User Guide

63
English
SCAN
AUTO GROUP SCAN G
(LTR TRUNKED OPERATION ONLY)
Auto Group Scan automatically scans
talkgroups within an LTR Trunked zone as
programmed by your dealer. Auto Group Scan
can be non-prioritized or prioritized:
• Non-prioritized Auto Group Scan
automatically scans all talkgroups
programmed with Auto Group Scan.
• Prioritized Auto Group Scan automatically
scans the selected talkgroup and all lower
four-numbered talkgroups. For example, if
Talkgroups 1, 3, and 4 have been
programmed by your dealer with Auto
Group Scan and Talkgroup 4 is selected,
your radio automatically scans talkgroups
1, 3, and 4, and skips Talkgroup 2.
To start Auto Group Scan:
Select a talkgroup that has been programmed
for Auto Group Scan by your dealer.
Note: You do not have to press a
preprogrammed Scan button.
• The display shows G when non-
prioritized Auto Group Scan has been
activated.
• The display shows H when prioritized
Auto Group Scan has been activated.
• The LED indicator does not light up during
Auto Group Scan.
To stop Auto Group Scan:
Select a talkgroup that has not been
programmed for Auto Group Scan by your
dealer.
ALL GROUP SCAN G
(LTR TRUNKED OPERATION ONLY)
With All Group Scan, your radio scans all
talkgroups within the selected LTR Trunked
zone.
When All Group Scan is enabled:
2 + or ? until
3 ) to select
You see the current scan status.
4
+ or ? until
–or–
5 ) to confirm your selection.
Pass Grp Scan
Pass Grp Scan
PpGp Scan Off?
PpGp Scan On?