User guide

65
English
SCAN
Note: If you enter Menu mode while your radio
is scanning, scanning stops. The radio
resumes scanning when you exit Menu
mode.
To start or stop a System Scan:
Press the preprogrammed Scan button (see
page 22) to start or stop scanning,
–or–
Do the following:
DELETING A NUISANCE CHANNEL
OR TALKGROUP
Note: This feature is available only with
PassPort Group Scan or System Scan
operation.
If a talkgroup or channel continually generates
unwanted calls (a “nuisance” channel), use the
preprogrammed Scan button to temporarily
delete the talkgroup or channel from the Scan
list.
1 ) to enter Menu mode.
2 + or ? until
3 ) to select
You see the current scan status.
4 + or ? until
–or–
5 ) to confirm your selection.
System Scan
System Scan
Sys Scan On?
Sys Scan Off?
Notes:
• In conventional zones only, if there is activ-
ity on a non-priority channel, the radio dis-
connects the user from the current
conversation and automatically switches to
an active priority channel. This is indicated
with a short alert tone.
• Your radio can either revert to a “selected”
channel or the “last active” channel
depending on its programming. For addi-
tional details, contact your local dealer.