User Guide

8
English
INTRODUCTION
CONVENTIONAL RADIO SYSTEMS
Conventional radio systems typically refer to
unit-to-unit communications through a single
channel. Conventional systems also allow
radio users to extend communication coverage
by relaying their messages through a repeater.
To ensure coordinated use by multiple
talkgroups, each radio user must monitor the
channel or repeater before transmitting to
verify that the system is not currently busy.
HT1250•LS+ RADIO FEATURES
Radio Wide Features
• 14-Character Alphanumeric Display
• 7 Programmable Feature Buttons
• Up to 15 PassPort and/or LTR Zones with
up to 16 Talkgroups per Zone
• Up to 16 or 32 Conventional Channels
(depending on model capability)
•X-Pand
™
Audio Enhancement
• Home Channel Revert
• Telephone Interconnect
• User-programmable Phone and Scan Lists
• Voice Storage Capability
PassPort Zone Features
• Unique Mobile Identification Number (MIN)
per radio
• Unique Electronic Serial Number (ESN) per
radio
• Registration/Deregistration upon Power-up
and Power-down
• Automatic Seamless Roaming between
Networked Sites
• Site/Talkgroup Restriction
• Optional Primary Talkgroup
• Primary Talkgroup Transmit Inhibit
• Registered Site and Mobile Identity View
• User-initiated Roam Request
• Primary Auto Group Scan and PassPort
Group Scan
• Roam (Site) Lock
• Push-To-Talk (PTT) ID Aliasing
Note: Throughout this manual there are
features listed as Trunked and
Conventional. Trunked indicates
the feature functions in both
PassPort and LTR zones unless
otherwise noted. Conventional
indicates the feature functions in
Conventional zones only.