Specifications

Loading the Codeplug in the Computer
There are two different way to load the codeplug in your computer.
• You already have a codeplug for this radio in your computer:
• In the CPS software, use in the menu bar File, click Open and search for the
codeplug file you need with a .cpg extension. (Example: GP380_Nyala.cpg).
Then click [Open].
• You do not have a codeplug for this radio in your computer:
• In the CPS software, use the menu bar File click Read device in order to load
the radio configuration (codeplug) into your computer. It could be useful to
save this radio configuration in your computer with an appropriate file name
before reprogramming.
The preferred method is to install the standard codeplug and adjust it accordingly.
Programming the Radio
Before we can use the radio, certain items need to be adjusted:
1. Start up display
2. Contact list
3. Status decode
4. Status encode
5. Per channel
1. Encoder definitions
2. Decoder definitions
Start up Display
• Open the “Tree View” by clicking the small [+] sign.
• Expend the Per Radio tree with [+], click Miscellaneous, click [Display and
Keypad].
• On the Radio On message enter the Country name abbreviation and the user
callsign. (Examples: SEN DR 1 SUD NF 7.2 GUI CS 4.8.4 C Mobile
123)
• This adjustment is not needed on the GP340 radios, as it is without display.
• Click [Close].
Radio Operators Training Manual Version 27/11/2007 84