Mobile Workstation 800 Series Owner's Manual Model F5207A, F5217A

51
Appendix H: CPU Factory Default Setting
WLAN adapter - ON
Power source - 13.8V
Turn-off command from display - ENABLE.
Critical turn off - ENABLE
Power button presence - ENABLE
Ignition boot up preference - POWER ON
Ignition shut down preference - NONE
Ignition shutdown timer - 3 min
Heater optimization - 0ºF
Radio status on power up - ON
Main radio power switch - ON
Radio ring indicator (RI) - ENABLE
System ring indicator (RI) mask - DISABLE
IDEN programming mode - OFF
SB9600 mode - OFF
GPO0 state on power up - OFF
GPO1 state on power up - OFF
GPS state on power up - OFF
GPS mode - TSIP (Trimble GPS receiver)
- NMEA (u-Blox GPS receiver)
Auxiliary 5V output - ENABLE
Auxiliary 12V output - ENABLE
Hard disk maintenance when device is off - 16 hours