- Nextel Digital Multi-Service Data-Capable Phone User's Guide

119
Settings
To change the TTY baud rate:
Alert Timeout
Alert timeout controls the amount of time the Call Alert tone sounds. The
display will continue to show the alert information even though the Call Alert
tone has stopped.
You can set your phone’s alert timeout rules from the Settings/Initial Setup
screen. Scroll to the Alert Timeout option and then choose the desired interval.
(No Alert Tone, 1 minute, 5 Minutes, 15 Minutes, 30 Minutes, 1 Hour, or
Continuous).
Return to Home
You can control the amount of time that the recent call screen displays after a
call. You can set different timeouts (Immediately, 30 seconds, 1 min, 5 min, 10
min or 24 hours) for phone calls and private calls:
• After Phone — Set the time that the recent calls screen displays after a
phone call.
• After Prvt/Group — Set the time that the recent calls screen displays after
a private or group call.
To set the recent calls timeout.:
1 From the Initial Setup screen, press R to scroll to TTY Baud.
2 Press C under CHANGE.
3 Press S to scroll to the baud rate for your location.
4 Press C under SELECT.
1 From the Initial Setup screen, press R to scroll to Return to Home.
2 Press C under CHANGE.
3 Press S to scroll to the desired display option.
4 Press C under SELECT.