User guide

72
English
PHONE
MAKING A PHONE CALL D
THROUGH A CONVENTIONAL
SYSTEM
To initiate a Phone Call:
Press the preprogrammed Phone button, and
skip to step 5.
–or–
Press the PTT button, and if the Hot keypad
feature has been programmed by your dealer,
do the following:
5 Press and Release the PTT button.
• If phone access is successful, a dial tone
sounds.
• If phone access is unsuccessful, a
low-pitched alternating tone sounds.
Disconnect the call (see step 8) and try
again.
6 Enter the phone number with the keypad. The
number is automatically sent without pressing
the PTT button again.
–or–
+ or ? to
select a number from
the phone list.
7
Press and release the PTT button again to
send the number.
8 Hold your radio in a vertical position with the
microphone 1 to 2 inches (2.5 to 5
centimeters) away from your mouth. Press the
PTT button to talk; release it to listen.
9 Press and hold
( to disconnect the call
and exit Phone mode.
The display no longer shows D.
XXX-XXX-XXXX
1 Select a Conventional zone and channel that
have been programmed for telephone.
2
) to enter Menu mode.
3 + or ? until
4 ) to select
The display shows D when you are in Phone
Mode.
Phone
Phone