Manualshelf

Projector User Manual

ManualsBrandsMotorola ManualsProjectorGT10
151152153154155156157158159160
GT10/GT30 8.4 Replacing the Waterproof Packing
132
8.4 Replacing the Waterproof Packing
If the panel is being detached from the GT main unit and then reattached, the waterproof
packing should be replaced, in order to assure that the panel remains waterproof (IP65).
Product name Contents Product number
Waterproof packing Waterproof packings for replacement (set of 10)
For GT10 AIGT181
For GT30 AIGT381
Replacing the Waterproof Packing
Follow the steps below to replace the packing:
1. Remove the currently attached waterproof packing.
Remove the attached waterproof packing from the GT main unit.
2. Attach the provided waterproof packing.
Take out one of the replacement waterproof packing pieces and attach the outer edge
as shown in the illustration (do not use the inner edge).
When doing this, fasten it to the front frame, being sure not to twist the waterproof
packing.