Operating instructions

GX2-PSAC10D-R Installation and Operation Manual

Appendix B

Menus

This appendix provides information about:

 Using the optional SDU with display to access GX2-PSAC10D-R menus

 The menu structure

 Alarms

Table B-1 identifies the procedure for navigating through the GX2-PSAC10D-R menus using the

optional SDU with display:

Table B-1

GX2-PSAC10D-R menus

To Use

Scroll to the top-level

power supply menu

Press the up or down arrows to scroll to the PS1 or PS2 menu. If a power

supply is not installed, EMPTY is displayed after the PS1 or PS2.

Enter a level two

menu from the

top-level PS1 or PS2

Press the right arrow. Then press the up and down arrows to scroll to the

MODULE STATUS MENU or the MODULE INFO MENU.

Change a parameter

value

Press the right arrow to enter edit mode.

Use the up and down arrows to change the value.

Press

ENTER to save the new value or press the left arrow to exit edit

mode without changing the value.

If you press no key for 10 to 15 seconds, you exit edit mode with the value

unchanged.

Go up from level two

to level one

Press the left arrow.

The following subsections provide the menu structure:

Module Status Menu

The italicized x’s in this table indicate a displayed variable:

Parameter Value

AMBIENT TEMPERATURE:

xx.x °C

HEATSINK TEMPERATURE:

xx.x °C

BACKPLANE

+12 V:

+5.1 V:

+3.7 V:

xx.x V

x.x V