ES400 Quick Start Guide
© 2010 MOTOROLA, INC. All rights reserved. Motorola reserves the right to make changes to any product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
ES400 Battery Cover Charging/Communication Contacts Illumination Light Camera Lens Finger Print Reader LED Indicator Receiver Ambient Light/Proximity Sensor Speaker Touch Screen Camera Button Optical Nav Pad Power Button Secondary Microphone (Speakerphone Mode) Headset Port microUSB Port Volume Buttons LED Aimer Stylus Keypad Programmable Button Scan Button Speaker Primary Microphone (Handset Mode) 3
Features Accelerometer The ES400 offers the following features: The ES400 responds to movement using a built-in accelerometer. When you rotate the ES400 from portrait to landscape, the accelerometer detects the change and rotates the display accordingly. Motorola Home Screen The Motorola Home Screen provides faster and easier access to features and applications and allows users to tailor the interface to improve their unique workflow and maximize efficiencies.
Getting Started for the First Time Remove the Battery Cover The activation process is dependent upon your carrier. If you are using a GSM carrier, you must install a SIM card prior to installing the battery. To remove the battery cover: To get started: • • • • Remove the battery cover. Install an microSD card (optional) Install a SIM card (GSM Only) Install the battery. 1. Hold the ES400 firmly in two hands as shown. 2. With thumbs, push battery cover toward the bottom of the ES400. 3.
Install a microSD Card (Optional) 6. Close the microSD card holder. 1. Slide the SIM card holder up to unlock. 7. Slide the microSD card holder to the left to lock. 2. Lift the SIM card holder. Install a SIM Card (GSM Only) 3. Slide the microSD card holder to the right to unlock. 4. Lift the microSD card holder. 5. Insert the microSD card into the holder as shown. 6 1. Slide the SIM card into SIM card holder as shown.
2. Close the SIM card holder. 1540 mAh Battery Shown Battery Lock Latch 3. Ensure that the SIM card is fully seated and flat. 4. Slide the SIM card holder toward the bottom of the device to lock. The ES400 will not turn on with the battery cover removed. NOTE 6. Replace the battery cover. Install the Battery 1. Remove the battery from the packaging. 2. Locate the battery contacts. 3. Insert the battery into the battery well with the contacts facing down and to the right. 4.
Charge the Battery To charge the battery: 1. Select the appropriate clip plug for your country. 2. Slide the clip plug into the power supply until it locks into place. 3. Plug the included 4. 5. 6. 7. 8 Rapid Charge USB cable into the rectangular slot in the power supply. Plug the power supply into AC wall outlet. Lift rubber flap on the side of the ES400. Plug the micro-USB connector into the USB port. The LED indicator blinks green indicating that the battery is charging.
Carrier Activation GSM/UMTS Activation 3. On the CDMA Setup tab, select a carrier from the preferred network option. 4. Tap the Start Activation button. Upon start up, the ES400 looks for an installed SIM card. 5. Tap Yes to activate. If a SIM card from a supported carrier is installed, the ES400 detects the installed SIM card and activates on the GSM/UMTS network and configures the data connections. existing phone to request over-the-air activation. 7. Press Activate Now button. 6.
If switching from one carrier to another, refer to the ES400 User Manual for detailed information. NOTE Keypad End Call Key Call Key OK Key Optical Nav Pad Scan Key The Shift key changes the state of the alpha characters from lowercase to uppercase. Press the Shift key to activate this mode temporarily, followed by another key. This displays the icon at the bottom of the screen, until a second key is pressed. Press the Shift key twice to lock this mode.
Power Button LED Indicator Use the Power button to place the ES400 in suspend mode or to power off the device. LED Indicator Suspend To force the ES400 to suspend, press the power button. Power Off To power off the ES400, press the power button for at least five seconds. When the dialog box appears, tap Power Off.
Locking the Device Lock the device to protect your information and to prevent unwanted key presses. You can set the Lock to access the device with or without a password. You can also un-lock the ES400 using biometrics (fingerprint) when the Motorola Lock Plus feature is used (Refer to the ES400 User Guide for more information on setting up the lock feature). The ES400 goes into lock mode when you press the Power button or after a pre-defined time-out.
Motorola Home Screen The Motorola Home screen provides a new user interface that allows the user to quickly access information using customizable cards. Use your finger to slide the card left and right to view additional cards by sliding the cards to the left or right. By default, the ES400 contains four cards; Simple Home card, Full Home card, Weather card and the Time Tracker card.
My Apps Device Management Window From the Home screen, tap My Apps to open the Application window. Tap an icon to open a program. The Device Management window provides the user with options to: Use your finger to slide the window up and down to view more program icons. Program Shortcuts The Program shortcut buttons provide quick access to up to four favorite programs. Tap the shortcut button to launch the program.
Calling Call Line To make a call: 1. Press on the Contacts To add a new contact: keypad. 2. Use the keypad or on-screen dialpad to enter the phone number. The number appears in the Call Line. Press or tap the Call Line to start the call. 3. Press To ignore an incoming call, press the red End key or the Ignore button. on the keypad or tap on the Call Line to end the call. To answer a call, press on the keypad or the Answer button on the Incoming Call screen. 1. Tap Contacts. 2. Tap . 3.
Send an SMS or MMS Message Scan a Bar Code To send a text (SMS) or picture/video (MMS) message: To scan a bar code: 1. Tap Start > Text or 2. Press the Scan key on the Motorola Home screen. 2. Tap Menu > New > SMS to send a text message or MMS to send a picture or video message. Take a Photo To take a photo: 1. Press and hold the Camera button on the right side of your ES400 to activate the camera. 2. Rotate the ES400 to the horizontal position (for landscape orientation) and frame your subject.
Visit a Web Page Connect with a Bluetooth Device To open the browser window tap Start > Internet Explorer. To connect to a Bluetooth device: 1. In the Address field, enter a web address. 1. Ensure the device you are connecting with is in discoverable mode. 2. Tap Start > Settings > Bluetooth. 2. Press Enter. Enter Address 3. On the horizontal scroll, select Mode. Favorites 4. Select Turn on Bluetooth checkbox. 5. On the horizontal scroll, select Devices. 6. Tap Add new device.
Connecting to a Wi-Fi Network The ES400 supports managing the WLAN using the Motorola Fusion software (default) or the Windows Zero Config (WZC) software. Refer to the ES400 User Guide for procedures on switching between the Fusion and the WZC software. To manage a wireless network on the ES400, tap Status Bar > .
Accessories Single Slot USB Charging Cradle Vehicle Holder Soft Holster Commercial Auto-Charge Cable Consumer Grade Auto-Charge Cable USB Host Adapter 19
Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA 1-800-927-9626 http://www.motorola.com MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. © Motorola, Inc.
