Car Satellite Radio System User Manual

DSR-6400 Series 97
Fast Facts 9 (Archive)
The Fast Facts 9 screen displays the unit’s current user-selected message from the list of all messages within
the Archive. Messages appear in this list after being moved here from the Inbox screen (Fast Facts 8).
Field Name Definition
Number of Archived
Messages
Displays the number of messages (0 to 300) that are currently in the Archive. For
more details, see the above note.
Message Drop
Count
Indicates the number of messages that were dropped due to a system overflow. A
system overflow occurs when the 300-message maximum is exceeded, as
described in the above note. If 0 appears in this field, no Archive messages have
been dropped since the most-recent factory reset. If 1 appears in this field, 301
messages have arrived since the most-recent factory reset and the oldest mes-
sage was automatically purged. If 2 appears in this field, 302 messages have
arrived and the two oldest messages were automatically purged. Etc.
Message Number Displays the message number that is currently being displayed from the Archive.
To display a different message, use the
4
buttons to scroll through the mes-
sages. If a 1 appears in this field, it designates the message was moved to the
archive before all other archived messages. If this value is the same value as the
field for Number of Archived Messages ( ), it designates the message is the
most-recently archived message.
To exit the message, press ENTER.
Page ID Message Page ID. This number is a running count of the mail messages that
were sent from the BNC (uplink provider).
CRC Message’s Cyclic Redundancy Check (CRC) value code.
Received Time Displays the date and time at which this message was received at the decoder.
The time is shown in GPS, as defined at the uplink.
Message Text Displays the text message.
Archived Time Display the date and time at which this message was moved to the Archive. The
time is shown in GPS, as set up from the uplink.
Note: The unit will maintain up to 300
mail messages between the Inbox mail
messages (Fast Facts 8) and the Archived
messages (Fast Facts 9). For example,
when the 301
st
message arrives, the oldest
message is then automatically purged. The
unit, therefore, maintains the most recent
300 mail messages. Performing a factory
reset will delete all messages from the
decoder and reset the Message Drop
Count field ( ) to 0.
B
Fast Facts 9
(ARCHIVE)
33 35
A B
C
D
G
F
1 293 3371920703
12/27/2011 17:38:05: A blackout is
scheduled for 11/01/11 at 15:00.
E
12/27/2011 21:19:35
H
A
B
C
A
D
E
F
G
H