Digital Multi-Service Data-Capable Phone User's Guide

18
www.motorola.com
The second line of text on the Phone Ready screen displays the System
Name, which is the name of the network providing service in the iDEN
or GSM service area.
If your Home carrier is an iDEN carrier, then when you are in an iDEN
service area, the third line displays the local time and date. When you
are in the GSM service area, the third line displays the name of your
Home carrier.
The LED indicator located on the front of the i2000plus phone shows
the service state. See Table 1 .
Turning Off Your i2000plus Phone
Press and hold f until you see the message “Powering Off”.
Light Sensor
On your i2000plus phone, when a key is pressed, the light sensor will
activate the backlight only when your phone is in low light conditions. If
illumination is needed, even when the backlight is not present, you can
manually override the sensor by pressing and holding n. This will
activate the backlight. In a charger, the backlight will always be
illuminated.
Table 1: Status Light (LED) Indicator
LED Indicator Status of Your i2000plus Phone
Flashing Red Registering—your i2000plus phone is
signing on to your carrier’s network.
Please wait.
Solid Red No service—your i2000plus phone
cannot sign on. It will continue trying to
connect every two minutes as long as
it is turned on.
Flashing Green In service—your i2000plus phone is
ready to use.
You can now place and receive calls.
Solid Green In use—your i2000plus phone is
currently being used. Check to make
sure that you ended the last call by
pressing e
.