can view it immediately or later: View a Message Immediately 1 Press B under READ. The message displays.
Viewing Stored Messages 1 In the Message Center screen, press S to scroll down to Text Msgs. The number of new messages and the total number of messages are displayed. 2 Press B under SELECT. The Text Msg Inbox screen appears. 3 Press S to scroll to the message you want to read and press B under READ. 4 If the message fills more than one screen, use S to scroll through the rest of the message. 5 Press A under SAVE to save the message. Or, Press B under DELETE to delete the message.
Using Your Phone as a Modem You can view new or stored Net Alert messages at any time by access the Message Center. For more information, see “Message Center” on page 73. Using Your Phone as a Modem NOTE: Some features may be network dependent or subscription only, and may not be available in all areas. Contact your service provider for more information. You can use your i58sr phone as a modem for data transfer from your laptop, handheld device, or desktop computer.
www.motorola.
Private Calls The main topics covered in this section are listed below: Private Call Page 81 Call Alerts Page 84 Group Call Page 88 Private Call There are two ways to reach an individual using Private calls. You can enter the person’s Private ID number then press the Push-To-Talk (PTT) button. Or, you can store the person’s name and Private ID number, then recall the number from your Phonebook.
3 From the Phonebook screen, press S to scroll through the names until the desired name is highlighted. If more than one number is stored for an entry, press T until idisplays. 4 Press and hold the PTT button on the side of the phone. Begin talking after the phone emits a chirping sound. 5 Release the PTT button to listen. Making a Private Call from the Recent Call List 1 From the Ready screen, press m. 2 Press R to scroll to the Recent Calls. Press B under SELECT.
Private Call 2 Press and hold the PTT button. Begin talking after the phone emits a chirping sound. 3 Release the PTT button to listen. Storing Private IDs For information store Private ID numbers to your Phonebook, see “Adding Phonebook Entries” on page 44. For information on how to quickly store Private ID numbers, see “Storing Phone Numbers and Private IDs Quickly” on page 48. 1 From the Ready screen, press m. 2 Press R to scroll to the Recent Calls. Press B under SELECT.
example, if the voice name “Joe” fails to place a call to Joe Smith’s number, try assigning the voice name “Joe Smith” to the number. Call Alerts You can send a call alert, which lets recipients know that you would like to talk with them. When you send an alert, the recipient will receive a series of beeps and your name or Private ID will appear on the display. Placing a Call Alert from the Keypad 1 Enter the Private ID of the person you want to call. 2 Press B under ALERT.
Call Alerts 4 Press B under ALERT. The Ready to Alert screen appears. 5 Press and hold the PTT button until Alert Successful displays. The alert sounds intermittently until the user of the phone answers, queues, or clears the alert. V Ready to Alert Screen Ready to Alert is used to confirm your request for the alert and to prompt you to push the PTT button: • • • • If you press the PTT button, the call alert is sent, and the phone displays the Recent Calls screen.
Call Alert Queue Call alert queuing enables you to save call alerts in a list, or queue. To store a call alert in the call alert queue, press B under QUEUE when you have received an incoming call alert. Accessing the Call Alert Queue 1 From the Ready screen, press m. 2 Press R to scroll to Call Alert. 3 Press B under SELECT. The Call Alert Queue screen displays.
Call Alerts 4 Press S to scroll to First on Top or Last on Top. 5 Press B under SELECT. Responding to a Call Alert From the Queue 1 From the Call Alert Queue screen, press S to scroll to the call alert you want to respond to. You can respond by sending a call alert or placing a Private call. 2 To send a call alert, press B under ALERT and then press the PTT button. Or, To place a Private call, press the PTT button. The call alert will be removed from the queue.
To delete all call alerts from the queue: 1 From the Call Alert Queue screen, press m to access Call Alert Menu. 2 Press R to scroll to Delete All. 3 Press B to SELECT. 4 When the confirmation screen appears, press B under YES to delete the entry. Group Call In a Group call, you can communicate instantly with a group of people that you have previously set up as a Talkgroup. Your sales representative must set up your Talkgroups by providing you with a Talkgroup number for each Talkgroup.
Group Call 7 Enter the Talkgroup name or number. 8 When you have completed the Entry Details, press A under DONE. Making a Group Call from the Keypad 1 Press # and then enter the Talkgroup number of the group that you want to call. 2 Press and hold the PTT button on the side of the phone or press B under ALERT, and speak. The phones of individuals in the Talkgroup will emit a chirping sound to alert them that someone is calling. 3 Release the PTT button to listen.
Making a Group Call from the Recent Calls List 1 From the Recent Calls screen, press R to scroll to the name of the Talkgroup you want to call. 2 Press and hold the PTT button on the side of the phone, wait for your phone to emit a chirping sound, and speak. The phones of individuals in the Talkgroup may emit a chirping sound to alert them that someone is calling, or may simply emit the sound of your voice when you start speaking.
Group Call To join an ongoing Talkgroup: 1 Using the keypad, press # then enter the Talkgroup number. Or, From the Phonebook screen, press R to scroll to the name of the Talkgroup you want to call. Or, If the Talkgroup you want to join is on your Recent Call list, go to the Recent Call screen and press R to scroll to the name of the Talkgroup you want to call. 2 Press B under JOIN. Group-Silent Programming Group-Silent programming enables you to silence incoming Group alerts and voice communication.
www.motorola.
GPS Enabled Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.
IMPORTANT: Things to Keep in Mind If you are using your phone’s GPS feature while driving, please give full attention to driving and to the road. Where adequate signals from multiple satellites are not available (usually because your GPS antenna cannot establish a view of a wide area of open sky), the GPS feature of your phone WILL NOT WORK. Such situations include but are not limited to: • • • • • • • In underground locations. Inside of buildings, trains, or other covered vehicles.
Making an Emergency Call The satellites used by your phone’s GPS feature are controlled by the U.S. government and are subject to changes implemented in accordance with the Department of Defense GPS user policy and the Federal Radionavigation Plan. These changes may affect the performance of your phone’s GPS feature. Making an Emergency Call Dial 911 to be connected to an emergency response center. If you are on an active call, you must end it before calling 911.
Accessing the GPS Menu To access the GPS menu: 1 From the Ready screen, press m. 2 Press R to scroll to GPS. 3 Press B under SELECT. Viewing Your Approximate Location To view your location: 1 From the GPS screen, press R to scroll to Position. 2 Press B under SELECT. 3 To view the entire displayed screen, press S to scroll.
Viewing Your Approximate Location • the number of satellites used to calculate the location. In general, more satellites make for better accuracy. mn To calculate your location again: Press B under RFRSH. It may take your phone several minutes to complete the process of determining your location. During this time, a message usually displays on your phone’s screen saying your phone is scanning for satellites. For tips on getting the best location calculation, see “Enhancing GPS Performance” on page 98.
Enhancing GPS Performance Sometimes your phone’s GPS feature may be unable to complete a location calculation successfully. If this happens when you are making an emergency call, the location of the nearest cell tower in contact with your phone is made available to the appropriate emergency response center if the center has the capability to receive such information.
Updating Satellite Almanac Data • In a car. When using the GPS Enabled feature in a car, position the phone so that the GPS antenna has good access to GPS signals through the car’s windows. Typically, the GPS antenna has best access to GPS signals in a car when placed near a window. NOTE: Although moving the phone at a walking pace decreases GPS performance, moving it at the speed of a moving car does not. • Stay in network coverage.
• By Permission — When an application attempts to view your phone’s location, you will be prompted to give permission. However, a different privacy protection mechanism may apply to those customers who purchase a dispatch application. NOTE: Privacy options do not apply to the transmission of location information during emergency 911 calls. To set your GPS privacy options: 1 From the GPS screen, press R to scroll to Privacy. 2 Press B under SELECT.
Using GPS with Map Software 5 Press R to scroll to On or Off. On enables the GPS PIN requirement; Off disables the GPS PIN requirement. Press B under SELECT. 6 At the Verify GPS PIN Code screen, enter the current GPS PIN and press B under OK. NOTE: When you receive your phone, your GPS PIN is 0000. To change your GPS PIN: 1 At the Ready screen, press m and then press R to scroll to Settings. 2 Press B under SELECT. 3 Press R to scroll to Security and press B under SELECT.
To do this, connect your phone to your laptop (or other device) with a data cable and set your phone to transmit data (see “Getting Started” on page 102). Your phone then provides your approximate location to the device running the map software, which displays your location on a map. Your phone provides an updated location every second and the map software displays your changing location on its map. See “Enhancing GPS Performance” on page 98 for more details on obtaining good location information.
Using GPS with Map Software • Flow control: Hardware To set your phone to send location information to your laptop or other device: 1 From the GPS screen, press R to scroll to Interface. 2 Press B under SELECT. 3 Press B under CHANGE. 4 Press S to scroll to On. 5 Press B under SELECT. Your phone is now sending location data to your laptop or other device. To stop your phone from sending location data to your laptop or other device: Set Interface to Off and press B under SELECT.
www.motorola.
Datebook The Datebook is a calendar in your i58sr phone that enables you to schedule and organize events, such as appointments and meetings. Schedules can be created and viewed for specific days, and reminder alarms can be set so that you never miss important events. You can view upcoming events by week or by day. The Datebook stores and manages 250 events over a 13-month period (12 months ahead and 1 month back). NOTE: The time and date format and the year used in Datebook can be set by you.
Datebook Icons There are several icons commonly used in the Datebook application: Symbol Description C Event without a start/ end time f More options are available j Recurring Appointment I Datebook Alarm G Used to move through fields when setting a time and date. Viewing Your Datebook To access your Datebook: 1 From the Ready screen, press m. 2 Press R to scroll to Datebook. 3 Press B under SELECT.
Viewing Your Datebook Viewing a Week When you access your Datebook, the current week is displayed. You can scroll to other weeks by pressing S. Event without a start/end time c Displayed week Days of week Events The dates of the displayed week appear at the top of the text area of your phone’s screen. Below the dates are letters indicating the days of the week. When you access your Datebook, the current day is highlighted. You can scroll to other days by pressing T.
Viewing Event Details To view the details of an event: 1 Select and view the day containing the event you want to view. 2 Press S to scroll to the event. 3 Press B under VIEW. This displays event details such as day of week, time, title, duration, alarm time, and repeat cycle. For more information about events, see “About Datebook Events” on page 108. Viewing Today You can easily go to the current day when viewing your Datebook: 1 While viewing any week, day, or event, press m.
Adding New Events Adding New Events Using the following instructions, you will enter the information in the order the items appear on the Event Form screen. However, you can enter this information in any order by pressing S to scroll through the items on the Event Form screen. You can leave any item blank or unchanged by pressing S to scroll past it on the Event Form screen. Only a title and a date are required for a valid event.
3 Assign a title to the event: Press B under BROWSE to choose from a list of commonly used event titles. Press S to scroll to the title you want and press B under SELECT. Or, Type the title using the alphanumeric keypad. See “Using T9 Text Input” on page 25 for information about entering text into this field. You can also enter a description of the appointment or any other text. When you are finished, press B under OK. The Event Form screen returns with the Start field highlighted.
Adding New Events 6 The default date assigned to an event is the day that was highlighted when you accessed the Event Form screen to add the event. To assign a different date: With the StartDate field highlighted, press B under CHANGE. From the StartDate screen, enter the date of the event: Type in the date, or press S to scroll through the months, days, and years. Press T or press B under G to move through the fields. Press A under DONE. The Event Form screen returns with the Repeat field highlighted.
8 If you want to set an alarm to remind you that the event is approaching: With the Alarm field highlighted, press B under CHANGE. From the Alarm screen, press S to scroll to the desired alarm option. Y If you choose the 1 day before option, the alarm will remind you at your daily begin time (see “Customizing Datebook Set Up” on page 114) the day before the event, rather than 24 hours before the event.
Editing Events Editing Events 1 If you are viewing the week containing the event: Press B under EDIT. Or, If you are viewing the day containing the event: Press m to display the Datebook Menu. Press R to scroll to Edit and press then B under SELECT. 2 Follow the applicable instructions in “Adding New Events” on page 109, to edit the various fields. Deleting Events 1 View the day containing the event and press S to scroll to the event you want to delete.
Datebook Event Reminders If you have set an alarm to remind you that a Datebook event is approaching, your phone sounds an audible alarm and displays a reminder. NOTE: You must have the Time and Date display turned on to receive event reminders. This is the default setting. When a Datebook event reminder appears on the screen: Press A under VIEW to view more information about the Datebook event. Or, Press A under EXIT to dismiss the event reminder.
Customizing Datebook Set Up To customize your Datebook set up: 1 While viewing a week in the Datebook, press m to access the Datebook Menu. 2 Press S to scroll to Setup and then press B under SELECT 3 Press R to scroll to any of the set-up features. Press B under CHANGE. Use the screens that appear to make your changes.
www.motorola.
Memo The Memo application provides you with a place to store a numeric note in your i58sr phone. You may call this number or store it in your Phonebook. This section includes: Creating a Memo Page 117 Viewing a Memo Page 117 Editing the Memo Page 118 Deleting the Memo Page 118 Making a Call to the Memo Number Page 118 Storing the Memo Number to Phonebook Page 119 Creating a Memo 1 From the Ready screen, press m. 2 Press R to scroll to Memo. 3 Press B under SELECT. The Memo screen displays.
Editing the Memo 1 From the Ready screen, press m. 2 Press R to scroll to Memo. 3 Press B under SELECT. 4 Type the new number. You can delete a digit by pressing A under DELETE. To all the digits, press and hold A under DELETE. 5 Press B under STORE. Deleting the Memo 1 From the Ready screen, press m. 2 Press R to scroll to Memo. 3 Press B under SELECT. 4 Press and hold A under DELETE. 5 Press B under STORE. Making a Call to the Memo Number 1 From the Ready screen, press m.
Storing the Memo Number to Phonebook Storing the Memo Number to Phonebook 1 From the Ready screen, press m. 2 Press R to scroll to Memo. 3 Press m. With Store to PHBK highlighted, press A under SELECT. 4 Press A under SELECT. This displays the Store To screen with [New Entry] highlighted. 5 To create a valid Phonebook entry, you must assign a type. Press R to scroll to the Type field. 6 Press B under CHANGE. Press R to scroll to the type of number you want to assign to the Phonebook entry.
www.motorola.
Voice Record* The Voice Record feature of your i58sr phone enables you to record and play back personal messages or the incoming portion of phone calls on your i58sr phone. *Optional feature. Please consult your service provider for availability of purchase.
2 Press R to scroll to VoiceRecord. 3 Press B under SELECT. Recording a Voice Record NOTE: Recording of phone calls is subject to varying State and Federal laws regarding privacy and recording of phone conversations. To record a personal message as a Voice Record: 1 From the VoiceRecord screen, press R to scroll to [New VoiceRec]. 2 Press B under RECORD and speak the message you want to record into the microphone. 3 When you are finished recording your Voice Record, press B under STOP.
Adding to a Voice Record Adding to a Voice Record After you create a Voice Record, you can record more at the end of the existing Voice Record: 1 From the VoiceRecord screen, press R to scroll to the Voice Record you want to add to. 2 Press m to view the VoiceRecd Menu. 3 Press R to scroll to Add To. 4 Press B under SELECT and speak the message you want to record into the microphone. 5 When you are finished recording, press B under STOP.
Deleting a Voice Record To delete a Voice Record: 1 From the VoiceRecord screen, press R to scroll to Voice Record you want to delete. 2 Press m to view the VoiceRecd Menu. 3 Press R to scroll to Delete and press B under SELECT. 4 A confirmation screen appears. Press A under YES to confirm. To delete all unlocked Voice Record: 1 From the VoiceRecord screen, press m to view the VoiceRecd Menu. 2 Press R to scroll to Delete All and press B under SELECT. 3 A confirmation screen appears.
Voice Record Memory Voice Record Memory Typically, you can store 20 Voice Record with a total time of about three minutes. To check the amount of memory available for Voice Record: 1 From the VoiceRecord screen, press m to view the VoiceRecd Menu. 2 Press R to scroll to Memory. 3 Press B under SELECT to display the Memory Meter screen. The memory meter shows the amount of Voice Record memory space currently in use. It fills in from left to right as your Voice Record memory space fills up.
www.motorola.
Java The Java feature of your i58sr phone runs programs, or applications, written in the Java 2 Micro Edition programming language. The phone comes with Java applications downloaded and ready for installation. You can choose to order or purchase Java applications and download them into your phone via the Internet. For more information, see “Downloading Java Applications” on page 129.
The Java menu displays all of your Java applications. Installing Java Applications To install a Java application: 1 From the Java Apps screen, press R to scroll to the desired application. 2 To determine whether the application needs to be installed, look at the display options on the screen. If the display option is RUN or SELECT, the application is already installed and ready to run. See “Running Java Applications” on page 128.
Downloading Java Applications To resume a suspended application: Press B under RESUME. To stop running an application: Press e and then press A under EXIT. Downloading Java Applications You can customize your phone by ordering additional Java applications via the iDEN Update Website. Please go to www.motorola.com/idenupdate for a selection of applications available and downloading instructions.
See “Setting Privacy Options” on page 99 for information on choosing one of these options. Granting or Denying Permission If you choose the By Permission option, you have several ways to grant or deny each Java application access to your phone’s location. When a given Java application attempts to access your phone’s location for the first time, a screen appears informing you that the Java application is requesting a read on your phone location.
Java Memory You may choose one of three privacy settings for each Java application: • Always — The Java application always has permission to access your phone’s location, without notifying you. Ask — When the Java application requests access to your phone’s location, you will be prompted to grant or deny permission (see “Granting or Denying Permission” on page 130).
To check how much memory your phone has available for Java applications: 1 From the Ready screen, press m. 2 Press S to scroll to Java Apps. Press B under SELECT. 3 From the Java Apps screen, press S to scroll to Java System. Press B under SELECT. 4 Press B under NEXT to go to the Java System screen. The Data Space and Prog. Space information will be available. You may free more Data Memory and Program Memory space by deinstalling an application that you do not wish to use.
Customizing the i58sr Phone You can customize your i58sr phone to fit the way you want to use it. This section includes: Settings Page 133 Styles Page 150 Shortcuts Page 155 Settings Using Settings, you can set or change a wide variety of your phone’s features. To access Settings: 1 From the Ready screen, press m. 2 Press R to scroll to Settings. 3 Press B under SELECT.
• • • VoiceVolume — sets the volume of your phone’s earpiece and speaker. Tkgrp — sets certain Talkgroup options. Service Status — shows the status of your phone’s services. To access any of these options: 1 From the Settings screen, press R to scroll to the option you want to access. 2 Press B under SELECT. Many of these options have other options within them.
Settings Ring Style and Notification Type When you set VibeAll to On, your phone vibrates to notify you of all types of calls, messages, and alerts. When you set VibeAll to Off, the following features display after VibeAll on the Ring/Vibrate screen, enabling you to set notification options for each: • • • • • • • • Line 1 — sets the ring style and type of notification for calls on Line 1. Line 2 — sets the ring style and type of notification for calls on Line 2.
The following icons appear on the second row of your display screen to indicate the options you have chosen: Icon Indicates... - Vibrate All — phone is set to vibrate when you receive all types of calls, messages, and alerts; the VibeAll option is On. [ Vibrate On — phone is set to vibrate when you receive phone calls. \ Vibrate Then Ring — phone is set to vibrate and then ring when you receive phone calls. * Silent — phone is set not to ring.
Settings Ring Styles When you set a ring style, you can choose from any of nine pre-set ring styles. To set a ring style: 1 From the Ring/Vibrate screen, ensure that VibeAll is set to Off. Then press S to scroll to any of the features that allow you to set a ringer style: Line1, Line2, or Call Alert. 2 Press B under SELECT. 3 With the Style field highlight, press B under CHANGE. 4 Press R to scroll to the ring style you want to assign to the feature.
In Call Setup In Call Setup sets the in-call timer, message notification, and call-waiting features. • • • The In Call Timer option turns the following features on and off: • Display — the duration of the current call displays on the phone’s screen. • Minute Beep — an audible beep occurs every minute of an active call. The Notifications option controls message notification during calls: • Receive All — notifies you of all types of messages during calls.
Settings Phone lock provides two options for locking the phone: • • Lock Now locks the phone immediately after you set the option. Auto Lock locks the phone the next time the phone is powered on. Setting Keypad Lock The i58sr phone includes a keypad lock feature that enables you to lock your phone’s keypad to avoid inadvertently pressing or replacing calls. See “Keypad Lock” on page 20 for more information on locking the keypad.
• GPS PIN — this code is used to access the privacy setting the control access to your phone’s GPS Enabled location by Java applications. When you get your phone, your GPS PIN is 0000. If you want to protect your GPS Enabled privacy settings, you should change this to a GPS PIN known only to you as soon as your get your phone. For more information on your GPS PIN, see “Setting the GPS PIN Security Feature” on page 100.
Settings Changing Ready Screen Options Two options from the main menu always appear on your Ready screen above the left and right option keys. Each option can be accessed by pressing the corresponding option key. Your phone arrives with Phonebook (PHBK) assigned to the left option key (B) and Messages (MESG) assigned to the right option key (B). You can assign any Main Menu option you want to the option keys. 1 From the Personalize screen, press R to scroll to Keys. 2 Press B under SELECT.
4 Press R to scroll to the option you want to appear when the phone is powered on. 5 Press B under SELECT. Initial Setup Initial Setup enables you to control a variety of your phone’s features that you may want to modify when you first get your phone: • • Time/Date Format — sets the format in which the time and date display on your phone. Year — sets the current year. NOTE: Changing the current year may affect stored Datebook events.
Settings • • Alert Timeout — controls the amount of time the Call Alert tone sounds. Return to Home — controls how long the Recent Calls screen displays before returning to the Ready screen after phone and private/group conversations. Changing Time and Date Format Your phone displays times in 12-hour-clock format (12:00 am through 11:59 pm) or 24-hour-clock format (0:00 through 23:59). It displays dates in month/ day format or day/month format.
3 To change the date format: Press S to highlight Date Format, and press B under CHANGE to access Date Format screen. Press S to highlight the date format you want. Press B under SELECT. 4 To turn the time and date format on or off: Press R to highlight Display, and press B under CHANGE to access Display screen. Press S to choose Off or On. Press B under SELECT.
Settings Setting Photo Sensor To conserve battery power, the photosensor will disable the backlight when you are in good lighting conditions. To force the backlight to come on every time a key is pressed, you can turn the photosensor off. NOTE: Setting the Backlight to come on continuously while the Photosensor is turned on will drain your battery power. 1 From the Initial Setup screen, press R to scroll to Sensor. 2 Press B under CHANGE. 3 Press S to scroll to the desired option.
NOTE: Unless otherwise noted, illustrations in this User’s Guide depict Standard view. Setting Scrolling You can set your phone to scroll through menus and lists in either of two ways: • Up/Down — when you reach the bottom or top of list or menu scrolling stops until you scroll in the other direction. Wrap Around — when you reach the bottom or top or a list or menu scrolling “wraps” around and continues at the other end of the lists of menu.
Settings Setting Baud Rate You can set your phone’s baud rate from the Initial Setup screen. Scroll to the Baud Rate option and then choose the baud rate you want, or choose Auto to set your phone to automatically choose the appropriate baud rate. Setting TTY Mode NOTE: This feature may not be offered by your service provider. TTY Setup enables you to set your options for using your phone with a teletypewriter (TTY) device. By default, your phone is set to function with a TTY device in TTY mode.
To set your phone’s TTY mode from your TTY device, issue one of the following commands while on an active call: • • • “VCO please” — to select VCO mode. “HCO please” — to select HCO mode. “HCO off please” — to turn off HCO mode. IMPORTANT: When you are using HCO, the sound coming from your phone speaker may be uncomfortably loud. Use caution when putting the phone to your ear. (For information on setting your phone’s speaker volume, see “Alert Timeout” on page 148.
Settings Return to Home You can control the amount of time that the recent call screen displays after a call. You can set different timeouts (30 seconds, 1 min, 5 min, or 10 min) for phone calls and Nextel Direct calls: • After Phone — Set the time that the recent calls screen displays after a phone call. After Prvt/Group — Set the time that the recent calls screen displays after a private or group call. • To set the recent calls timeout.
Tkgrp (Talkgroup) Settings Tkgrp Settings enables you to set certain Talkgroup options. See “Group Call” on page 88 for more information. Service Status The Service Status screen shows the status of your phone’s services. This screen is for information only; no options can be set. Styles* *Optional feature. Please consult your service provider for availability of purchase. This feature enables you to save a group of settings for call and message notifications, screen display, and call answering features.
Settings Using the Styles feature, you can create styles, edit styles, view a style’s properties, delete styles, activate any style you have created, or turn off the active style. To access the Styles Menu: 1 From the Ready screen, press m. 2 Press R to scroll to Styles. 3 Press B under SELECT.
5 To change any style option: Press R to highlight the option. Press B under CHANGE or SELECT. Use the screens that appear to make your changes. 6 When all the style options have the settings you want, press A under DONE. Editing a Style To change the settings of a style: 1 From the Styles Menu screen, press R to scroll to the name of the style you want to edit. 2 Press m to access the Styles menu. 3 Press R to scroll to Edit and press B under SELECT.
Settings To activate a style: 1 From the Styles Menu screen, press R to scroll to the name of the style you want to activate. 2 Press B under SELECT. The style immediately becomes active on your phone. Turning Off a Style To turn off a style without activating another style: 1 From the Styles Menu screen, press R to scroll Off. 2 Press B under SELECT. Using the Styles Menu When you highlight a style on the Styles Menu, you can then access the Styles menu for additional Styles functions.
• • • • Phone — sets filtering options for phone calls. Prvt/Grp — sets filtering options for Private and Group calls. Alerts — sets filtering options for call alerts. Notifications — sets filtering options for messages. Setting Phone Call Filtering Call Filter enables you to set your phone responds to all calls, no calls, or only calls from some or all numbers in your Phonebook: • • • Off sets your phone notify you of all calls. All sets your phone to ignore all calls.
Shortcuts Setting Private and Group Call Filtering Setting Prvt/Grp to On sets your phone to ignore all Private and Group calls. Setting Prvt/Grp to Off sets your phone to respond to all Private and Group calls. Setting Alert Filtering Setting Alerts to On sets your phone to ignore all call alerts. Setting Alerts to Off sets your phone to respond to all call alerts.
3 A confirmation screen displays showing the name of the menu item to which you want to create a shortcut. To proceed with assigning the shortcut, press A under YES. 4 A screen displays showing the assigned shortcut number. If you want to change the shortcut number: Press B under CHANGE. Press A under DELETE to erase the assigned number. Enter the desired number on your keypad and press B under OK. 5 If you want to record a voice name for that shortcut: Press R to highlight the Voice field.
Shortcuts Or, 1 From the Ready screen, press m. 2 Press R to scroll to Shortcuts. 3 Press B under SELECT. 4 Press S to scroll to the shortcut you want to use. 5 Press B under GOTO. Or, if you have assigned the shortcut a voice name*: 1 From the Ready screen, press and hold t on the side of your phone until the Say Name Now screen appears. 2 Say the voice name assigned to the shortcut into your phone’s microphone. 3 Your phone will play the voice name back to you. *Optional feature.
To access the Shortcut menu: 1 From the Ready screen, press m. 2 Press R to scroll to Shortcuts. 3 Press B under SELECT. 4 Press m. www.motorola.
Accessories To order additional accessories, log on to our Web site at: www.motorola.com/ iden or contact your Motorola Authorized Retailer. This section includes information on the following accessories included with your phone: Wearable Carrying Solutions Page 159 Batteries Page 161 Travel Chargers Page 162 Data Accessories Page 164 Wearable Carrying Solutions Swivel Carry Clip The Swivel Carry Clip provides a convenient means by which to carry your i58sr phone with you.
Using the Swivel Carry Clip 1 Attach the Phone Clip to the phone. USER TIP:Start with the antenna side of the clip. 2 Slide the Belt Clip onto the Phone Clip until you hear it click. 3 Attach the Swivel Carry Clip (Phone Clip and Belt Clip) to your belt. 4 To release phone from belt clip, push the button on the top of the belt clip. Removing the Swivel Carry Clip 1 Hold the phone securely in your left hand.
Batteries 4 Squeeze the right hand thumb and index finger together until the clip snaps out of the retaining slot on the left side 5 Remove the clip. Batteries For best results, charge the batteries within the temperature range of 10oC to 40oC (50oF to 104oF). Prolonged charging is not recommended. For battery charging guidelines, see Table below. Charging Lithium Ion Batteries Table 1 provides the approximate time to fully charge a battery using a Motorola iDEN Approved Lithium Ion battery charger.
Battery Operating Instructions • Extreme temperatures will degrade battery performance. Do not store your battery where temperatures exceed 60°C (140°F) or fall below -20°C (4°F). Lithium Ion batteries have a self discharge rate and without use, will lose about 1% of its charge per day. The battery capacity will be degraded if stored for long periods while fully charged. If long term storage is required, store at half capacity.
Travel Chargers Accessory Connector Accessory Connector Using the Travel Charger 1 While holding the phone with its keypad facing up, insert the accessory connector (with the Motorola logo facing you) into the bottom of the phone until you hear a click. 2 If you have either the Mid-Rate Multi-Voltage Travel Charger or the Rapid Multi-Voltage Travel Charger, flip open the prongs, and plug the Travel Charger transformer into an AC wall outlet.
Data Accessories Universal Serial Bus (USB) Cable The Universal Serial Bus (USB) cable allows you to transfer data between your i58sr Phone and a laptop or desktop computer. This cable accommodates both circuit and packet data applications. The cable features a charging port which enables you to charge the phone while transferring data. To use the USB cable, your laptop or desktop computer must have a driver installed for this purpose.
Data Accessories RS232 Data Cable The RS232 Data Cable facilitates quick and easy data synchronization between your i58sr phone and a PC. This cable accommodates both circuit and packet data applications. The cable also features a charging port. Any applicable phone charger may be used to charge the phone simultaneously.
Dual Port Adapter Cable The Dual Port Adapter Cable enables in-vehicle communications and charging of the i58sr phone via the Hands-Free Car kit, while being simultaneously connected for data operations. CAR KIT DATA Using the Dual Port Adapter Cable 1 Insert the flat end of the Dual Port Adapter Cable cord into the bottom connector of the i58sr phone. Make sure the Motorola logo is facing upward.
Data Accessories PDA Converter Plugs The PDA (Pocket Digital Assistant) plug is a convenient way to connect your i58sr phone to many types of PDA devices, both PC and Windows CE compatible.
3 Connect other end of PDA converter to the mating connector of the PDA device. 4 If you are using the NTN8993 PDA adapter, connect the other end of the adapter to the PDA’s supplied data synchronization cradle and place the PDA into the cradle. www.motorola.
Other Important Information This section includes the following topics: Understanding Status Messages Page 169 Safety and General Information Page 172 Limited Warranty Information Page 188 Patent and Trademark Information Page 196 Understanding Status Messages The following table lists and describes the status messages. Status Messages Message Description Number Not in Service The number that you entered is not valid.
Status Messages Message Description System Busy Try Later The system is experiencing heavy traffic. Please try again later. Service Conflict This service cannot be enabled because an incompatible service has already been turned on. Please Try Again An error occurred. Please try again. Self Check Error A fault was detected with your phone. If this error recurs, note the error code and contact Customer Care. Self Check Fail An operational fault was detected with your phone.
Understanding Status Messages Status Messages Message Description Unable to Located Sats Could not find GPS satellites. For Update Visit: Directs you to update GPS satellite almanac data. Technical Error A problem occurred phone’s GPS circuitry. If this error occurs, contact Customer Care.
Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR INTEGRATED MULTI-SERVICE PORTABLE RADIO. RF Operational Characteristics Your radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network.
PORTABLE RADIO PRODUCT OPERATION AND EME EXPOSURE Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone. Two-way radio operation When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.
Approved Accessories For a list of approved Motorola accessories call 1-800-453-0920, visit our website at www.mot.com/iden, or look in the accessory section of this manual. ALL MODELS WITH FCC ID AZ489FT5815 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
Electro Magnetic Interference/Compatibility Electro Magnetic Interference/Compatibility NOTE: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so.
Use While Driving Check the laws and regulations on the use of radio products in the area where you drive. Always obey them. When using the radio product while driving, please: • • • Give full attention to driving and to the road. Use hands-free operation, if available. Pull off the road and park before making or answering a call if driving conditions so require. www.motorola.
Operational Warnings ! Operational Warnings WARNING For Vehicles with an Air Bag Do not place a portable radio product in the area over the air bag or in the air bag deployment area. Air bags inflate with great force. If a portable radio is placed in the air bag deployment area and the air bag inflates, the radio product may be propelled with great force and cause serious injury to occupants of the vehicle.
! Operational Cautions Caution Antennas Do not use any portable radio product that has a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn can result. Batteries All batteries can cause property damage and/or bodily injury, such as burns if a conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The conductive material may complete an electrical circuit (short circuit) and become quite hot.
Operational Cautions 5. Let the radio product, battery dry, and SIM card for 72 hours before reconnecting the battery and/or powering on the radio product. If the radio product does not work after following the steps listed above, contact your dealer for servicing information. Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product.
Accessory Safety Information IMPORTANT: SAVE THESE ACCESSORY SAFETY INSTRUCTIONS • Before using any battery or battery charger, read all the instructions for and cautionary markings on (1) the battery, (2) the battery charger, which may include a separate wall-mounted power supply or transformer, and (3) the radio product using the battery. • Do not expose any battery charger to water, rain, or snow as they are designed for indoor or in-vehicle use only.
US FDA Update on Mobile Phones • • • • • • Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician. Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
The U.S. Food and Drug Administration’s Center for Devices and Radiological Health Consumer Update on Mobile Phones FDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is known— and what remains unknown—about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This information may be used to respond to questions.
US FDA Update on Mobile Phones How much evidence is there that hand-held mobile phones might be harmful? Briefly, there is not enough evidence to know for sure, either way; however, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods. Animal experiments investigating the effects of RF exposures characteristic of mobile phones have yielded conflicting results.
3. Researchers conducted a large battery of laboratory tests to assess the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of abnormalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural changes in the genetic material of blood cells called lymphocytes. None of the tests showed any effect of the RF except for the micronucleus assay, which detects structural effects on the genetic material.
US FDA Update on Mobile Phones In summary, we do not have enough information at this point to assure the public that there are, or are not, any low incident health problems associated with use of mobile phones. FDA continues to work with all parties, including other federal agencies and industry, to assure that research is undertaken to provide the necessary answers to the outstanding questions about the safety of mobile phones.
• • design mobile phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and cooperate in providing mobile phone users with the best possible information on what is known about possible effects of mobile phone use on human health. At the same time, FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of mobile phone safety to ensure a coordinated effort at the federal level.
US FDA Update on Mobile Phones Where can I find additional information? For additional information, see the following websites: • • • • • Federal Communications Commission (FCC) RF Safety Program (select “Information on Human Exposure to RF Fields from Cellular and PCS Radio Transmitters”): http://www.fcc.gov/oet/rfsafety . World Health Organization (WHO) International Commission on NonIonizing Radiation Protection (select Qs & As): http://www.who.
Limited Warranty Motorola Communication Products NOTE: This Warranty applies within the fifty (50) united states and the District of Columbia I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: MOTOROLA, INC.
Limited Warranty Motorola Communication Products to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.
IV. HOW TO GET WARRANTY SERVICE: You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location. Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g.
Limited Warranty Motorola Communication Products VI. PATENT AND SOFTWARE PROVISIONS: MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following: a.
Limited Warranty Motorola Communication Products (International) NOTE: This Warranty applies in Singapore and the Philippines. I.
Limited Warranty Motorola Communication Products (International) to this warranty unless made in writing and signed by an officer of MOTOROLA. Unless made in a separate agreement between MOTOROLA and the original end user purchaser, MOTOROLA does not warrant the installation, maintenance or service of the Product.
normal and customary manner. b. Defects or damage from misuse, accident, water, or neglect. c. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. d. Breakage or damage to antennas unless caused directly by defects in material workmanship. e. A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment). f.
Limited Warranty Motorola Communication Products (International) likely to become, the subject of a claim of infringement of a patent, that such purchaser will permit MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return.
Patent and Trademark Information MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2002 Motorola, Inc. All rights reserved. Manufactured under one or more of the U.S. patents listed in the User’s Guide. Microsoft and, Microsoft WEB Explorer, are registered trademarks of Microsoft Corporation. Netscape Navigator is a registered trademark of Netscape Communications Corporation.
Patent and Trademark Information 197
www.motorola.
Index A Accessories 159 batteries 161 Data cable 79, 165, 166 Dual Port Adapter Cable 166 Swivel Carry Clip 159 Travel Charger 162 Accessory safety information 180 Adapter cable 166 Additional Health and Safety 182 Alpha mode, text entry 26 Auto Redial 144 B Backlight timer 144, 145 Battery 161 attaching 7 charge strength 9 charging 8 detaching 8 operating 162 Baud rate 147 C Call Alert Queue 86 Call alerts 84 from Phonebook 84 receiving 85 Call Filtering 153 Call Forwarding 67 turning off 69 turning on 6
E J email 79 sending and receiving 78 Entering text, see Text entry F Faxes sending and receiving 79 Getting started 5 GPS Enabled 93 almanac data 99 best results 98 making emergency calls 95 map software 101 privacy options 99, 129 security 100 viewing location 96 GPS, see GPS Enabled Group calls 88 Icons context sensitive 32 Datebook 106 main menu 36 Phonebook 40 status 32 icons call information 34 In Call Setup 138 Initial Setup 142 Initial SIM PIN number 13 International calls 52, 57 IP Address 24
text and numeric 76 voice mail 74 Messages, Net Alert receiving 78 Messages, text and numeric receiving 77 viewing 77 Missed Calls 62 Modem, phone as 79 Motorola 2 Mute 62 My Information 24 N Net Alert 78 Notifications 138 setting 136 Numeric mode, text entry 29 P Packet data 79 Password security code 139 SIM PIN 139 unlock code 139 Patent information 196 Pause digit entry 51 Personalize 140 Phone modem 79 off 10 on 9 status 24 Phone calls 53 ending 58 from Phonebook 54 from Recent Calls list 55 internati
Recent Calls list storing numbers from 49 Ring styles 137 Ring/Vibe 134 S Safety accessory 180 electromagnetic interference 175 medical devices 175 radio frequency 172 Scrolling 146 Security 12, 138 Settings 133 In Call Setup 138 Initial Setup 142 Personalize 140 Phone Setup 137 Ring/Vibe 134 Security 138 VoiceVolume 148, 149 Shortcuts 155 creating 155 using 156 SIM card 12, 39 inserting and removing 18 unblocking 15 SIM PIN 12, 139 changing 14 default 13 disabling 16 enabling 16 entering 13 Speed Dial num
U Unblocking SIM PIN 15 V Viewing Datebook 106 Voice Activated dialing 83 also see Voice names Voice Mail 74 logging in 75 receiving messages 74 transferring calls to 74 Voice names 41 creating 47, 156 making calls 83 Phonebook 47 shortcuts 156, 157 Voice Record 61, 121 adding 123 deleting 124 labeling 123 locking 124 memory 125 playing 122 recording 122 W Warranty 192 Word mode, text entry 27 203
www.motorola.
