Digital Multi-Service Data-Capable Phone User's Guide

Additional Call Services
41
5. Enter your new passcode then select “OK”.
6. At the “Repeat Code” screen, enter your new passcode again then
select “OK”.
Be sure to record your new passcode and store it in a safe place.
Alternate Phone Line (iDEN Only)
If your phone is activated with two phone lines, you can switch between
them. To change phone lines, your phone must be at the Phone Ready
screen. The following settings are independent for each phone line.
When you enable a setting, it applies only to the active line.
• Ringer Volume
• Auto Answer
• One-minute Beep
• Automatic Display Timer
• Resettable Timer
• Total Call Timer
• Selectable Ring Styles
• Call Forwarding
Setting the Active Line
At the “Phone Ready” screen:
1. Press n until you see “Line2”. (If you
are on Line 2, you will see “Line1”.)
2. Do one of the following:
• Select “Line2” to activate Line 2
when Line 1 is the active line.
• Or, select “Line1” to activate Line 1 when Line 2 is the
active line.
Outgoing calls will be made on the selected line.
Receiving a Call
You can receive calls on either line, regardless of the active line setting.
• If you receive a call on the currently active line, that icon simply
flashes.
• If you receive a call on the line that is not currently active, the active
line icon remains lit and the alternate line icon flashes.
Phone Ready
(System Name)
Line2
11:48p 08/21
Line2