User guide

36
English
PASSPORT
TRUNKING
PTT ID ALIAS
Your HT1250•LS+ radio supports the display of
the Alias of the calling radio when receiving a
group dispatch call in PassPort mode. This
Alias corresponds to the MIN of the calling
radio in the Radio Call List.
Note: Alias will be displayed only if
preprogrammed in the radio via the
PassPort Customer Programming
Software (PPCPS). Otherwise, the
MIN is displayed.
ROAM REQUEST
Since your radio has the RSSI feature, your
HT1250•LS+ radio automatically roams to an
affiliated site when the signal from the
registered site becomes too weak for quality
communication. This RSSI threshold is
programmed by your dealer. However, if you
believe the signal strength would be better on
another site, you may want to manually initiate
the roaming process. This feature is called
Roam Request.
To Start a Roam Request:
Note: This message can still be activated
even if your radio is not registered.
1
Press the preprogrammed Roam Request
button (see page 16).
2
When your radio is searching for a new site or
attempting registration to a site, you
see:
3
When your radio has successfully registered to
the new site on the PassPort System,
you see:
–or–
SEARCHING
REG SITE XXX