Technical information

Chapter 2: Developer Board and Interfaces Description
August 31, 2009 G24/H24 - Developer’s Kit 25
ADC channel mapping is shown in Table 2-13.
Table 2-12:
Voltage Level Settings for A/D Switches (J161)
Reference Analog Voltage Level
LEVEL8 Setting 2.3V
LEVEL7 Setting 1.93V
LEVEL6 Setting 1.59V
LEVEL5 Setting 1.24V
LEVEL4 Setting 0.96V
LEVEL3 Setting 0.68V
LEVEL2 Setting 0.37V
LEVEL1 Setting 0.06V
Table 2-13: A/D Selection Switch Settings (J160)
Reference Description
ADC1 Routing voltage level to ADC1 (G24/H24 J1/37)
ADC2 Routing voltage level to ADC2 (G24/H24 J1/43)
ADC3 Routing voltage level to ADC3 (G24/H24 J1/47)
N.C Not Used