Motorola iDEN Digital Multi-service Data-capable Phone i315 Phone User’s Guide @NNTN5504A@ NNTN5504A
IMPORTANT NOTICE: PLEASE READ PRIOR TO USING YOUR PHONE The SIM card provided in this kit is intended for use with the phone provided in this package. Loss of certain features will result when using a SIM card from one of the following models: i30sx, i35s, i50sx, i55sr, i58sr, i60c, i80s, i85s, i88s, i90c, i95cl series, and the i2000 series. For more information on SIM card compatibility, go to www.motorola.com/iden/support.
Contents Getting Started........................................... 1 Locating Your SIM Card ....................................3 Activating Service..............................................6 Powering On and Off.........................................6 Enabling Over-the-Air Security..........................6 Phone Programming .........................................7 Finding Your Phone Number.............................7 Phone Basics ....................................................
Deleting Entries ...............................................35 Checking Capacity ..........................................36 Creating Pauses and Waits.............................36 International Numbers .....................................36 Accessing Contacts with GSM Phones ...........37 Memo .........................................................49 Ring Tones ................................................50 Forwarding All Calls ........................................
Voice Mail Messages ............................... 59 Receiving a Message ......................................59 Accessing Voice Mail from the Message Center ...................................59 Sending Unanswered Calls to Voice Mail .......59 Playing Voice Records ....................................75 Labeling Voice Records ..................................76 Deleting Voice Records...................................76 Locking Voice Records ...................................76 Managing Memory ......
Operational Warnings......................................89 Operational Cautions.......................................90 Accessory Safety Information..........................91 MOTOROLA LIMITED WARRANTY ........ 93 Limited Warranty Motorola Communication Products (International) ....................................... 97 Patent and Trademark Information ...... 101 Index ....................................................... 102 Driving Safety Tips ................................
DECLARATION OF CONFORMITY Per FCC CFR 47 Part 2 Section 2.1077(a) Responsible Party Name: Motorola, Inc. Address: 8000 West Sunrise Boulevard Plantation, FL 33322 USA Phone Number: 1 (800) 453-0920 Hereby declares that the product: Product Name: i315 Model Number: H69XAH6RR1AN Conforms to the following regulations: FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a) Class B Digital Device As a personal computer peripheral, this device complies with Part 15 of the FCC Rules.
Getting Started antenna volume controls audio jack p Power button. Navigation key — press the arrows to scroll through menus and lists. Push-To-Talk (PTT) button speaker (in back) m Menu key — accesses context-sensitive menus. A Option key — selects the option appearing above it on the display. s Send key — places phone calls. e End key — ends phone calls; returns to idle screen; in browser mode, returns to Net main menu.
Getting Started To start using your i315 phone: • • • • Make sure your SIM card is in place. Charge the battery. Activate your service. Enable over-the-air security. Note: If the release button does not slide forward to release the battery door, rotate the circular piece in the center of the release button to unlock it. Removing the Battery Door 1 Make sure the phone is powered off. 2 Slide the release button forward until it releases the battery door.
Locating Your SIM Card Locating Your SIM Card Battery Your SIM (Subscriber Identity Module) card is a small piece of plastic located in the SIM card holder in the back of your phone, underneath the battery. Inserting the Battery 1 Remove the battery door. 2 Insert the top of the battery into the battery area. Press the bottom of the battery to secure it.
Getting Started 4 If you want to ensure the battery door does not accidentally come off, rotate the circular piece in the center of the release button to lock it. 3 Plug the other end of the charger into the accessory connector. Charging the Battery Your phone comes with a standard travel charger. 1 Plug the charger into an electrical outlet. 2 Open the connector cover. connector cover 4 Device Attached appears on the display.
Locating Your SIM Card Charging Times See your battery and charger to determine the appropriate charging time. Battery 2 Remove the battery by pushing the battery toward the antenna and lifting it out. Charger Rapid Mid-Rate High 2 hours Performance 4 hours Extra Capacity* 2.5 hours 6 hours Maximum Capacity* 3.5 hours 7.5 hours For best results, charge the batteries within the temperature range of 50°F to 104°F (10°C to 40°C). Prolonged charging is not recommended.
Getting Started Activating Service The first time you power on your phone, you must be in your local calling area. This activates your service. As your phone connects to the network, you will see a connecting message. When the idle screen appears, the phone is ready to use. s 1 d Powering On and Off To power your phone on: Press p. To power your phone off: Press and hold p.
Phone Programming 2 Press A under Ok. 3 You are prompted to enable security. Press A under Yes. A series of screens appears. If you subscribe to your service provider’s plan, your home page appears. 4 Press e to return to the idle screen. Phone Programming Within 24 hours of enabling security, you will receive a Net alert containing your Private ID and Talkgroup lists for Private calls.
Getting Started • Ckt — Your circuit data number is the number you use if you want to use your phone to transfer circuit data. See “Using Your Phone as a Modem” on page 46. You receive this number from your service provider. Note: The context-sensitive menu under My Info contains information that may be used by your service provider if there is a problem with your phone. The screen shown above is the idle screen. The text that appears on your idle screen depends on your service provider.
Phone Basics 2 Press A under Select to see the Settings screen. 3 Scroll to Security. 4 Press A under Select to see the Security screen. e Messages Access messages. See page 57. f Call Forward Set call forwarding options. See page 38. g Memo Store a number to access later. See page 49. Many features provide context-sensitive menus that let you access related features and actions. This S icon appears any time a context-sensitive menu is available. Press m to access the menu.
Getting Started m 12 Active Phone Line — 1 indicates phone line 1 is ready to make calls; 2 indicates phone line 2 is ready to make calls. Status Icons m Status icons appear in the two rows at the top of the display. Some appear at all times. Others appear only when your phone is engaged in certain activities or when you have activated certain features. MOTOtalk — Your phone is set to MOTOtalk mode. GHI J KL Call Forward — Your phone is set to forward calls. See “Call Forwarding” on page 38.
SIM Card Security SIM Card Security Your SIM card protects your personal information. The SIM card stores all your Contacts information. Since this information is stored on your SIM card, not in your phone, you can remove the information by removing your SIM card. Note: Except for making emergency calls, your phone will not function without the SIM card. To prevent unauthorized use of your phone, your SIM card is protected by a PIN that you enter each time the phone is powered on.
Getting Started Turning the PIN Requirement On and Off When the SIM PIN requirement is on, you are prompted to enter your PIN each time you turn on your phone. Note: If a SIM PIN is required, your phone will not function until the SIM PIN is entered, except for making emergency calls. When the PIN requirement is off, your phone can be used without entering a PIN. Important: When the SIM PIN requirement is off, the personal data on your SIM card is not protected.
SIM Card Security Inserting and Removing Your SIM Card Important: Do not touch the gold-colored areas of your SIM card. Switching SIM Cards Moving your SIM card from one phone to another moves all your Contacts information, but erases other information.
Getting Started Locking the Keypad Removing Your SIM Card Important: To avoid loss or damage, do not remove your SIM card from your phone unless absolutely necessary. 1 With your phone powered off, remove the battery door and battery. 2 While holding the tab down, slide your SIM card out of the SIM card holder. SIM card holder Locking the phone’s keypad prevents its buttons from being pressed.
Games Games Accessories Your phone comes with pre-installed games. To order accessories, log on to our Web site at www.motorola.com/store/iden or contact your Motorola Authorized Retailer. Note: Depending on your service provider, you may or may not have all the games listed below in your phone. To access Games: 1 From the main menu, select Games. 2 Scroll to the desired game. 3 Press A under Select.
Making Calls Receiving Calls Your i315 phone makes two types of calls: digital cellular phone calls and Private calls. With Private calls, you use your phone as a long-range, digital walkie-talkie. Phone Calls Phone Calls 1 Enter the number you want to call. 2 Press s to place the call. 3 Press e to end the call. Private Calls 1 Enter the Private ID you want to call. 2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound.
Call Icons 2 Press and hold the PTT button on the side of your phone. Begin talking after your phone emits a chirping sound. 3 Release the PTT button to listen. Call Icons When you make a call, call icons appear in the text area of the phone’s display. X Placing a phone call.
Making Calls To select a number from the recent calls list as the number you want to call: 1 From the idle screen, scroll down. -orFrom the main menu, select Recent Calls. 2 Scroll to the name or number you want to call. From Contacts If you have numbers stored in Contacts, you can use these numbers to make calls. For information on entering numbers into Contacts, see “Creating Entries” on page 33. Calling from the Contacts List 1 From the main menu, select Contacts.
Using Speakerphone Using a Voice Name Note: This is an optional feature. Contact your service provider about its availability for purchase. If you have created a voice name in Contacts for the number you want to call, you can say the voice name into your phone to enter the number. See page 32 for more information about voice names. To use a voice name: 1 Press m. 2 Select Voice Recog. 3 Speaking into the microphone, say the voice name assigned to the number you want to call.
Making Calls To turn speakerphone on or off: Press under A under Spkr. -orPress t. Using Mute Muting calls lets you listen to incoming sound without transmitting sound. Mute is available whenever you are on an active call. To turn mute on: Press A under Mute. While mute is on, Unmute appears as a display option. To turn mute off: Press A under Unmute. Making Emergency Phone Calls Your phone supports emergency calling.
MOTOtalkTM MOTOtalk allows direct two-way phone-to-phone communications between two or more phones equipped for MOTOtalk. You can make and receive MOTOtalk calls even when network service is not available. You can talk to anyone on your code and channel within your range. MOTOtalk allows you to: • Use code or private mode operation • Use up to 10 channels • Communicate with standalone MOTOtalk radios Note: MOTOtalk is not compatible with older Family Radio Services products.
MOTOtalkTM Exiting MOTOtalk To set your phone to network mode when MOTOtalk is active: 1 From the MOTOtalk idle screen, press m. 2 Scroll to MT Options and press A under Select. 3 Select Exit MOTOtalk. Switching to Network Please Wait displays. After a few seconds, the network idle screen appears. Talk Range Phones used in MOTOtalk mode should be a minimum of 6 feet apart to maximize performance and improve transmission range. Channels and Codes Your phone has 10 channels and 15 codes.
Channels and Codes Making and Receiving Code Calls in MOTOtalk To make a code call in MOTOtalk: 1 Press and hold the PTT button. MT Transmit appears on the first line of display. Begin speaking after your phone emits the MOTOtalk tone. 2 Release the PTT button to listen. The tone emitted from your phone when using MOTOtalk is 4 beeps and sounds different from the standard tone heard with on-network Private and group calls. If you receive an error message: • There may be no parties on your channel or code.
MOTOtalkTM Private MOTOtalk Calls You can have a private conversation with another person using MOTOtalk. When on a private MOTOtalk call, no other parties can hear your conversation. In order to make a private MOTOtalk Call, you must use the valid 10-digit Personal Telephone Number (PTN) of the person you are calling. The person you are calling must be in MOTOtalk and set to the same channel to receive your call.
Making Emergency Calls in MOTOtalk Ending a private MOTOtalk Call To access Setup Options in MOTOtalk: A private MOTOtalk call will end if there is no communication for 6 seconds. 1 From the main menu, select MT Options. 2 Select Setup. Note: A private MOTOtalk call may be interrupted during the 6 second idle time by another code call or private call. The display will return to the MOTOtalk idle screen.
MOTOtalkTM To turn off Direct Launch: 1 From the Setup screen, scroll to Direct Launch and press A under Change. 2 Select Off. Your phone now displays MT Options when you select MOTOtalk from the main menu. Using State Tone To set your phone to notify you with a tone that you are in MOTOtalk: 1 From the Setup screen, scroll to State Tone and press A under Change. 2 Select the time frame during which you want to be notified that you are in MOTOtalk.
Call Alerts Receiving Call Alerts Sending a call alert lets the recipient know you want to talk to him or her on a Private call. When you receive a call alert, you must answer, queue, or clear it. You cannot receive phone calls or Private calls until you do. When you send a call alert, the recipient’s phone emits a series of beeps, or vibrates, and displays your name or Private ID.
Call Alerts Viewing Date and Time Deleting Call Alerts To view the date and time a call alert was received: To delete a call alert from the queue: 1 2 3 4 1 From the call alert queue, scroll to the call alert you want to delete. 2 Press m. 3 Select Delete. 4 Press A under Yes to confirm. From the main menu, select Call Alert. Scroll to the call alert you want information on. Press m. Select View.
Recent Calls The recent calls list stores the numbers of the 20 most recent calls you have made and received. To view the recent calls list: 1 From the idle screen, press the down arrow on the navigation key. -orFrom the main menu, select Recent Calls. 2 Scroll through the list. If the number of a recent call is stored in Contacts, the name associated with the number appears on the recent calls list. An icon appears beside the name or number indicating the Contacts type of the number used in the call.
Recent Calls 3 To store the number as a new entry, select [New Contact]. -orTo store the number to an existing entry, select the entry. 4 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign to the number. For information on Contacts types, see page 31. 5 If you want to add more information to the entry, follow the applicable instructions in “Creating Entries” on page 33. 6 Press A under Done.
Contacts • A Contacts type — Each number or address stored must be assigned a Contacts type: Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses. A Mobile phone number Private Private ID Information stored in Contacts is saved on your SIM card. B C Work1 phone number A Contacts entry contains: D Work2 phone number • A name — A name is required if you are storing more than one number or address to the entry; otherwise, it is optional.
Contacts • A Speed Dial number — When you store a phone number, it is assigned a Speed Dial number. You can accept the default Speed Dial number or change it. • A voice name — If you create a voice name for a number, you can then dial that number by saying the voice name into your phone. This icon appears P to the left of the Contacts type icon if a voice name is assigned. Note: This is an optional feature. Contact your service provider about its availability for purchase.
Creating Entries 3 With Prvt/Grp highlighted, press A under Select. To set Contacts to show all entries: 1 From the Contacts list, press m. 2 Select Filter. 3 With Show All highlighted, press A under Select. Creating Entries A number or address and a Contacts type are required for all Contacts entries. Other information is optional. You may enter the information in any order by scrolling through the entry details.
Contacts Enter the number or address. For phone numbers, use the 10-digit format. For email addresses, see “Entering Text” on page 54. Tip: Press A under Browse to select a number or address from Contacts, the recent calls list, or Memo. When you are finished, press A under Ok. 6 If you want to assign more options to the number, press A under Change with the [Options] field highlighted. See “Assigning Options”.
Editing Entries To store numbers to Contacts from the idle screen: 1 Use the keypad to enter the number you want to store. 2 Press m. 3 Select Store Number. 4 To store the number as a new entry, select [New Contact]. -orTo store the number to an existing entry, select the entry. 5 With the Contacts type field highlighted, scroll left or right to display the Contacts type you want to assign to the number.
Contacts Checking Capacity To see how many numbers are stored in Contacts: 1 From the Contacts list, press m. 2 Select Capacity. Creating Pauses and Waits When storing a number, you can program your phone to pause or wait between digits while dialing. A pause makes your phone pause for 3 seconds before dialing further. A wait makes your phone wait for your response before dialing further.
Accessing Contacts with GSM Phones For information about making international calls, see “Making International Calls” on page 43. Accessing Contacts with GSM Phones If you plan to use the information stored in Contacts with an i2000, i2000plus, or any other GSM phone, download iDEN Phonebook Manager. Go to idenphones.motorola.com/iden/support for more information. You can use iDEN Phonebook Manager to make the Contacts information saved to your i315 phone’s SIM card accessible in this type of phone.
Call Forwarding Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently. Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display: L Phone line 2 is active; calls to phone lines 1 and 2 are being forwarded.
Turning Off Call Forwarding Tip: In some fields, you can select an option by scrolling left or right instead of pressing A under Change. Turning Off Call Forwarding If you don’t want all your calls forwarded, turn the feature off: 1 2 3 4 5 6 7 From the main menu, select Call Forward. Press A under Change. Select All Calls. Scroll to To. Press A under Change. Scroll to Off. Press A under Select. All your calls are now sent to your phone.
Call Forwarding Press A under Search. Select Contacts, Recent Calls, or Memo. Select the number you want to enter. 8 Press A under Ok. 9 Repeat step 4 through step 8 for If No Answer and If Unreachable. When you are finished, press A under Back. Viewing Call Forwarding Settings 1 2 3 4 5 6 From the main menu, select Call Forward. Press A under Change. Select All Calls. Scroll to To. Press m. Select Retrieve Status.
Advanced Calling Features Call Waiting Call Waiting lets you receive a second call while on an active call. Call Waiting is always available, unless you turn it off for a specific call. Switching Between Calls When you accept a second call, the display shows the name or number of each call, with an icon indicating which call is active: Y Phone call is active. Z Phone call is on hold.
Advanced Calling Features To turn off Call Waiting for the next call you make or receive: To end the second call and make the call on hold active again: 1 From the main menu, select Settings > Phone Calls > Call Waiting. 2 Press A under Change. 3 Scroll to Off. 4 Press A under Select. To make the call on hold active and put the active call on hold: Call Waiting is turned back on when you end the call. Call Hold Press e. Press A under Switch.
Creating Pauses and Waits While Dialing 7 Press A under Select. Both calls are now active and appear on the display. Making International Calls Note: This feature may not be offered by your service provider. Creating Pauses and Waits While Dialing Plus Dialing lets you place an international call to most countries without entering the local international access code. You can enter a pause or wait while dialing a number.
Advanced Calling Features To set your phone to call a Private ID you choose: Joining a Talkgroup 1 From the main menu, select Settings > 2-Way Radio > One Touch PTT > Assigned Number. 2 To enter the Private ID you want your phone to call every time you press the PTT button: Before you can make or receive group calls, a Talkgroup must be established. After the Talkgroup is established, you must join the Talkgroup. Enter the number using your keypad. -orPress A under Search.
Call Timers 2 Proceed as if making a Private call. Turning off Group Calls Receiving Group Calls To control whether you hear group calls to your Talkgroup: To answer a group call: Proceed as if answering a Private call. Only one person at a time may speak on a group call. The Private ID or name of the person who is speaking will appear on the display below the Talkgroup number. Making Group Calls 1 Press #. Then enter the Talkgroup number using the keypad.
Advanced Calling Features • Prvt/Grp Reset — keeps a running total of all of your Private and group call minutes, until you reset it. • Prvt/Grp Lifetime — displays the total minutes of all your Private and group calls. • Circuit Reset — keeps a running total of all of your circuit data use, until you reset it. • Circuit Lifetime — displays the total minutes of all of your circuit data use. • Kbytes Reset — keeps a running total of the number of Kilobytes sent and received by your phone, until you reset it.
Using Your Phone as a Modem 2 With the phone’s display facing up, insert a data cable’s connector into the accessory connector, until you hear a click. To use your phone to make phone calls using a teletypewriter (TTY) device: 1 Connect one end of a 2.5mm cable into the audio jack on your phone. Connect the other end of the cable to your TTY device. 2 Make sure that your phone’s TTY feature is on and select the TTY mode you want to use. 3 Use your phone to enter phone numbers and make calls.
Advanced Calling Features Choosing a Mode Your phone supports these TTY modes: • TTY — You type and read text on your TTY device. • VCO (Voice-Carry-Over) — You speak into your phone and read text replies on your TTY device. • HCO (Hearing-Carry-Over) — You type text on your TTY device and listen to voice replies on your phone speaker. To change mode while not in a call: 1 From the main menu, select Settings > Phone Calls > TTY > Type. 2 Press A under Change. 3 Scroll to the TTY mode you want.
Memo Memo lets you store a number, make a call to that number, and save it to Contacts. To create a memo: 1 From the main menu, select Memo. 2 Enter the number using your keypad. 3 Press A under Store. To view the memo later: 1 From the main menu, select Memo. To delete the memo: 1 From the main menu, select Memo. 2 Press and hold A under Delete. 3 Press A under Store. To store the memo number to Contacts: 1 2 3 4 From the main menu, select Memo. Press m. Press A under Select.
Ring Tones Setting Your Phone to Vibrate To set the ring tone your phone makes when you receive phone calls, message notifications, or call alerts: If your phone includes a vibrate feature, you can set your phone to vibrate when you receive phone calls, Private calls and group calls, messages notifications, or call alerts. 1 From the main menu, select Ring Tones. 2 Make sure VibeAll or SilentAll is set to Off. 3 Scroll through the list of ring tones and select the one you want to assign.
Ring and Vibrate Never Ring 1 From the main menu, select Ring Tones > SilentAll. 2 Scroll left or right to set SilentAll to On. Always Vibrate Instead of Ringing If your phone includes a vibrate feature: 1 From the main menu, select Ring Tones > VibeAll. 2 Scroll left or right to set VibeAll to On. Tip: Pressing the volume controls to turn down the volume as far as possible sets VibeAll to On.
Ring Tones Assigning Ring Tones to Contacts You can set the ring tone your phone makes when you receive phone calls or call alerts from someone you have stored in Contacts. 1 From the main menu, select Ring Tones. 2 Make sure VibeAll or SilentAll is set to Off. 3 Scroll through the list of ring tones to the one you want to assign. Highlighting a ring tone lets you hear it. 4 Press A under Assign. 5 Select A Contact. 6 Scroll to the Contacts entry you want to assign the ring tone to. 7 Press A under Select.
Deleting Custom Ring Tones Note: Ring tones are stored in your phone using the same memory space used to store voice records. Deleting voice records frees memory space for ring tones. Deleting Custom Ring Tones To delete a custom ring tone: 1 2 3 4 5 6 From the main menu, select Ring Tones. Make sure VibeAll or SilentAll is set to Off. Scroll to the ring tone you want to delete. Press m. Select Delete. Press A under Yes to confirm.
Entering Text You can enter text into your phone using the traditional method of pressing a key several times for each character, or by pressing a key once for each letter while words likely to be the one you want are chosen from a database. You can also enter symbols and numbers into a text field. In screens that require you to enter text, you see the following icons near the top right corner. These icons tell you which text input mode you are using: l Alpha — Press a key several times for each character.
Special Function Keys 2 Type a word by pressing one key for each letter. For example, to type “test” press 8 3 7 8. The displayed word may change as you type it. Do not try to correct the word as you go. Type to the end of the word before editing. 3 If the word that appears is not the desired word, press 0 to change the word on the display to the next most likely word in the database. Repeat until the desired word appears.
Entering Text These icons appear in the top row of your display: Using Symbols Mode m Shift is on. 1 Select Symbols as your text input mode. n Caps lock is on. When neither of these icons appear, letters typed are lowercase. Note: Your phone automatically makes the first letter of a sentence uppercase. Punctuation Press 1 or 0 to insert punctuation. Continue to press the key to view the list of symbols available through that key. Pause to select the symbol you want.
Messages You can receive the following types of messages on your phone: If you dismiss the notification, the message is not deleted. It can be accessed through the message center. If you are not on a phone call when you receive a message, your phone sounds a notification tone every 30 seconds until you access the message, dismiss the notification, or the alert time-out expires.
Messages Message Center The message center manages your messages. All your messages are stored in the message center. The message center shows how many messages you have of each type. To access your messages through the message center: 1 Press A under Mesgs. -orFrom the main menu, select Messages. 2 Scroll to the type of message you want to access. 3 Press A under the display option on the left.
Voice Mail Messages Note: To receive voice mail messages, you must first set up a voice mail account with your service provider. Receiving a Message When you receive a voice mail message, New Voice Mail Message appears on the display. To call your service provider’s voice mail system and listen to the message: Sending Unanswered Calls to Voice Mail To send a phone call to voice mail instead of answering it: Press e. -orPress A under No.
MOSMS Messages Note: This feature may not be offered by your service provider. If your service provider offers MOSMS, your phone sends SMS messages using MOSMS and receives SMS messages from other phones that are using MOSMS. Setting Up Before you begin using MOSMS, you may need to set up your signature, service center number, and expiration information: 1 2 3 4 5 From the main menu, select Messages. Scroll to Text Inbox. Press m. Select Text Msg Setup.
Reading from the Message Center To delete the message, scroll to the end of the message and press A under Delete. To dismiss the message notification: Press A under Exit. This icon w appears on the display, reminding you that you have a new message. If your phone is powered off when you receive a text message, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area.
MOSMS Messages under Select. For more information on quick notes, see “Using Quick Notes” on page 63. To delete the message without sending it: Press m. Scroll to Delete. Press A under Select. If you want to add your signature: Press m. Select Add Signature. Tip: In some fields, you can select an option by scrolling left or right instead of pressing A under Change. When you are finished, press A under Ok. 5 If you want to send the message, press A under Yes.
Creating and Sending Messages 3 Select Compose SMS. The message is automatically addressed to the phone number you chose. 4 Follow step 4 through step 8 of “Creating and Sending Messages” on page 61. Using Quick Notes Quick notes are short, pre-written text messages that you can create, edit, and send. You can store up to 20 quick notes. A quick note may be up to 30 characters long. To create a quick note: 1 From the main menu, select Messages > Quick Notes > [New Quick Note]. 2 Press A under Create.
MOSMS Messages These icons appear next to messages in the outbox: Deleting Sent Messages 5 Sent and confirmed. 9 Send attempted. 0 Forwarded. 4 Received by addressee. 6 Not received by addressee. 1 From the main menu, select Messages > Text Outbox. 2 Scroll to the message you want to delete. 3 Press m. 4 Select Delete. 5 Press A under Yes to confirm. 8 Send failed. 7 Re-sent. R Locked.
Managing Memory Scroll to Unlock to unlock the message. 3 Select Memory Meter. 5 Press A under Select. Managing Memory Your text inbox, outbox, and drafts folder have a set amount of memory available for storing messages. The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some. The outbox and drafts folder share memory space. Together they can hold 30 messages.
GPS Enabled Your phone’s GPS Enabled feature uses information from Global Positioning System (GPS) satellites orbiting the Earth to determine the approximate geographical location of your phone, expressed as latitude and longitude. The availability and accuracy of this location information (and the amount of time that it takes to calculate it) will vary depending on the environment in which you are using the GPS feature.
Making an Emergency Call • When your GPS antenna is covered (for example, by your hand or other object) or facing the ground • In temperature extremes outside the operating limits of your phone Walking or driving very slowly may also substantially reduce GPS performance. Even where location information can be calculated in such situations, it may take much longer to do so, and your location estimate may not be as accurate.
GPS Enabled GPS satellite signals and network assist data, it may take 30 seconds or more to determine the approximate location. This time will increase where there is reduced access to satellite signals. When your approximate location is determined, it is made available to the appropriate emergency response center. In some cases, your local 911 emergency response center may not be equipped to receive GPS location information.
Enhancing GPS Performance • The number of satellites used to calculate the location. In general, more satellites make for better accuracy. To calculate your location again: Press A under Rfrsh. It may take your phone several minutes to complete the process of determining your location. During this time, a message usually appears on your phone’s display saying your phone is scanning for satellites. For tips on getting the best location calculation, see “Enhancing GPS Performance”.
GPS Enabled • Stay in the open. The GPS feature works best where there is nothing between your phone and a large amount of open sky. If possible, go outside, away from tall buildings and foliage. While performance in a building is improved by moving closer to windows, glass with certain sun shielding films may block satellite signals. • Hold your phone to enhance reception.
Updating Satellite Almanac Data Updating Satellite Almanac Data Another way to keep the GPS feature of your phone working well is to keep your satellite almanac data up to date. The United States government maintains an almanac of data about where GPS satellites are as they orbit the Earth. This information is available to your phone. Keeping your satellite almanac up to date helps your phone determine your location more quickly.
GPS Enabled To set your GPS privacy options: 5 Press A under Ok. 1 From the main menu, select GPS > Privacy. 2 If your GPS PIN security feature is enabled, enter your GPS PIN. (See “Setting the GPS PIN Security Feature” for more information.) 3 Scroll to the privacy setting you want. 4 Press A under Select.
Using GPS with Map Software location to the device running the map software, which displays your location on a map. Your phone provides an updated location every second and the map software displays your changing location on its map. See “Enhancing GPS Performance” on page 69 for more details on obtaining good location information. Getting Started To connect your phone to your laptop or other device: 1 Open the connector cover.
GPS Enabled To set your phone to send location information to your laptop or other device: 1 From the main menu, select GPS > Interface. 2 With NMEA OUT highlighted, press A under Change. 3 Scroll to On. 4 Press A under Select. Your phone is now sending location data to your laptop or other device. To stop your phone from sending location data to your laptop or other device: 3 Insert the data plug into the COM port of your laptop or other device.
Voice Records Note: This is an optional feature. Contact your service provider about its availability for purchase. A voice record is a recording you make with your phone and can play back. You can record notes to yourself or phone calls. Your phone can store up to 20 voice records. Creating Voice Records To record a note to yourself: 1 From the main menu, select VoiceRecord. 2 With [New VoiceRec] highlighted, press A under Record. 3 Say the message you want to record into the microphone.
Voice Records Labeling Voice Records 5 Press A under Yes to confirm. When you create a voice record, it is labeled with the time and date it was recorded. You can then rename it with a custom label. Locking Voice Records 1 2 3 4 From the main menu, select VoiceRecord. Scroll to the voice record you want to label. Press m. Select Label. Enter the label you want to assign. See “Entering Text” on page 54. 5 Press A under Ok.
Managing Memory To free more memory by deleting all unlocked voice records: 1 From the voice records memory screen, press A under Delete. 2 Press A under Yes to confirm. Note: Voice records are stored in your phone using the same memory space used to store messages, Java application data, and ring tones. Deleting some of these other items frees memory for voice records.
Customizing Your Phone volume of the phone’s ring when you get a call on that line. Setting the Volume See “Volume Features” on page 80. To set the volume of the sound coming from the phone’s earpiece or speaker: Setting Your Phone to Not Ring 1 From the main menu, select Settings > Volume. 2 Scroll to Earpiece to set the earpiece volume. -orScroll to Speaker to set the speaker volume. 3 Press A under Change. 4 To select the volume: Scroll left or right. -orPress the volume controls.
Seeing the Display Better If your phone does not include a vibrate feature, you can still set your phone to make no sound. Scroll to Silent in step 3. Seeing the Display Better To set the contrast of the display: 1 From the main menu, select Settings > Display/Info > Contrast. 2 Press A under Change. 3 Scroll left or right to set the contrast. 4 Press A under Ok. Using Settings Settings contains many submenus that let you customize your phone.
Customizing Your Phone • TTY — lets you use your phone with a TTY device. See “To use these services, you must install the iDEN Wireless Data Services software (available separately). Making TTY Calls” on page 47. • Notifications — See “Message Notifications” on page 57. 2-Way Radio Features The 2-Way Radio menu controls how your phone handles Private calls and group calls: • Tkgrp Silent — controls whether you hear group calls to your Talkgroup. See “Receiving GroupTM Calls” on page 45.
Using Settings • SIM PIN — enables and disables your phone’s SIM PIN security feature. See “Turning the PIN Requirement On and Off” on page 12. • GPS PIN — enables and disables your phone’s GPS PIN security feature. See “Setting the GPS PIN Security Feature” on page 72. • Change Passwords — changes your phone unlock code, security code, SIM PIN, and GPS PIN. Advanced Features The Advanced menu contains advanced and rarely used Settings features.
Using a Headset Using a Remote PTT Button If you use a headset or similar device with your phone, you can set your phone to send incoming sound to the headset only, or to the headset and the speaker at the same time: If you are using a headset or other accessory with a remote PTT button, you can use the remote PTT button for phone calls and Private calls. 1 From the main menu, select Settings > Advanced > Headset/Spkr. 2 Press A under Change.
Understanding Status Messages Status Messages Message Description System Busy The system is experiencing heavy traffic. Please try again later. You may receive status messages under certain conditions. Before contacting Customer Care, note the message, numeric code, and the conditions under which it appeared. The following table lists and describes the status messages. Please Try Again An error occurred. Please try again.
Understanding Status Messages Status Messages Message Description Enter SIM PIN Please enter your 4- to 8- digit SIM PIN code. Enter Unlock Code Auto Phone Lock is activated. Enter you unlock code. New Browser Message Memory Full! Warns of low memory for Net Alerts. Scanning for Satellites Searching for GPS satellites. Unable to Locate Sats Could not find GPS satellites. Technical Error A problem occurred in your phone’s GPS circuitry.
Safety and General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR INTEGRATED MULTI-SERVICE PORTABLE RADIO. RF Operational Characteristics Your radio product contains a radio frequency transmitter to convey the information you wish to send as well as occasional automatic signals used to sustain connection to the wireless network, and a receiver which enables you to receive communication and connection information from the network.
Safety and General Information Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone. Two-way radio operation When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the lips.
Portable Radio Product Operation and EME Exposure ALL MODELS WITH FCC ID AZ489FT5832 MEET THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Safety and General Information Electro Magnetic Interference/Compatibility Note: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed or otherwise configured for electromagnetic compatibility. Facilities To avoid electromagnetic interference and/or compatibility conflicts, turn off your radio product in any facility where posted notices instruct you to do so.
Operational Warnings Other Medical Devices Operational Warnings If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. For Vehicles with an Air Bag ! Check the laws and regulations on the use of radio products in the area where you drive. Always obey them.
Safety and General Information as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine. Areas with potentially explosive atmospheres are often but not always posted. Blasting Caps and Areas To avoid possible interference with blasting operations, turn off your radio product when you are near electrical blasting caps, in a blasting area, or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.
Accessory Safety Information Clean the external surfaces of the radio product with a damp cloth, using a mild solution of dishwashing detergent and water. Some household cleaners may contain chemicals that could seriously damage the radio product. Avoid the use of any petroleum-based solvent cleaners. Also, avoid applying liquids directly on the radio product. Accessory Safety Information Important: Save these accessory safety instructions.
Safety and General Information • • • • • • • The cord size is 18AWG for lengths up to 100 feet and 16AWG for lengths up to 150 feet. Do not operate any battery charger if it has received a sharp blow, has been dropped, or has been damaged in any way; take it to a qualified service technician. Do not disassemble a battery charger; take it to a qualified service technician when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
MOTOROLA LIMITED WARRANTY Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES AND SOFTWARE PURCHASED IN THE UNITED STATES OR CANADA PRODUCTS COVERED LENGTH OF COVERAGE Products as defined above. One (1) year from the date of purchase by the first consumer purchaser of the product. Accessories as defined above. One (1) year from the date of purchase by the first consumer purchaser of the product. What Does this Warranty Cover? Subject to the exclusions contained below, Motorola, Inc.
MOTOROLA LIMITED WARRANTY What is not covered? (Exclusions) Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse.
Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided "as is" and without warranty. Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable. What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty.
MOTOROLA LIMITED WARRANTY PRODUCT, ACCESSORY OR SOFTWARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Limited Warranty Motorola Communication Products (International) Note: This Warranty applies in Singapore and the Philippines. I.
Limited Warranty Motorola Communication Products (International) MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment, and all such equipment if expressly excluded from this warranty.
b. Defects or damage from misuse, accident, water, or neglect. c. Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment. d. Breakage or damage to antennas unless caused directly by defects in material workmanship. e. A Product subjected to unauthorized Product modifications, disassemblies or repairs (including, without limitation, the audition to the Product of non-MOTOROLA supplied equipment). f.
Limited Warranty Motorola Communication Products (International) settlement or compromise; and c.
Patent and Trademark Information MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. © 2004 Motorola, Inc. All rights reserved. Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation. T9 is a trademark owned by Tegic Communications. T9® Text Input Patent and Trademark Information copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software.
Index Numerics 2-way radio 80 see also Private calls, group calls, and call alerts 3-way calling 42 A Accessories 15 safety 91 Alpha mode 54 B Backlight 79 Battery 3 care 5 charging 4, 5 door 2 inserting 3 safety 90 Baud rate 81 C Call alerts 27 deleting 28 102 queue 27 receiving 27 responding 27, 28 sending 27 sorting 28 viewing 27 Call forwarding all calls 38 missed calls 39 off 39 Call Hold 42 Call Timers 45 Call Waiting 41 off 41 Calls 3-way 42 answering automatically 79 answering with any key 79 em
searching 32 showing all entries 33 showing only Private IDs 32 SIM card 31 storing fast 34 storing from idle screen 35 storing from Memo 34, 49 storing from recent calls 29, 34 type 29, 31 viewing 32 with non-i315 phones 37 D Direct Launch 25 Display backlight 79 contrast 79 options 8 screen 8 E Email 31, 34, 47 Emergency calls 20 End key 1 F I Faxes receiving 47 sending 47 Icons calls 17 Contacts 31 main menu 9 MOSMS messages 64 Recent calls 29 status 10 text entry 54 iDEN Phonebook Manager 37 Idle
Index Locating Your SIM Card 3 M Memo 49 calling from 49 creating 49 editing 49 storing to Contacts 34, 49 viewing 49 Memory MOSMS messages 65 ring tones 52 voice records 76, 77 Menu key 1, 9 Menus 8, 9 context-sensitive 1, 9 main menu 9 Message center 58, 59 see also messages MOSMS messages 61 voice mail 59 Message notifications 57 setting options 57 Messages 57 see also voice mail, MOSMS 104 messages, and SMS messages receiving 57 MOSMS messages 60 creating 61 deleting 64, 65 drafts 63 icons 64 memory 6
One Touch, setting 43 PUK code 12 R Radio frequency 85 Recent calls 17, 29 deleting 30 display time 81 icons 29 storing to Contacts 29, 34 viewing 29 Redialing 18, 79 Removing the Back Cover 3 Ring tones 31, 50 deleting 53 downloading 52 memory 52 off 50 setting 50 setting in Contacts 33, 52 silent 50, 51 vibrate 50, 51 viewing assigned 52 Ringer 78 see also Ring tones off 78 S Safety 85 accessory 91 battery 90 driving 107 electromagnetic interference 88 medical devices 88 radio frequency 85 Security 80
Index baud rate 48 making 47 mode 48 on 47 Turbo Dial 19 V Voice mail 57, 59 receiving 59 sending calls to 16 setting up 59 Voice name 19, 32 Voice records 75 creating 75 deleting 76 labelling 76 locking 76 memory 76, 77 playing 75 Volume, setting 78, 80 W Waits dialing 43 storing 36 106 Warranty 97 Word mode 54
Driving Safety Tips “Safety is your most important call!” Your Motorola wireless telephone gives you the powerful ability to communicate by voice — almost anywhere, anytime, wherever wireless phone service is available and safe conditions allow. But an important responsibility accompanies that benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility.
Driving Safety Tips • Your phone can perform many other functions besides allowing you to make and receive calls. Do not let these features distract you from driving. Use them only when it is safe to do so. • Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. • Use your wireless phone to help others in emergencies.
