Technical information

Initial Setup
10 G24/H24 - Developer’s Kit August 31, 2009
Important: The G24/H24 Developer Board enables connection of additional audio devices,
which are not supplied with the Developer Kit. These devices are described in
“Configuration” on page 12.
Figure 2-4: Audio Connectors (Left Side)
SIM Card
To Insert the SIM Card
Note: A test SIM card is provided with the G24/H24 Developer’s Kit.
• Insert a SIM card (Figure 2-5) into the SIM tray (J100) with the contacts down and the
cut-off corner to the front and right
A diagram on the cover indicates how to insert the SIM card.
Figure 2-5: SIM Tray
Antenna
To Attach the Antenna
• Screw the supplied antenna into the antenna base, located at the bottom-right corner on top of
the Developer's Kit.
The Developer's Kit arrives configured to operate with its on-board internal antenna. The
EXT ANT and INT ANT connectors are connected together using an external RF cable, on
the board's right side (Figure 2-2, on page 8).
SIM Tray