Projector User Manual

GT10/GT30 4.1 Connecting the FP–Sigma
43
CAUTION
Because loose wiring is used for connection to the FPΣ COM. port, no
dedicated cable is available. The cable should be provided by the
customer. When purchasing a cable, the following precautions should
be observed:
Shielded wire with a size of AGW#28 to 16 (conductor
cross–section surface area: 0.08 mm
2
to 1.25 mm
2
) should be used
for connections.
For wiring procedures, please refer to “Wiring the COM. Port” on
page 23.
4.1.2 Connecting to the TOOL Port
AIGT8192
GT10
FPΣ TOOL port
GT30
FPΣ communication format settings
System register no. Item Value Set
410 TOOL Port
Unit number
1
412 Modem connection No modem connection
413 Data length 8 bits
Parity check Yes, Odd
Stop bits 1 bit
Line return code CR (Fixed)
Start code no STX (Fixed)
415 COM. Port 1
Communication speed setting
19200 bits/s