User guide

34
English
SPECIAL CALLS
To initiate a data call via the keypad: To initiate a Data call via the contact list
In this method data consists of digits only which are
pre-programmed into your radio by your dealer.
Note: The maximum data message size is limited
to 20 characters which includes address
information and data selection characters.
1 *2* Part of modiÞer
2
613 Example of data
digits in range 0-9
3
* Final part of modiÞer
4 Enter Called radio address
5 Display shows:
*2*613*NNNNN
(where NNNNN is called
radio address.)
6 Press PTT button or
# to make a call to the
dialled numbers
Tone D sounds
Display shows:
Sending Data
Number
7 Press CLEAR button or *# at any time
to delete dialled numbers and return radio to
IDLE STATE when tone H sounds
1
c to enter Menu Mode.
2
m until: Contact List
3
c to select: Contact List
4
m until:
r
r
r
Alpha Alias
Number
Ring Tone
Alpha Alias
5 c or PTT button to make radio call.
Display shows:
Sending Data
Alias/Number
6
When Þnished with call.
7 CLEAR BUTTON or
*#
Tone A sounds
Call Ended