- DCT5100 High Definition Cable Receiver User Guide

DCT5100 User Guide
Preliminary Copy 5/01/03 25
Connecting a Stereo TV, VCR, and DVD
This cable configuration may be used for a mono or stereo VCR,
because the VCR audio and video jacks are not used.
If your TV supports multiple sets of video and audio inputs (such as
VID1, VID2, etc.), see the diagram Connecting a Stereo TV and Stereo
VCR to connect your DCT5100, VCR and TV. When you have completed
those connections, refer to the diagram illustrated here to connect your
DVD to your TV.
1 Connect an RF coaxial cable to the cable wall outlet and the CABLE
IN
connector on the DCT5100.
2 Connect an RF coaxial cable to the TO TV/VCR connector on the
DCT5100 and the
CABLE/ANTENNA IN connector on the VCR.
3 Connect an RF coaxial cable to the TO TV connector on the VCR
and the
CABLE/ANTENNA IN connector on the stereo TV.
4 Connect a stereo audio cable to the INPUT AUDIO LEFT and RIGHT
connectors on the stereo TV and the AUDIO OUT ANALOG R and L
connectors on the DVD.
5 Connect a video cable to the INPUT VIDEO connector on the stereo
TV and the
VIDEO OUT VIDEO connector on the DVD.
Or
Connect an S-video cable to the
INPUT S-VIDEO connector on the
stereo TV and the
VIDEO OUT S-VIDEO connector on the DVD.
The video connection method does not support high definition video. For
more information, see “Connecting your DCT5100 to an HDTV – Video
Only” on page 16.