User`s manual

- The PROGRAM CODEPLUG function is used to transfer codeplug information from the

computer to the radio codeplug.

The time required to PROGRAM a codeplug will depend directly on your computer type and the

size of the codeplug you are programming. The status of the PROGRAM operation will be

displayed on the screen.

CHANGE/VIEW

CHANGE/VIEW is a multi-level menu that is used to change, view, or modify codeplug features

and option configurations. All codeplug parameters are classified as either RADIO-WIDE or

CHANNEL related. CHANGE/VIEW permits access to each of these categories.

Unlike the SERVICE function, a codeplug must be loaded into your computer's memory (via the

GET/SAVE functions) before you can access the CHANGE/VIEW screens. You may

CHANGE/VIEW an archive file without a radio connected.

Warning: CHANGE/VIEW does NOT actually modify the radio codeplug data, but instead it

modifies a copy of the data retrieved from the codeplug (or archive file) via the GET/SAVE

functions.

After all CHANGE/VIEW modifications are completed, you MUST return to the GET/SAVE menu

and PROGRAM the changes back into the radio or SAVE them to a new archive file. Otherwise

the modifications will be lost when you turn off your computer.

CHANGE/VIEW RADIO-WIDE CONFIGURATION

RADIO-WIDE Configuration is used to CHANGE/VIEW radio parameters and options that affect

overall radio operation, i.e. those not just related to a specific channel such as the time-out-timer.

Warning: CHANGE/VIEW does NOT actually modify the radio codeplug data, but instead it

modifies a copy of the data retrieved from the codeplug (or archive file) via the GET/SAVE

functions.

After all CHANGE/VIEW modifications are completed, you MUST return to the GET/SAVE menu

and PROGRAM the changes back into the radio or SAVE them to a new archive file. Otherwise

the modifications will be lost when you turn off your computer.

Dealer Programming Mode

When enabled, the user is allowed to modify channels frequencies, PL/DPLcodes, and other

radio-wide settings via front panel prgrammability (FPP).