User Guide

73
English
PHONE
5 (For Conventional operation with auto access
only). You hear a series of tones, indicating
that an access code is being sent
automatically, and see your access code:
–or–
Enter your access code using the keypad.
6 When you hear a dial tone:
Enter the phone
number using the
keypad.
–or–
+ or ? to
select a number from
the phone list.
–or– (see step 7)
7 a Press and release the preprogrammed
Speed Dial button (see step 6) to use the
Speed Dial feature.
b Press the key (1 to 9) corresponding to the
number you want to call, or press 0 if you
want to call the last number dialed.
XXX-XXX-XXXX
XXX-XXX-XXXX
Note: To redial the last number dialed (if not
using Speed Dial), press and release
the PTT button immediately after the
access code is sent. Your radio sends
the last number dialed.
–or–
If you entered your access code using
the keypad, press the ? key once
to access the last number dialed; then
press and release the PTT button.
8 Press and release the PTT button, if required
for your radio.
9 Hold your radio in a vertical position with the
microphone 1 to 2 inches (2.5 to 5
centimeters) away from your mouth. Press the
PTT button to talk; release it to listen.
10 To disconnect a phone call, do one of the
following:
Enter the deaccess code using the keypad.
–or–
If your radio has the deaccess code
programmed, go to step 9.