Projector User Manual

GT10/GT30 5.1 GT10 Configuration Settings

5.1 GT10 Configuration Settings

Before using the GT10 for the first time, it must be set up by entering the GT10

configuration settings indicated below. Always check and enter the settings under

“Basic communication area to PLC”. For instructions on setting up the GT10, see page

29.

5.1.1 Two Types of GT10 Configuration Settings

1. Entering configuration settings from GTWIN screen creation tool page 73. .

With this method, GT10 configuration settings are entered from GTWIN screen creation

tool, and the GT10 configuration file is sent to the GT10. Most items can be set using

this method.

GTWIN

GT10

configuration

file sent

2. Entering configuration settings from the GT10 main unit page 85. . . . . . . . . .

Some of the settings, such as the communication parameters, the internal clock, and

adjustments of the liquid crystal display contrast, can be set using the system menu of

the GT10. Settings are entered using the touch switches on the front of the panel.

GT10

EXPLANATION

Items in the GT10 Configuration Settings

Items that can be set from GTWIN

Items that can be set

either way

Items that can be set from the

GT10 system menu

Title setting Communication parameters

Clock division setting for the internal

clock

Type of PLC connected LCD contrast setting

Basic communication area to PLC Communication parameters

Communication parameters Memory initialization

Auto–paging screen settings Self–diagnosis

Startup screen (default screen) settings

Reference destination setting for clock

Backlight control

Touch sounds

Hold PLC device

GT internal device hold