FR68 Series Mobile Computer User Guide
FR68 Series Mobile Computer User Guide 72E-1 19055-01 Rev.
FR68 Series User Guide © 2009 by Motorola, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Motorola. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis.
FR68 Series User Guide Revision History Changes to the original manual are listed below: Change -01 Rev. A Date Description 2009/06/02 Initial release.
4
Table of Contents Table ofContents About This Guide .................................................................................................................................... 11 Introduction ...................................................................................................................................... 11 Documentation Set........................................................................................................................... 11 Configurations ............
Table of Contents Changing the Power Settings....................................................................................................23 Changing the Backlight Settings ...............................................................................................23 Turning Off the Radios ..............................................................................................................24 Chapter 2 Using the FR68 Series ..................................................................
Table of Contents Enabling Bluetooth ...........................................................................................................................63 Bond New Device(s) ........................................................................................................................63 File Transfer Services ......................................................................................................................65 Bluetooth Settings ............................................
Table of Contents FR6874/FR6876 Service Verification ...............................................................................................99 Ensuring Network Coverage .....................................................................................................99 Configuring a Data Connection ...............................................................................................100 Establishing a Data Connection .......................................................................
Table of Contents Cleaning Cradle Connectors ...................................................................................................122 Cleaning Frequency................................................................................................................122 Troubleshooting the FR68 Series...................................................................................................122 Bluetooth Connection............................................................................
10
About This Guide About This Guide Introduction This guide provides information about using the FR68 Series Enterprise Digital Assistant (EDA) and accessories. NOTE Screens and windows pictured in this guide are samples and can differ from actual screens. Documentation Set The documentation set for the FR68 Series provides information for specific user needs, and includes: z FR68 Series Quick Start Guide - describes how to get the FR68 Series up and running.
About This Guide Software Versions This guide covers various software configurations and references are made to operating system or software versions for: z Adaptation Kit Update (AKU) version z Phone version AKU Version To determine the Adaptation Kit Update (AKU) version: Tap Start > Settings > System tab > About icon > Version tab. The second line lists the operating system version and the build number. The last part of the build number represents the AKU number. For example, Build 18552.0.7.
About This Guide Notational Conventions The following conventions are used in this document: z “EDA” refers to the Motorola FR68 series of hand-held computers. z Italics are used to highlight the following: z z z Chapters and sections in this and related documents Icons on a screen.
14
Chapter 1 Getting Started Introduction This chapter lists the parts and accessories for the FR68 Series and explains how to install and charge the batteries, replace the strap, and power on the FR68 Series for the first time. Figure 1-1 Front View and Rear View 1. Scan Button 2. Up Button 15. Battery Door 16.Door Latch 3. Down Button 4. Headset Jack 17. Speaker 18.Camera Flash 5. Reset Button 6. I/O connector 19. Self-view Mirror 20.Camera 7. Microphone 8. Keypad 21.
Getting Started Unpacking Carefully remove all protective material from the FR68 Series and save the shipping container for later storage and shipping. Verify that you received the following: z FR68 Series EDA z 1950 mAh Lithium-ion battery z Battery door assembly z FR68 Series Cradle Adaptor Clip z Tethered stylus z Protective screen protector, installed on display window z Regulatory Guide z Quick Start Guide. Inspect the equipment for damage.
Getting Started FR68 Series Accessories (Continued) Part Number Description FR68 Series Cradle Adaptor Clip – Adapts FR68 Series mobile computer to the MN3800AAAPCD cradle. Pack of 3. FR68 Series Cradle Adaptor Clip – Adapts FR68 Series mobile computer to the MN3800BAAPCD cradle. Pack of 10. MN3800AAAPST FR68 Series spare stylus with tether. Pack of 3. MN2800AAAPSC Screen protector for 2.8” QVGA display. Pack of 3. 90-17C28-001R Hands free headset (earbud).
Getting Started 3. Press the red Power button. 4. Tap Start > Phone > Menu > Options > Network tab and verify that the service provider appears in the Current network: field. 5. Make a call to verify connection. Installing the Main Battery NOTE The FR68 Series ships with a 1950 mAh battery. An optional 3600 mAh battery is available. To install the main battery: 1. Insert the battery, bottom first, into the battery compartment in the back of the FR68 Series.
Getting Started Figure 1-4 Removing the SIM Card Removing the Battery 1. Remove the battery door. 2. Wait for five seconds. 3. Remove the battery. Charging the Battery CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on Page 120.
Getting Started LED Charge Indicators Charging/Battery Indication Status LED Table 1-2 Off FR68 Series is not charging. FR68 Series is not inserted correctly in the cradle or connected to a power source. Charger/cradle is not powered. Slow blinking amber FR68 Series is charging. Solid green Charging complete. Note: When the battery is initially inserted in the FR68 Series, the amber LED flashes once if the battery power is low or the battery is not fully inserted.
Getting Started Checking Battery Status To check the charge status of the main battery in the FR68 Series, tap Start > Settings > System tab >Power icon to display the Power window. To save battery power, tap the Advanced tab and set the FR68 Series to turn off after a specified number of minutes. Micro Secure Digital (microSD) Card The microSD card slot provides secondary non-volatile storage. The slot is located on the side of the FR68 Series (see Figure 1-5).
Getting Started Removing the Screen Protector A screen protector is applied to the FR68 Series. Motorola recommends using this to minimize wear and tear. Screen protectors enhance the usability and durability of touch screen displays. To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then carefully lift it off the display. Figure 1-6 Removing the Screen Protector CAUTION NOTE Do not use a sharp object to remove the protector.
Getting Started Battery Management Observe the following battery saving tips: NOTE The FR68 Series factory default settings for the WWAN and WLAN radios are set to ON. z Leave the FR68 Series connected to AC power at all times when not in use. z Set the FR68 Series to turn off after a short period of non-use. z Set the backlight to turn off after a short period of non-use. z Turn off all wireless activities when not in use. z Power off the FR68 Series when charging to charge at a faster rate.
Getting Started Turning Off the Radios Windows Mobile 6.1 devices include Wireless Manager, which provides a simple method of enabling, disabling, and configuring all the device’s wireless capabilities in one place. To open Wireless Manager, tap the Connectivity icon or tap Wireless Manager on the Today screen. Figure 1-7 Opening Wireless Manager Select Wireless Manager. Figure 1-8 Selecting Wireless Manager NOTE Wireless connection options vary depending upon configurations.
Chapter 2 Using the FR68 Series Introduction This chapter explains the buttons, status icons, and controls on the FR68 Series, and provides basic instructions for using the FR68 Series, including powering on and resetting the FR68 Series, and entering and capturing data. The FR68 Series factory default radio states are: z Bluetooth - OFF z Phone - ON z Wireless LAN - ON. Today Screen The Today screen displays important information, such as upcoming appointments and status indicators.
Using the FR68 Series Status Icons The Navigation bar at the top of the screen can contain the status icons listed in Table 2-1. Table 2-1 Icon Status Icons Function Notification Description Backup Battery Low. Notification that one or more instant messages were received. Notification that one or more e-mail/text messages were received. Notification that one or more voice messages were received. There are more notification icons than can be displayed. Tap to display remaining icons.
Using the FR68 Series Table 2-1 Icon Status Icons (Continued) Function WAN Description Call missed. Dialing while no SIM card is installed. Voice call in progress. Calls are forwarded. Call on hold. Speakerphone is on. Antenna/signal icon: wireless on/good signal. Antenna/signal icon: wireless off. Antenna/signal icon: no service or searching. HSDPA connecting. (FR6876 only) HSDPA in use. (FR6876 only) 3G connecting. (FR6876 only) 3G in use. (FR6876 only) GPRS connecting. (FR6874 and FR6876) GPRS in use.
Using the FR68 Series The command bar at the bottom of the screen can contain the task tray icons listed in Table 2-2. Table 2-2 Task Tray Icons Icon Name ActiveSync Description Active serial connection between the FR68 Series and the host computer. Programs Table 2-3 lists the default programs on the Start menu. Table 2-3 Icon Programs in the Start Menu Name Office Mobile Description Use the complete suite of Microsoft® Office applications for your mobile device.
Using the FR68 Series Table 2-4 lists programs that are listed in the Programs window. Table 2-4 Icon Programs in Program Window Name Description Games Bubble Breaker, Solitaire Sample AP ScanWedgeFR, Notify, and Scanner ActiveSync Synchronize information between the FR68 Series and a host computer or the Exchange Server. Calculator Perform basic arithmetic and calculations, such as addition, subtraction, multiplication, and division. Camera Take photos and videos.
Using the FR68 Series Settings Table 2-5 lists control applications preinstalled on the FR68 Series. Tap Start > Settings to open the Settings window. Table 2-5 Icon Settings in the Setting Window Name Description Personal Tab Buttons Assign a program to a button. Input Set options for each of the input methods. Lock Set a password for the FR68 Series. Menus Set what programs appear in the Start menu. Owner Information Enter personal information on the FR68 Series.
Using the FR68 Series Table 2-5 Icon Settings in the Setting Window (Continued) Name Description System Tab 802.11d Tools Enable or disable 802.11d. About View basic information such as the Windows Mobile® version and type of processor used on the FR68 Series. Backlight Set the display backlight time-out and adjust brightness. Certificates See information about certificates installed on the FR68 Series.
Using the FR68 Series Table 2-5 Icon Settings in the Setting Window (Continued) Name Description Regional Settings Set the regional configuration to use, including the format for displaying numbers, currency, date, and time on the FR68 Series. Remove Programs Remove programs that you installed on the FR68 Series. Screen Change the screen orientation, re-calibrate the screen, and change the screen text size.
Using the FR68 Series Adjusting Volume To adjust the system volume using the Speaker icon in the navigation bar: 1. Tap the Speaker icon. The Volume dialog box appears. Figure 2-2 Volume Dialog Box 2. Tap and move the slide bar to adjust the volume. 3. Select the On or Off radio button to turn the volume on or off. You can also adjust the system volume using the Sounds & Notifications window, or use the Up/Down button on the side of the FR68 Series.
Using the FR68 Series The Battery icon always appears in the navigation bar when the Today screen is visible. The icon indicates the battery power level. The message displays until the Dismiss button is pressed. Figure 2-4 Battery Icon on the Title Bar Also view the battery status using the Power window. Power Setting 1. Tap Start > Settings > System>Power icon. A power remaining capacity bar appears. Figure 2-5 Main Tab 2. Select the Advanced tab. 3.
Using the FR68 Series Figure 2-7 USB Charge Tab Main Battery Temperature Notifications The temperature notification system displays warnings as the following figures when the temperature within the battery exceeds specific temperature thresholds: Figure 2-8 Main Battery Temperature Notification NOTE The Temperature Warning dialog box remains visible until you tap Hide.
Using the FR68 Series LED Indicators The FR68 Series has three LED indicators. The Scan/Decode LED indicates status for bar code scanning. The Charging/Battery Status LED indicates battery charging and status. The Radio Status LED indicates radio status. Table 2-8 describes the LED indications. Figure 2-9 1. 2. 3.
Using the FR68 Series Resetting the FR68 Series The reset function is cold boot. A cold boot restarts the FR68 Series, and also resets the clock. Data saved in flash memory or a memory card is not lost. Press the reset button to reboot the device. Waking the FR68 Series The wake-up conditions define what actions wake up the mobile computer after it has gone into suspend mode.
Using the FR68 Series Figure 2-11 Unlock Device Window Tap Unlock on the Unlock window. NOTE You can make emergency calls even when the FR68 Series is locked. See Making an Emergency Call on Page 80 for more information. Keypads The FR68 Series offers one type of keypad configuration: alpha-numeric. Alpha-numeric Keypad Configurations The alpha-numeric keypads produce the 26-character alphabet (A-Z, both lowercase and uppercase), numbers (0-9), and assorted characters.
Using the FR68 Series Table 2-8 Alpha-numeric Keypad Descriptions Key Blue Key Orange Key Talk/End(OK) Action Launches applications (shown on the keypad in blue). z Press the Blue key once to activate this mode temporarily, followed by another key. This displays the following icon at the bottom of the screen, until a second key is pressed: z Press the Blue key twice to lock this mode. This displays the following icon at the bottom of the screen: z Press the Blue key a third time to unlock.
Using the FR68 Series Table 2-8 Alpha-numeric Keypad Descriptions (Continued) Key Action Scroll Up and Left Moves up one item. Scroll Down and Right Moves down one item. Soft Keys Accesses the command or menu above it on the screen. Shift Changes the state of the alpha characters from lowercase to uppercase. Moves left one item when pressed with the Orange key. Moves right one item when pressed with the Orange key.
Using the FR68 Series Table 2-9 QWERTY Keypad Input Modes Key Normal Orange + Key Shift + Key Q q Q * W w W 1 E e E 2 R r R 3 T t T + Y y Y _ U u U - I i I = O o O “ P p P , A a A # S s S 4 D d D 5 F f F 6 G g G ( H h H ) J j J / K k K \ L l L : Backspace Backspace Shift Shift Z Z Z 7 X x X 8 C c C 9 V v V % B b B & N n N ! M m M ? , , < ; ENTER Enter 41
Using the FR68 Series Table 2-9 Key QWERTY Keypad Input Modes (Continued) Normal Shift + Key Orange + Key Blue + Key 0 0 0 ) 0 Mail Mail Mail Mail Mail TAB Tab Tab Tab Tab SPACE Space Space Space Space . . > @ . Note: An application can change the key functions. The keypad may not function exactly as described. Function Buttons The FR68’s buttons perform certain functions. Figure 2-13 Function Buttons 1. Scan button 2. Up button 3. Down button 4.
Using the FR68 Series Stylus Use the FR68 Series stylus to select items and enter information. The stylus functions as a mouse. z Tap: Touch the screen once with the stylus to press option buttons and open menu items. z Tap and Hold: Tap and hold the stylus on an item to see a list of actions available for that item. On the pop-up menu that appears, tap the action to perform. z Drag: Hold the stylus on the screen and drag across the screen to select text and picture.
Using the FR68 Series Linear Scanning FR68 Series with an integrated linear scanner have the following features: z Reading of a variety of bar code symbologies, including the most popular linear, postal, and 1-D code types. z Intuitive aiming for easy point-and-shoot operation. Scanning Considerations Typically, scanning is a simple matter of aim, scan, and decode and a few quick trial efforts master it.
Using the FR68 Series 3. Press the scan button. Ensure the red scan beam covers the entire bar code. The Scan/Decode LED lights red to indicate that scanning is in process, then lights green and a beep sounds, by default, to indicate the bar code was decoded successfully.
Using the FR68 Series Camera Application Use the Camera application to take photos and record videos. Figure 2-17 Preview screen Table 2-10 Camera Status Bar Icon Description Shows and hides the Status Bar. Indicates whether still photo or video is enabled. Indicates the current resolution setting. Indicates the brightness setting. Indicates the contrast setting. Indicates the zoom level setting. Press the up and down volume buttons on the side of the FR68 to change the zoom level.
Using the FR68 Series Settings Tap the Settings icon in the Status Bar to set settings for the photo or video camera. Figure 2-18 Setting Options Table 2-11 Settings Options Icon Description Options Enables either photo or video camera. Camera icon – Photo Video icon – Video. For Photos: VGA – 640 x 480 1M – 1 megapixel 1280 x 960 2M – 2 megapixel 1600 x 1200 3M – 3 megapixel 2048 x 1536 Sets the resolution for photos and video. Sets the brightness settings. Sets the contast settings.
Using the FR68 Series Setting Options (Continued) Table 2-11 Icon Definition Options Sets the saturation settings. Sets the location for storing the image or video. 144 CCW 72 CCW 0 72 CW 144 CW -3 -2 -1 0 +1 +2 50 Hz 60 Hz FR68 memory SD memory card Enables or disables the shutter sound for photos or the audio for videos. On Off Turn on or off the flash. On Off Sets the sharpness settings. Sets the frequency.
Using the FR68 Series Recording Video To record video: 1. Press the Camera button on the side of the FR68 or launch the Camera application by tapping Start > Programs > Pictures & Videos icon. 2. Tap the Setting icon on the Status bar to change the settings as required. 3. Switch to the video mode. 4. Press the Camera button to start recording. The REC icon appears in the Status bar. NOTE The time limit for recording videos is 30 seconds.
Using the FR68 Series Using IrDA In a Microsoft Windows Mobile program (except Messaging), and Picture & Videos, you can exchange files using either infrared or Bluetooth. NOTE You can also beam files (not folders) from the File Explorer window. Tap and hold the item you want to send, then tap Beam File from the pop-up menu. First activate the beam function before exchanging files with another IrDA device. To activate the Beam function: 1. Tap Start> Settings> Connections tab>Beam icon. 2.
Using the FR68 Series Infrared Connection Using infrared, you can enable short-range file exchange between your FR68 Series and another IrDA device. Exchanging Files using IR Connection Ensure that the IrDA function on both the FR68 Series and the other device are enabled. To send files via IrDA connection: 1. Switch to the program where you created the item you want to send and locate the item in the list. NOTE Do not cover or block the IrDA window. 2.
Using the FR68 Series 2. On the other device, send the file to the FR68 Series. 3. When the Receiving Data dialog displays, tap Yes. Figure 2-22 Receive File Using WLAN With WLAN, you can access the internet. 1. Tap Start>Settings>Connection tab>Wireless Manager icon>Menu. Or tap the operator name on the Today screen. Figure 2-23 Wireless Manager menu 2. Tap WLAN settings to enter the configuration screen.
Using the FR68 Series 3. Tap the item in the “Network to access” drop box, and select the desired item. Figure 2-25 Networks to access 4. Tap the Network Adapters tab in the Figure 2-25. Figure 2-26 Network Adapter 5. In the Figure 2-26, tap Edit or tap the “network card connections to”, or tap an adapter to modify the settings. Figure 2-27 6. Network Adapter settings modification Tap “Use specific IP address” in the Figure 2-27.
Using the FR68 Series Figure 2-28 7. Figure IP address setting Tap the Name Servers tab in the Figure 2-28.
Using the FR68 Series 1. Tap “Add New…” in the Figure 2-30. Figure 2-31 New wireless networks configuration Note: Only one of the two check box works. 2. Enter the name in the Figure 2-31. Figure 2-32 New wireless networks configuration 3. Tap Next in the in the Figure 2-32. Figure 2-33 Config ure Network Authentication 4. Tap Next in the Figure 2-33.
Using the FR68 Series Figure 2-34 Config ure Network Authentication 5. Tap Next in the Figure 2-34. Figure 2-35 Configure Network Authentication 6. In the Figure 2-35, tick the “Use IEEE 802.1x network access control” check box, then tap Finish to finish the network adding.
Using GPS Navigation Using Chapter 3 Using GPS Navigation Introduction The FR68 Series includes Global Positioning System (GPS) technology using the Qualcomm chip. GPS technology is based on a worldwide system of GPS satellites orbiting the earth that continuously transmit digital radio signals. These radio signals contain data on the satellites’ locations and their exact clock time and are used to determine your location on the earth.
Using GPS Navigation Using 3. In the Hardware tab, select COM6 in the GPS hardware port drop-down list. 4. Tap ok to close the Setting window. NOTE If an application error message appears indicating that the COM port cannot be opened, ensure that a free COM port is selected in the GPS hardware port drop-down list. Operation Acquiring satellite signals may take a few minutes. It is best to be outside and have a clear, unobstructed view of the sky.
Using GPS Navigation Using Answering a Phone Call While Using GPS If you receive a phone call while using your GPS navigation software: 1. Answer the phone call by pressing the Answer button. 2. Once you end the phone call, press the End C all button to resume the audio on the GPS software. NOTE Anytime you are using GPS on the FR68 Series and you receive a phone call, the audio on the GPS navigation software is muted until you finish the call.
Using 60
Using Bluetooth Chapter 4 Using Bluetooth Introduction Bluetooth-equipped devices can communicate without wires, using frequency-hopping spread spectrum (FHSS) radio frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM) band (802.15.1). Bluetooth wireless technology is specifically designed for short-range (30 feet/10 meters) communication and low power consumption. FR68 Series with Bluetooth capabilities can exchange information (e.g.
Using Bluetooth NOTE It is not recommended to perform Bluetooth wireless technology inquiry when high rate 802.11b operation is required. Security The current Bluetooth specification defines security at the link level. Application-level security is not specified. This allows application developers to define security mechanisms tailored to their specific need. Link-level security occurs between devices, not users, while application-level security can be implemented on a per-user basis.
Using Bluetooth Figure 4-1 Disable Bluetooth Enabling Bluetooth To enable Bluetooth, tap Bluetooth icon to enter Wireless Manager. Tap Bluetooth icon to change off to on. The Bluetooth icon changes to indicate that Bluetooth is enabled. Figure 4-2 Enable Bluetooth Bond New Device(s) The FR68 Series can exchange information with bonded devices. To find Bluetooth devices in the area: 1. Ensure that Bluetooth is enabled on both devices. 2.
Using Bluetooth Figure 4-3 Enter Bluetooth Window 5. Tap Menu to enter Settings window. Then tap Add new device to search for Bluetooth devices. Figure 4-4 Add new device Window 6. After the device appears, you have to select it and then tap Next. 7. Enter a passcode to establish a secure connection with other devices. Meanwhile enter the passcode on the target device.
Using Bluetooth File Transfer Services To transfer files between the FR68 Series and another Bluetooth enabled device, ensure the FR68 Series is discoverable and connectable. NOTE Some devices might not require a PIN. This depends upon the device’s authentication. 1. Choose one file as below, tap Menu > Beam picture Menu. Figure 4-6 Select file 2. Then choose the destination device, and wait till Done is showed.
Using Bluetooth Figure 4-8 Bluetooth Settings - Device Info Tab 1. Before bonding a new device, make sure to turn on Bluetooth. 2. If you want other devices to find your FR68 Series, select “Make this device visible to other devices” check box.. COM Ports Tab Use the COM Ports tab set specific outgoing ports for bonded devices. 1. Tap New Outgoing Port. Figure 4-9 2. Add COM Ports Select the device you want to add. Then tap Next.
Using Bluetooth Figure 4-10 3. Select device Select a port from drop-down list. Then tap Finish.
68
ActiveSync Chapter 5 ActiveSync Introduction To communicate with various host devices, install Microsoft ActiveSync (version 4.5 or higher) on the host computer. Use ActiveSync to synchronize information on the mobile computer with information on the host computer. Changes made on the mobile computer or host computer appear in both places after synchronization. ActiveSync software: z Allows working with mobile computer-compatible host applications on the host computer.
ActiveSync Accessories provides the accessory setup and cable connection information for use with the mobile computer. The mobile computer communication settings must be set to match the communication settings used with ActiveSync. 1. On the mobile computer tap Start > Programs > ActiveSync icon. The ActiveSync window appears. Figure 5-1 ActiveSync Window 2. Tap Menu > Connections. 3. Select the connection type from the drop-down list. 4.
ActiveSync 2. In the ActiveSync window, select File > Connection Settings. The Connection Settings window appears. Figure 5-3 Connection Settings Window 3. Select the appropriate check box for the type of connection used. 4. Select the Show status icon in Taskbar check box. 5. Select OK to save any changes made.
ActiveSync 2. Click Next. Figure 5-5 Synchronization Directly With a Server Window 3. Select the check box to synchronize with a server running Microsoft Exchange if applicable. 4. Click Next.
ActiveSync 5. Select the appropriate settings and click Next. Figure 5-7 Wizard Complete Window 6. Click Finish. Figure 5-8 ActiveSync Connected Window During the first synchronization, information stored on the mobile computer is copied to the host computer. When the copy is complete and all data is synchronized, the mobile computer can be disconnect from the host computer. For more information about using ActiveSync, start ActiveSync on the host computer, then see ActiveSync Help.
74
Chapter 6 Using the Phone Introduction Use the FR68 Series to make phone calls, set up speed dials, keep track of calls, and send text messages. Your wireless service provider may also provide other services such as voice mail, call forwarding, and caller ID. Also use the integrated phone to connect to an ISP or work network in order to browse the Web and read e-mail.
Using the Phone FR68 Series is set to wake with any key. Turning the Phone On and Off Windows Mobile 6.1 devices include Wireless Manager, which provides a simple method of enabling and disabling the phone. To open Wireless Manager, tap the Connectivity icon. Figure 6-2 Opening Wireless Manager Select Wireless Manager. The Wireless Manager window appears. To toggle on or off the phone, tap blue Phone bar. To configure settings for a connection, tap Menu > Phone Settings.
Using the Phone Handset Mod Figure 6-3 Audio Modes Speaker Mode Headset Mode Using a Wired Headset You can use a stereo headset for audio communication when using an audio-enabled application. To use a headset, plug the headset jack into the audio connector on the side of the FR68 Series. Set the FR68 Series’ volume appropriately before putting the headset on. Plugging a headset into the jack mutes the speaker. For the best audio performance, Motorola recommends a 2.
Using the Phone The following dialog box displays when a Bluetooth headset connection is established. WWAN Bluetooth Audio Notification Dialog Box Figure 6-5 Adjusting Audio Volume Use the Volume Control Slider or the keypad keys to adjust the volume of the ringer when not in a call and the audio volume when in a call. Phone Volume Slider Figure 6-6 Phone Volume Slider To adjust the volume tap the Speaker icon in the Title bar. Move the slider up or down to adjust the volume.
Using the Phone Using the Phone To make a call using the phone keypad: 1. Tap Start > Phone or press the green phone key on the FR68 Series’ keypad. 2. From the Phone keypad, tap the number to call. 3. Tap Talk. 4. Tap End to stop dialing or end the call. NOTE Alternatively, use the green and red phone keys on the FR68 Series keypad to dial (green) and end (red) calls. If you tap a wrong number, tap Delete key to erase each subsequent digit of a number.
Using the Phone Using Call History To make a call using Call History: 1. Tap Start > Phone or press the green phone key on the FR68 Series’ keypad. 2. From the Phone keypad, tap Call History. Figure 6-8 Call History 3. Tap the phone icon next to the number to begin dialing and return to the phone keypad. 4. Tap End or press the red phone key on the FR68 Series keypad to stop dialing or end the call. Making a Speed Dial Call Use Speed Dial to call someone saved in the speed dial directory.
Using the Phone inserted. Your service provider can program additional emergency numbers into your SIM card. However, your SIM card must be inserted in your phone in order to use the numbers stored on it. See your service provider for additional information. When the alpha-numeric keypad phone is locked, press the Orange key twice to set the keypad to numeric mode and then enter the emergency number. NOTE Emergency numbers vary by country.
Using the Phone Smart Dialing Smart Dialing makes it easy to dial a phone number. When you start entering numbers or characters, Smart Dialing automatically searches and sorts the contact entries on the SIM card, in Contacts, and the phone numbers in Call History (including incoming, outgoing, and missed calls). You can then select the desired number or contact from the filtered list to dial.
Using the Phone Muting a Call During a call, you can mute the microphone so you can hear the person on the line but he or she cannot hear conversation from the microphone. This is useful when there is conversation or background noise on your end. To mute or unmute a call: 1. Tap Start > Phone or press the green phone key on the FR68 Series’ keypad. 2. Make a call. 3. Tap Mute on the display to mute the audio. The Mute icon appears.
Using the Phone Figure 6-14 5. Call History - Notes Tap ok to exit. NOTE Also access notes directly from the Notes application by tapping Start > Notes. Using Speed Dial Create speed dial numbers to dial frequently called numbers with a single tap. Before creating a speed dial entry, ensure the phone number exists in Contacts. Adding a Speed Dial Entry To add a speed dial entry from the phone keypad: 1. Ensure the contact and phone number are in the Contacts list. 2.
Using the Phone Figure 6-16 Speed Dial Contact Location 5. In the Location field, tap the up/down arrows to select an available location to assign as the new speed dial entry. The first speed dial location is reserved for voice mail. 6. Tap ok to add the contact to the speed dial list. Figure 6-17 7. Speed Dial Contact List Tap ok to exit the Speed Dial Contact List. To add a speed dial entry from the Contacts window: 1. Tap Start > Contacts. Figure 6-18 2. Contacts Tap a contact name.
Using the Phone 3. Tap Menu > Add to Speed Dial. Speed Dial Contact Location Figure 6-19 4. Tap the up/down arrows to select an available location to assign as the new speed dial entry. The first speed dial location is reserved for voice mail. 5. Tap ok. Editing a Speed Dial Entry 1. Tap Start > Phone or press the green phone key on the FR68 Series’ keypad. 2. Tap Menu > Speed Dial. Speed Dial Contact List Figure 6-20 3. Tap and hold the contact name. 4. Tap Edit... . 5.
Using the Phone Deleting a Speed Dial Entry 1. Tap Start > Phone or press the green phone key on the FR68 Series’ keypad. 2. Tap Menu > Speed Dial. 3. Tap and hold the contact name. Figure 6-21 Speed Dial Delete Menu 4. Tap Delete. 5. Tap Yes to confirm permanently deleting the speed dial entry. NOTE Deleting names and phone numbers in Speed Dial does not delete the contact information in Contacts (Start> Contacts).
Using the Phone Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap Menu > Filter to show the menu. Figure 6-22 Call History - All Calls/Show Menu 4. Select a view type from the menu to display only missed calls, outgoing calls, incoming calls, or calls listed alphabetically by caller name. 5. Tap ok to exit the Call History window. Resetting the Recent Calls Counter 1. Tap Start > Phone or press the green phone key on the FR68 Series’ keypad to display the Phone keypad. 2.
Using the Phone Figure 6-24 Call History - Call Timers 5. Tap Reset. (The All Calls: counter cannot be reset.) 6. Tap ok to exit the Call Timers window. Deleting Call History Items by Call Date 1. Tap Start > Phone or press the green phone key on the FR68 Series’ keypad to display the Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap Menu > Call Timers... . Figure 6-25 Call History - Call Timers 4.
Using the Phone Call History - Tools Menu Figure 6-26 4. Select Delete all calls. Call History - Delete All Dialog Figure 6-27 5. Tap Yes. 6. Tap ok to exit the Call History window. Viewing Call Status 1. Tap Start > Phone or press the green phone key on the FR68 Series’ keypad to display the Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap an entry. The Call Status window appears. Figure 6-28 NOTE 4.
Using the Phone Using the Call History Menu Use the Call History menu to dial voice mail, access the Activation Wizard, save to contacts, view a note, delete a listing, send an SMS, and make a call. 1. Tap Start > Phone or press the green phone key on the FR68 Series’ keypad to display the Phone keypad. 2. From the Phone keypad, tap Call History. 3. Tap and hold an item in the list. Figure 6-29 Call History - Menu 4. Select an applicable item from the menu, as needed. 5.
Using the Phone 3. Tap Hold on to place the first number on hold. 4. Enter the second number and tap Talk. Figure 6-31 Call Conferencing - Conferencing 5. Tap Swap to move from one call to the other. 6. Tap End or press the red phone key on the FR68 Series keypad to end each call. Conference Call NOTE Conference Calling and the number of conference calls allowed may not be available on all services. Please check with your service provider for Conference Calling availability.
Using the Phone Figure 6-35 Creating a Conference Call 6. Tap Hold to place the conference on hold. 7. Enter another phone number and tap Talk. 8. After the call is answered, tap Menu > Conference to place all the calls in conference mode. 9. Repeat steps 6 through 8 for up to six phone numbers. 10. Tap End or press the red phone key on the FR68 Series keypad to end the conference call. NOTE To speak privately with one party during a conference call, tap Menu > Private.
Using the Phone Viewing Text Messages To view a text message: You can view a text message whether the phone is on or off. When the phone is on, you can view a text message from its notification callout. Tap the text message notification icon on the navigation bar to display the message. Figure 6-38 New Text Message Notification The Caller Identification feature matches incoming text message numbers with those stored in Contacts so you know who is sending you a message.
Using the Phone Tap Text Messages. Text Messaging on Today Screen Figure 6-40 The Messaging window appears. Messaging Window Figure 6-41 2. In the message list, tap a Text Messages. Figure 6-42 Text Messages List 3. Tap Reply to reply the message. NOTE If the phone is turned off and you tried to call the sender, send a reply, or forward the message, you are prompted to turn the phone function on.
Using the Phone Sending a Text Message To create a text message: 1. On the Phone screen, select a contact name that you want to send a message to. 2. Tap Menu > Send Text Message. Figure 6-43 3. Phone Screen Contact List Compose your message. Address Area Message Area Figure 6-44 z z z Create Text Message The auto-correct feature automatically fixes common spelling errors as you type so your messages are more accurate.
Using the Phone Figure 6-45 4. Message Options Window Tap Send when you've finished the message. If the phone is turned on, your text message is sent. If it’s off, you are prompted to turn on the phone. If you do so, the message is sent; otherwise when you tap ok, the message is saved in the Drafts folder and sent when the phone is turned on. If you are out of coverage area, the message is saved in the Drafts folder and sent when you return to a coverage area.
98
GSM Configuration Chapter 7 GSM Configuration Introduction This chapter explains how to verify FR6874 and FR6876 service on an Global System for Mobile communications (GSM) wireless network and establish settings. GSM networks deliver mobile voice and data services, such as Short Message Service (SMS)/Text Messaging, with full roaming capabilities across the world. High-speed Downlink Packet Access (HSDPA) enabled networks offer Internet-based content and packet-based data services.
GSM Configuration 2. Verify active phone and data services by tapping to display the Phone dialog. The Carrier name appears in the dialog box. Figure 7-1 Connectivity Dialog 3. Verify SIM card functionality: a. Tap Start > Settings > Personal tab > Phone icon > Network tab. Figure 7-2 Phone Settings Window - Network Tab b. Ensure the service provider’s network appears in the Current network: field. c. If the network does not appear, tap Find Network.
GSM Configuration Figure 7-3 3. Connections Window Under My ISP select Add a new modem connection. Figure 7-4 Connections Window - Make New Connection 4. Enter a connection name in the Enter a name for the connection: text box. 5. Select Cellular Line (GPRS) from the Select a modem: drop-down list. 6. Tap Next. Figure 7-5 Connections Window - Access Point Name 7. Enter the APN from the service provider in the Access point name: text box. 8. Tap Next.
GSM Configuration Figure 7-6 Connections Window - User Name & Password 9. Enter a username in the User name text box, if required by the service provider. 10. Enter a password in the Password text box, if required by the service provider. 11. Enter a domain name in the Domain text box, if required by the service provider. 12. Tap Finish. 13. Tap ok to exit Connections. Establishing a Data Connection 1. Ensure a SIM card is installed in the FR6874/FR6876. 2. Configure a GPRS data connection.
GSM Configuration Figure 7-8 Data Connection 8. Select Connect. Figure 7-9 Connecting Using GPRS 9. If the SIM card is protected with a Personal Identification Number (PIN), a dialog box pops up requesting the appropriate PIN to unlock the SIM card. In this case, enter the PIN and tap ok. NOTE Place emergency calls at any time, without entering a PIN or a SIM card. 10. When a connection is established, launch Internet Explorer to browse the Internet or launch an applicable application.
GSM Configuration Figure 7-10 Connectivity Dialog Box 2. Tap Disconnect. NOTE Tapping Disconnect during an active data transfer (e.g., downloading a web page) automatically reconnects the connection. You cannot disconnect the connection until the data transfer is complete. Settings Use the Phone Settings window to customize settings, such as the ring type and ring tone for incoming calls, security options, and other options depending on the type of service.
GSM Configuration 3. Select a ring tone for incoming calls from the Ring tone: drop-down list. To hear a sample of the selected ring tone, tap NOTE 4. . Tap to end the ring tone. To use custom .wav, .mid, or .wma files as ring tones, use ActiveSync on the host computer to copy the file to the /Windows/Rings folder on the FR6874/FR6876. Then select the sound from the ring tone list. Select a keypad tone from the Keypad: drop-down list.
GSM Configuration 4. Use the touch keypad to enter a new four to eight digit PIN. 5. Tap Enter. 6. Reenter the new PIN for confirmation and tap Enter. 7. Tap ok to confirm the change. Disabling a PIN 1. From the Phone tab (Figure 7-11), deselect the Require PIN when phone is used check box. 2. Use the touch keypad to enter the current PIN. 3. Tap Enter. 4. Tap ok to confirm the change. 5. Tap ok to exit settings.
GSM Configuration Figure 7-14 Call Barring/Call Blocking Caller ID Enable caller ID to reveal the identity of the person making an outgoing call. Select the Everyone radio button to always display the caller ID. Select the No one radio button to prevent the caller’s identity from appearing to others. Figure 7-15 Caller ID Call Forwarding NOTE Call Forwarding may not be available on all networks. Check with your service provider for availability.
GSM Configuration is turned off or the user is unreachable. Busy: enter the phone number to receive forwarded calls only when the line is busy. Figure 7-16 Call Forwarding Call Waiting NOTE Call Waiting may not be available on all networks. Check with your service provider for availability. Call waiting notifies you of an incoming call when the phone is in a phone session. Select the Notify me radio button to enable call waiting. Select the Do not notify me radio button to disable call waiting.
GSM Configuration Figure 7-18 Voice Mail and Text Messages Fixed Dialing Use Fixed Dialing to restrict the phone to dial only the phone number(s) or area code(s) specified in a Fixed Dialing list. 1. Select Fixed Dialing and tap Get Settings. Figure 7-19 Fixed Dialing Window 2. Select the Enable fixed dialing check box. 3. To add a number to the list, tap Menu > Add. 4. Enter the phone number or area code to restrict and tap Done. 5.
GSM Configuration Changing Networks Manually 1. Tap Start > Settings > Personal tab > Phone icon > Network tab or Start > Phone > Menu > Options >Network tab. Figure 7-20 FR6874/FR6876 Phone Window - Network Tab 2. From the Network selection drop-down list, select Manual. Figure 7-21 Choose Network 3. From the Choose Network window, select the network to use. 4. Tap OK. Viewing Available Networks To view all wireless networks available: 1.
GSM Configuration 2. Tap Find Network. Figure 7-23 Choose Network 3. From the Choose Network window, select the network to use. 4. Tap OK. Setting Preferred Networks Set networks in a preferred order of access. Setting preferred networks allows the FR6874/FR6876 to access a second preferred network if the first is unavailable. 1. Tap Start > Settings > Personal tab > Phone icon > Network tab or Start > Phone > Menu > Options > Network tab. Figure 7-24 FR6874/FR6876 Phone Window - Network Tab 2.
GSM Configuration 4. Tap Move Up and Move Down, as necessary, to place the selected networks in the preferred order. 5. Tap ok to send the new settings to the network. 6. From the Network tab, select Automatic from the Network selection drop-down list. 7. Tap ok to exit settings. Phone Info Use the Phone Info tab to view hardware and software information about the phone. 1. Tap Start > Settings > Personal tab > Phone icon > Phone Info tab or Start > Phone > Menu > Options > Phone Info tab.
Accessories Chapter 8 Accessories Introduction FR68 Series accessories, listed below, provide a variety of product support capabilities. z Single Slot USB/Serial Cradle - Charges the FR68 Series main battery and a spare battery. Synchronizes the FR68 Series with a host computer through a USB connection. z Four Slot Battery Charger - Charges spare standard and high capacity batteries. z Auto Charge Cable - Plugs into a vehicle cigarette lighter to charge the FR68 Series while on the road.
Accessories Charging the FR68 Series Battery Connect the cradle to power. Insert the FR68 Series into the slot to begin charging. NOTE Insert the adaptor module into the cradle before inserting the FR68 into the cradle.. * It is recommended that this product be charged for 24 hours before the first use to ensure that the internal battery is fully charged.
Accessories The 1950 mAh battery is fully charged in less than four hours, and the 3600 mAh battery, in approximately six hours. Charging Temperature Charge batteries in temperatures from 0°C to 45°C (32°F to 114°F). Charging is intelligently controlled by the FR68 Series. To accomplish this, for small periods of time, the FR68 Series or accessory alternately enables and disables battery charging to keep the battery at acceptable temperatures.
Accessories Spare Battery Charging 1. Connect the charger to a power source. 2. Insert the spare battery into a spare battery charging well and gently press down on the battery to ensure proper contact. Figure 8-4 Four Slot Battery Charger Battery Charging Indicators The charger has an amber LED for each battery charging well. See Table 6-1 on Page 115 for charging status indications. The 1950 mAh battery is fully charged in less than four hours, and the 3600 mAh battery, in approximately six hours.
Accessories Table 6-2 Spare Battery LED Charging Indicators LED Indication Off No spare battery in slot; battery is not charging; battery is not inserted correctly in the charger; charger is not powered. Slow Blinking Amber Spare battery is charging. Solid Amber Charging complete. Headset Use the headset to communicate via Voice-Over-IP (VOIP) or for audio playback and telephony applications.
Accessories Battery Charging and Operating Power The communication/charge cables can charge the FR68 Series battery and supply operating power. To charge the FR68 Series battery: 1. Connect the communication/charge cable power input connector to the Motorola approved power source. 2. Slide the bottom of the FR68 Series into the connector end of the communication/charge cable and gently press in until it latches into the FR68 Series.
Chapter 9 Maintenance&Troubleshooting Introduction This chapter includes instructions on cleaning and storing the FR68 Series, and provides troubleshooting solutions for potential problems during FR68 Series operation. Maintaining the FR68 Series For trouble-free service, observe the following tips when using the FR68 Series: z Do not scratch the screen of the FR68 Series. When working with the FR68 Series, use the supplied stylus or plastic-tipped pens intended for use with a touch-sensitive screen.
Maintenance & Troubleshooting Quick and easy installation Battery Safety Guidelines z The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment. z Follow battery usage, storage, and charging guidelines found in the user's guide. z Improper battery use may result in a fire, explosion, or other hazard.
Maintenance & Troubleshooting WARNING! Avoid exposing this product to contact with hot oil or other flammable liquids. If such exposure occurs, unplug the device and clean the product immediately in accordance with these guidelines. Materials Required z Alcohol wipes z Lens tissue z Cotton tipped applicators z Isopropyl alcohol z Can of compressed air with a tube. Cleaning the FR68 Series Housing Using the alcohol wipes, wipe the housing including keys and in-between keys.
Maintenance & Troubleshooting 9. Inspect the area for any grease or dirt, repeat if required. Cleaning Cradle Connectors To clean the connectors on a cradle: 1. Remove the DC power cable from the cradle. 2. Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol. 3. Rub the cotton portion of the cotton tipped applicator along the pins of the connector. Slowly move the applicator back-and-forth from one side of the connector to the other.
Maintenance & Troubleshooting Troubleshooting the FR68 Series (Continued) Problem Cause Solution Table 9-1 Rechargeable Lithium-ion battery did not charge. Battery failed. Replace battery. If the FR68 Series l does not operate, perform a cold boot. See Resetting the FR68 Series on Page 37. FR68 Series removed from cradle while battery was charging. Insert FR68 Series in cradle. The 3600 mAh battery is fully charged in approximately six hours. Extreme battery temperature.
Maintenance & Troubleshooting Troubleshooting the FR68 Series (Continued) Problem Cause Solution Table 9-1 FR68 Series shuts Battery is over-temperature. off. Battery temperature >40℃(104°F) or <-10℃(14°F) Tapping the Screen is not calibrated window buttons or correctly. icons does not activate the corresponding feature. Re-calibrate the screen. See Calibrating the Screen on Page 20. A message appears stating that the FR68 Series memory is full. Too many files stored on the FR68 Series.
Maintenance & Troubleshooting Bluetooth Connection Table 9-2 Troubleshooting Bluetooth Connection Problem FR68 Series cannot find any Bluetooth devices nearby. When trying to connect a Bluetooth phone and FR68 Series, the phone thinks a previously paired FR68 Series is used. Cause Solution Too far from other Bluetooth devices. Move closer to the other Bluetooth device(s), within a range of 10 meters. The Bluetooth device(s)nearby are not turned on. Turn on the Bluetooth device(s).
Maintenance & Troubleshooting Single Slot USB/Serial Cradle Table 9-3 Troubleshooting the Single Slot USB/Serial Cradle Symptom LEDs do not light when FR68 Series or spare battery is inserted. FR68 Series battery is not charging. Possible Cause Action Cradle is not receiving power. Ensure the power cable is connected securely to both the cradle and to AC power. FR68 Series is not seated firmly in the cradle. Remove and re-insert the FR68 Series into the cradle, ensuring it is firmly seated.
Maintenance & Troubleshooting Troubleshooting the Single Slot USB/Serial Cradle(Continued) Symptom Possible Cause Action Table 9-3 Spare battery is not charging. During data communication, no data transmits, or transmitted data was incomplete. r Battery not fully seated in charging slot. Remove and re-insert the spare battery in the cradle, ensuring it is firmly seated. Battery inserted incorrectly. Re-insert the battery so the charging contacts on the battery align with the contacts on the cradle.
Maintenance & Troubleshooting Cables Table 9-5 Troubleshooting the Cables Symptom FR68 Series battery is not charging. During data communication, no data transmits, or transmitted data was incomplete. Possible Cause Action FR68 Series was disconnected from AC power too soon. Connect the power cable correctly. Confirm main battery is charging under Start > Settings > System > Power. The 3600 mAh battery is fully charged in approximately six hours. Battery is faulty.
Technical Specifications Appendix A Technical Specifications FR68 Series Technical Specifications The following tables summarize the FR68 Series’ intended operating environment and technical hardware specifications. FR68 Series Technical Specifications Item Description Physical Characteristics Dimensions Length: 141.5 mm (5.57 in.) Width: 65.9 mm (2.59 in.) Depth: 23.5 mm (0.93 in.) with a 1950 mAh battery or 27mm (1.06 in.) with a 3600 mAh battery Weight 252g (8.
Technical Specifications Table A-1 FR68 Series Technical Specifications (Continued) Item User Environment Operating Temperature Storage Temperature Charging Temperature Humidity Drop Specification Electrostatic Discharge (ESD) Description -10°C to 40°C (14°F to 104°F) -30°C to 60°C ( -22°F to 140°F) - without battery 0° C to 45° C(32°F to 113°F) 90% non-condensing 4 ft. drop to concrete, 1 drop per 6 sides at ambient temperature 23°C (73°F). 3 ft.
Technical Specifications Table A-2 Item Laser Decode Capability Data Capture Options Description Code 39 Codabar Interleaved 2 of 5 supplementals Code 128 Code 11 EAN-8 UPCA Chinese 2 of 5 Code 93 Discrete 2 of 5 EAN-13 UPCE UPC/EAN Trioptic 39 FR68 Series Accessory Specifications Single Slot USB/Serial Cradle Single Slot USB/Serial Cradle Technical Specifications Description Item Length: 145.4 mm (5.72 in.) Width: 110.5 mm (4.35 in.) Height: 91 mm Dimensions (3.58 in.) Weight 196 g (6.
132
Glossary Glossary B Bar. The dark element in a printed bar code symbol. Bar Code. A pattern of variable-width bars and spaces which represents numeric or alphanumeric data in machine-readable form. The general format of a bar code symbol consists of a leading margin, start character, data or message character, check character (if any), stop character, and trailing margin. Within this framework, each recognizable symbology uses its own unique format. See Symbology. Bar Code Density.
Glossary specific bar code scanned. E ESD. Electro-Static Discharge F Flash Memory Flash memory is nonvolatile, semi-permanent storage that can be electronically erased in the circuit and reprogrammed. FR68 Series mobile computers use Flash memory to store the operating system (ROM-DOS), the terminal emulators, and the Citrix ICA Client for DOS. H Hz. Hertz; A unit of frequency equal to one cycle per second. Host Computer.
Glossary L LASER. Light Amplification by Stimulated Emission of Radiation. The laser is an intense light source. Light from a laser is all the same frequency, unlike the output of an incandescent bulb. Laser light is typically coherent and has a high energy density. laser scanner. A type of bar code reader that uses a beam of laser light. LED Indicator. A semiconductor diode (LED - Light Emitting Diode) used as an indicator, often in digital displays.
136
Index Calibrating the Screen .......................... 20 Call History ........................................... 87 Changing the Backlight Settings........... 23 Changing the Power Settings ............... 23 Chapter Descriptions ............................ 12 Charging Temperature ...........20, 115, 116 Cleaning ............................................. 120 Clock & Alarms ..................................... 31 cold boot ...............................................
Index Phone ................................................... 28 Phone Software .................................... 12 Pictures & Videos ................................. 29 Powering On the FR68 Series .............. 20 Radio Status ......................................... 36 Replacing the Main Battery .................. 22 Scanner Exit Window ......................... 121 Scanning Considerations...................... 44 screen protector.................................. 119 Screen Protector............
Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http://www.motorola.com MOTOROLA and the Stylized MLogo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. © Motorola, Inc.
